Thanks! That is the side effect of tip on function. If you put things into the drawer to make it heavier, it shall be easier to close. If the issue still exists, then you probably can choose a tip on device with lower weight rating. Blum tip on device has several different weight ratings.
does the tip-on mechanism also function as a latch? meaning; the drawer will stay closed even when pulling, tugging on it (or sliding open with weight)?
Thank you! If I remember correctly, it shall be 3mm. The manual of tip on device should specify this. This gap is needed for tip on mechanics to react and then push out the drawer.
Not sure if I understand your question correctly. Are you referring to inset drawer? If yes, then you can definitely do so. You just need to use different runner setback. From this link, you can find a Blum Movento tech doc. drive.google.com/file/d/1WFhM0YkrGr6xEyVpNiEfG7gxouEXsfNx/view?usp=sharing On page 24 & 25, you can find information about inset drawer and runner setback.
nice explanation with demo. the problem is i have to pushing hard to close the drawer, possible to adjust?😊
Thanks! That is the side effect of tip on function. If you put things into the drawer to make it heavier, it shall be easier to close. If the issue still exists, then you probably can choose a tip on device with lower weight rating. Blum tip on device has several different weight ratings.
does the tip-on mechanism also function as a latch? meaning; the drawer will stay closed even when pulling, tugging on it (or sliding open with weight)?
tip on mechanism does not impact the pulling. The drawer can still be pulled out with a little bit of force, just like normal soft close drawers.
Hi . Great video . By the way what did you use for plywood finish ? Any wax oil or varnish ?
Thank you! I used rubio monocoat.
@SunridgeStudio which rubio as there are so many
@@danthechippie4439 Rubio Monocoat Super White
when that domino didn't go in first shot "one of us! one of us!"
You make it look so easy. Thanks for sharing! Where is the Tip-On in this demo?
For tip on, see 4:37 of the video
Great video
One of the best I’ve seen yet
I have one question
How much of a gap is left between cabinet face and drawer face back? Thanks in advance
Thank you! If I remember correctly, it shall be 3mm. The manual of tip on device should specify this. This gap is needed for tip on mechanics to react and then push out the drawer.
Nice demo! Thankyou!
Hi, have you ever installed this system but with drawers who are with interior front face?
Not sure if I understand your question correctly. Are you referring to inset drawer? If yes, then you can definitely do so. You just need to use different runner setback. From this link, you can find a Blum Movento tech doc. drive.google.com/file/d/1WFhM0YkrGr6xEyVpNiEfG7gxouEXsfNx/view?usp=sharing
On page 24 & 25, you can find information about inset drawer and runner setback.