HOW TO SET YOUR WAHL CLIPPER BLADES
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- To get the best out of your Wahl Clippers, and for the safety of those being cut with them, it's important to set your blades correctly and to keep them clean. ✨
www.coldclassics.net for Bookings
#WahlProAus #WahlAmbassador #WahlFamily #OneWahl @wahlproaus @wahlpro @coldclassicsbarbershop
#Coldclassics #Barbershop #AucklandAirport #NZ ✂️💈
#AucklandBarber #NZBarbers #barbernation #barbersinctv #barberflow #barbersociety #barberlife #barbershopconnect #barbergang #barberlove #barbergrind #barberhustle #barberpost #barbergame #barberhub #barberkonnect #barbershopkonnect #barberconnect #barberworld #clippercare #clippermaintenance #barbertools
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 2 | 29 ก.ย. 67](http://i.ytimg.com/vi/r3lfLNH6Ke4/mqdefault.jpg)
Great video, I finally understand what to do with my clippers!
Most welcome. 🙂
Best video I've seen yet, and it's all close up to see how the teeth, should line up awesome job Thank You sooooo much!!! ✌️
i love this video. I have the Moser 1400 and the power screw seems to work in the opposite way: clockwise the noise calms down (the screw goes in) and anticlockwise the noise becomes higher (and the screw comes out). However, your model is really silent, while mine only change from noisy to extremely noisy, there is not the clear separation from "silent" and "oh, it starts screaming now"
This is the best tutorial 10/10
When the screw holes are aligned with each other ...that they will fit only where they can .....whats the need to align the toothbaldes......could you explain..
Wahl done my friend.
Great job. Really helped.
Could you able to tell me the size of the screws please. Thanks
Spot on great vid thanks👍🏼
Thank you!
thanks so much!
Sigh - "..With the lever fully closed.." so is that move it to the closest or longest cut? You move it to both extreme so its not clear which one its supposed to be
I have a question about this product has a big noisy?
thanks mate!
wearing glows????? lol
I wish I would have seen this before running to the pet store to get new replacement blades which didn’t fit. After I saw this video I realized that the old blades were installed wrong and they worked like a charm. This was the best tutorial and I appreciate you taking time to share your knowledge.
Had my clippers for years then they stopped working, took them apart and cleaned them, put them back together now working and cutting smoother than brand new, nice one 👊
Great, clear instructions. They were not alligned and now they trim hair, not rip it out like before. The voltage tension section was really helpful. Thank you
This was the clearest explanation and visual for blade alignment video I have found. Thank you. It helped a great deal……
Everytime I screw down, and I use so much attention, the teeth move. I hate the Wahl system it's like they want us to fuck up the clipper
I recently bought a Wahl Legend and it needed adjusting as the stationary blade was not straight from factory. However I used this YT-video as a guide and it was REALLY easy to adjust everything using the technique of fastening one screw a tiny bit at the time. I didn't even need to hold it with a finger to stay in the same position..
BEST VIDEO!!! I've watched plenty of these tutorials just to compare, and your video is the BEST in close up photography and clearly explaining the correct WAHL recommended alignment procedure. Well done brother.
Just what I was looking for, clear instructions. Thanks 👋👍👍👍👍
adjusting the voltage screw part was great. I was about to throw away my clippers out of sheer frustration. Thanks
Tysm man😭🙏 I went to clean my clippers and uninstalled the blades and went to put it together… turns out I installed it inverted so the blades kept rubbing against each other making a loud noise😂 again thank you I realized mid way my mistake
I am glad I came across this video. Now I can try to set my blades properly
My question is about the left/right alignment of the bottom blade. The top blade moves left and right, and each time you switch on the clippers then switch it off, the top blade doesn't stop in the same position every time. So when aligning the bottom blade, how do you account for this? What position of the top blade do you go off to set the bottom blade? Thanks
Bro that was awesome. I'd chucked my filter thinking it was a stack of hair so bonus points for preventing that fuck up. Cheers!
Thank you.
I found Lanoline spray lube completely changed the way mine work. Just brilliant.
Tooth alignment is what I came to TH-cam for. Thanks man.
I bought new wahl clippers and they were pulling my hair and not cutting even after I oiled them and I watched your video and turned up the voltage.I'm good now.thanks
Should the small blade be able to move at all if you push it a lil cuz i screwed it in enough and it moves
AWESOME instructions. Thanks for sharing. Subscribed
excellent video , thanks for the skoolin' , be well
This should be the official WAHL tutorial. I appreciate the thoroughness and detail.
Oh that's a good tip with slightly tightening each screw in an alternating fashion. I kept moving the damn blade when trying to tighten it down. Very nice video.
Thanks a lot. After doing mine, i was having doubts (never been taught or seen someone do it before). Glad I'm on track
By far, BEST WAHL tune-up video I've seen. Thanks.
Soo helpful, thank you so much, and even with the bonus info at the end about tuning! I've thrown away clippers for making that grinding noise before... now I know why that was happening! Thanks!
If the cutting blade can’t sit straight but sits crooked because of the plastic piece that goes in the center of it, then it’s a manufacturing defect right? The top blade on mine can’t be angled enough to compensate for the crooked sitting bottom blade. It stays crooked since the cutting blade is held in place crooked to begin with
Mine doesn't sit too , I think the who sharpened my blades changed it
Mine's doing that now and now the dam things don't move correctly since I've cleaned the hair out of them and put the blades back on. Lol it's like the hair was keeping it together 😭
My little son threw my on the floor and cutting blade shifted off it position and when I try looking into it, it fell off. Loosing the blades I noticed the foamy is torn and the white rubber/plastic have receded inside that the cutting blade can't latch on it. What do I do to fix it and align the blades again?
Thank you! I thought I messed up my clippers but you’ve saved me 85 bucks 😂 returning the new ones I bought and they haven’t even arrived yet.
Yo definitely appreciate you taking the time to make this video for all the simple people like myself out there going to work with half their damn head shaved!! Well done bro! 🤙
You are fabulous!! Love the instructions ... and your voice tone... fantastic....! Thank you for the help....
Thanks, I've always thought I'd kept my clipper in tiptop condition, but I never aligned the blade's right way! Now i knows, thank u very much indeed!!! 🤟👍❤️🤟
I have a special needs son and hair cuts are a chore, my clippers got loud and were scaring my son. The tip on changing the voltage is a life saver, I was about to replace my clippers. Thank you.
If u need a super quiet clipper that cuts soft for your son I’d recommend the jrl onyx
Very well explained - measured and clear 👏👏👏
Very straight forward and an outstanding tutoring. Keep it up...
Thanks for this tutorial, it’s a truely really informative. (The positioning between the 1st and last tooth)
just one question, how do you measure the 0.8mm?
The reason I ask is that I have a wahl magic and I recently adjusted/zero gapped it, and I’m not sure if it’s made things better for me, I feel that it may have made things abit harder to see (too close) on a fade (when setting a no guard open guideline & #1 guard open guideline)
I’m thinking of changing it back to the factory setting, hence watching this video.
I'm not sure this is the way... th-cam.com/video/g8YuS1Kka2M/w-d-xo.html#t=44: "The extreme left-hand tooth on the top blade should be positioned so it is over the gap between the 2 left-hand teeth of the lower blade".
Thank you! First, you helped me to become familiar with my new Wahl (battery type, made in Vietnam, no adjustments here, but mechanics similar), then I decided to check my ages-old SF-938 haircut machine, too, which has the same parts but much bigger (45mm, to be plugged into the mains only), get out approx. a pound of hair stubbles from the inside and do maintenance and adjustment after reassembly according to your instructions, too. It is amazing how silent that one has become now 😅.
I had all the information except the side screw voltage adjustment. I was trying to find the sweet spot for the stationary blade screw tightness since when I tightened it completely the cutting blade would not move. I could cut a bit then the screws would loosen to much and cause issues. This was perfect now I can keep a nicely manicured beard and mustache. Thank You!
Wow that was a useful video , thanks for posting it .
God bless you bro. Just got it. Shaved, bathed and now in Church. This is my 1st time resetting the blades of my clipper myself. And the problem was that the lever didn’t lap well with the new blades grove. So I trimed the lever a bit. Made it ever all the way, then when i screwd it tight it didn't lap. Then i loosed it and made it sit on the lever and carefully placed the blades and screwed gently to hold and reposition the little blades untill they lapped as you showed us the teeths should lapped then tightened and started it and the blades didn't fall off this time as did after the vendors set it themselves.
But then it made a loud noise then i screwed the voltage screw up n down till the sound was gentle n smooth. Then shaved the hair on my hand to make sure its working ir did. Then shaved myself neat and jumped in n out the bathroom n out to Church. Just singing the Entrance him now b4 the Priest comes in.
Took me about 45mins to sort it. Got it on the 3rd time. Almost gave up cos was running late to Church.
Thanks to you i look good on my bday.
What was that soft felt hairy piece you removed from between the blades (0:30)?
I do not have that on my unit.
it's a filter preventing the hairs go to the motor, my old wahl had it but my new doesn't
@@slowswimmer9169 you think we should improvise something if we do not have it in the new ones?
@@gt-c- I really don't know what can we use, some using a piece of sponge as I've read
Thanks a lot brother for this well explainatory clear visual tutorial. So so helpful. Will go practice it now. They fixed it for me where I bought the blades but coming back home to use it turning it on the inner blades kept shifting. So watching this video whilst eating, now i have courage to DIM. Thanks again bro. It's my bday today "Sunday". Not had time all week to go to the barbers n still don’t even have time today "my bday" as it is the deadline for some assignments i have to submit" but i still want to look good on my day.
Thanks again. Will let you know when it works. Cheers. Just about to take a shower n head to Church.
Thanks for showing this 👌
Had to come back to the video , got to remember the basics sometimes!!
Lawareshlashmacenepostofficecontrolefoodignouprivateuneversety
Not gonna lie beginner barber here I js lost my damn screw and it buzzed I did what u did that shit buzzed more 😂 I’m lokey pissed
With mine it seems that the white thing is crooked and won’t cut its tuned food and zero gaped ever since I tuned it , it Went that . Any tips my bro ? 🤙???
A little constructive criticism, when you are teaching people, the music doesn't help when you're not talking very clear it's hard to hear you there's no reason for the music
thank you so much. I should have watched this video long ago.
Thanks bro, for years I've been wanting to know how to tune my machines.
First tooth of stationary blade doesnt lie on second of moving one yet it cuts alright.
But how to trim without scratching on beards skin?
I have one clipper that’s zero gapped all the way to the end of the stationary blade to erase trimmer line and the rest of my clippers are like yours
Thank bro. Very educational and clear instructions.
Thank you, I was wondering how to properly tune it, this did it.
Thank u man very much..dis video is very informative 👍
What do you do if you lose or misplace your filter for your Wahl ?
Can you get a replacement ? Where at ?
Thanks, you saved me money that I didn't have to spend. #lifesaver
Great video!
But I have a problem. My clippers made a loud sound before. I re adjusted the blades and it stopped without adjusting the power screw.
It started again and I tried readjusting the blades and power screw again. Blades are aligned. But the sound is very loud and even after power screw adjustment. What do I do now?
I definitely broke mine. Have to buy a new set now 😢
Bende aprilla marka traş makinesi var başlıkları 2 si hiç kesmiyor körelmiş nasıl bilenir
Turns out that I've been zero gapping for years without knowing , thought clippers were not set right out the box as standard and by common sense, thought we all had to adjust them ourselves 😂, so I did,
Good hairstyles ❤❤
Yo mate, I was having an issue with my clippers.
I watched your video and followed what you said to do.
It's late now to be making clipper noises, so I will update you in 2 days.
thank you!! Subscribed
Garcia Michelle Miller Donald Martin Karen
Be careful people. If you adjust the blades too close, you will cut yourself badly. Otherwise, great video.
Walh clippers seem a little temperamental, imho. I think i am going to shop for ky next set, that does not have that adjuster arm. Im more than happy with guard attachments to give my desired hair length
Thanks for this information. Hopefully my trimmer won't rip my hair out like last time! 😂
The white plastic in the middle has shifted to the corner 😥 I don't know what to do. I thought the first clipper was supposed to go over the plastic , but you didn't put it on. Been wasting my time trying to put it over it😅
How often do you do this maintenance?
Thank you for the cleaning and alignment advice. Does anyone know how to get a replacement for a damaged foam hair filter? Is that really necessary or is it OK to operate the device without one?
I was on 1 blade short from going bald and going to the shop looking like the 3 stooges I was determined and fixed and oiled it up like new thanks
Best vidio
Boss mgkano b reasor na gaya sau boss
No me gustó el peine quedó más inclinado de un lado que del otro O sea no quedó bien alineado además quedó muy retirada la hoja de encima con respecto a la hoja de abajo por lo tanto a rebajar los vellos estos van a quedar igual no quedarán bien cortados video muy básico y además malo☹☹☹☹☹☹
Tha man! well explained shot bro now when i get back home from my holiday gonna try this thought my clippers were broken lolz..👍
big suprise. they still suck
Thanks brother, almost gave myself a vasectomy with the way I had tightened it
Why does another video say set the left last tooth between the the left last gap on the moving blade?
Great. Thank you.
Can I use it for dog?
Cheers!
Sweet as, Bruv.
I can't seem to get it correctly. It makes an ungodly noise...
Great video!
Thank you buddy one year problems👍👍❤
Y is the two blade not equal?? Cus in my place we use the clipper for lineup too
Whats the model
i just bought a blade replacement and 1 tooth is half the length of the others. Will that cause me a problem?