ColorMFA Install - 2004 2.7t Audi Allroad

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024
  • Quick rundown of the install of the ColorMFA system in my Audi Allroad.
    ColorMFA
    www.colormfa.ru
    Custom gauges by Gauged
    www.gauged.ca
    Music
    29 Ghosts IV - Nine Inch Nails

ความคิดเห็น •

  • @kearneyboy
    @kearneyboy 3 ปีที่แล้ว

    Brilliant execution

  • @B5S4Deep
    @B5S4Deep 3 ปีที่แล้ว +1

    Hi, where did you get the custom Allroad gauge faces?
    Love the mods on your C5!

  • @ДенисРубцов-ч5ж
    @ДенисРубцов-ч5ж 2 ปีที่แล้ว +1

    Почему буст не показывает?

  • @Kiss__Kiss
    @Kiss__Kiss 2 ปีที่แล้ว

    Is this still available? if so, do they make them for a 6 speed manual here in the US?

  • @johnperry3918
    @johnperry3918 3 ปีที่แล้ว

    I went to the website by clicking the link but there is no option for purchase? Where can I buy this?

  • @mali3262
    @mali3262 2 ปีที่แล้ว

    Salut c'est compatible avec seat ibiza 6l 2007?

  • @aminjambo9201
    @aminjambo9201 3 ปีที่แล้ว

    How do you become a beck blade from kmh and rpm have you a link for me

  • @raymondsuarez7632
    @raymondsuarez7632 4 ปีที่แล้ว

    How would I get one for my 2005 Audi A6 Allroad Quattro 4.2l left hand drive car?

  • @gokhansamurtali6975
    @gokhansamurtali6975 4 ปีที่แล้ว

    How can I purchase this for 2000 TT 1.8T Quattro and 99 A4 1.8T quattro ?

  • @jairoeguren
    @jairoeguren 4 ปีที่แล้ว

    When I buy this for audi a6 c5

  • @raymondsuarez7632
    @raymondsuarez7632 4 ปีที่แล้ว

    Can do build one for 05 allroad 4.2L?

  • @MrStroller4u
    @MrStroller4u 5 ปีที่แล้ว +1

    you my friend are a mad scientist! love it... DIY guide?

  • @klutzycarlover
    @klutzycarlover 5 ปีที่แล้ว

    Any idea if this would work with the CAN info from a standalone ecu?

  • @gplusgplus2286
    @gplusgplus2286 6 ปีที่แล้ว +1

    Very nice. What software+cable you used to read/write eeprom? Looking to retrieve the dashboard pin code from my 2001 TT

    • @UncommonManFromEarth
      @UncommonManFromEarth  6 ปีที่แล้ว +1

      VAG eeprom programmer + a standard KKL 409.1 cable
      It's very easy to do, it should be compatible with your TT.

    • @gplusgplus2286
      @gplusgplus2286 6 ปีที่แล้ว

      @@UncommonManFromEarth thanks for the quick reply. This is the same with the VCDS cable or not?

    • @UncommonManFromEarth
      @UncommonManFromEarth  6 ปีที่แล้ว +1

      @@gplusgplus2286 Not sure that would work with a VCDS cable, but a KKL 409.1 cable is very cheap anyways.

    • @julienreduron955
      @julienreduron955 6 ปีที่แล้ว

      @@UncommonManFromEarth it works also with the vcds cable, just click on usb in the options tab

    • @gplusgplus2286
      @gplusgplus2286 5 ปีที่แล้ว

      @@UncommonManFromEarth hey went and bought the blue KKL 409.1 cable (took forever to arrive) but it won't read anything on vag eeprom programmer 1.19g except engine fault codes. Gives timeout errors or wrong baudrate. The blue cable also works with vcds-lite irrespective of driver used on WIn7 32bit. Ideas to retrieve that PIN?

  • @turborudi5738
    @turborudi5738 6 ปีที่แล้ว

    hey. I have received mine today :D. Could you help me a bit? When you spliced into the ecu loom for the map sensor signal, what gauge wire did you use, and how did you get it into the cluster, did you use a connector or something so that the cluster can be easily removed if it's the case?

    • @UncommonManFromEarth
      @UncommonManFromEarth  6 ปีที่แล้ว

      turbo rudi
      Hey!
      Actually I haven't wired the boost gage yet! There is a pdf that explains how to connect it. You can download it here:
      drive.google.com/file/d/1kHFlbQNREMAKVm1CxUQq72nfDYRxetzZ/view?usp=drivesdk

    • @turborudi5738
      @turborudi5738 6 ปีที่แล้ว

      thanks. I will probably do the same, first install the colormfa then wire the boost pressure and the comfort control module. Thanks for the help!

    • @turborudi5738
      @turborudi5738 6 ปีที่แล้ว

      very nice car btw. 2.7TTs are dream engines:D

  • @oofol
    @oofol 6 ปีที่แล้ว +2

    Nice one Nejib! Will get one of those as well (some day ;p)

    • @UncommonManFromEarth
      @UncommonManFromEarth  6 ปีที่แล้ว +1

      Thanks, gives a modern feel to the interior, it's a very good mod for C5 owners.

    • @oofol
      @oofol 6 ปีที่แล้ว

      Yeah I lkie few options on it ;) Benn looking at it sice over a year now ;) theres always other expences though

  • @ItsKevinBroPSN
    @ItsKevinBroPSN 4 ปีที่แล้ว

    What do I need to clone my kms onto another cluster?

    • @UncommonManFromEarth
      @UncommonManFromEarth  4 ปีที่แล้ว +1

      A VAG Kkl 409.1 cable and VAG Eeprom Programmer

    • @Frankie_Freedom
      @Frankie_Freedom 4 ปีที่แล้ว

      @@UncommonManFromEarth how do we know if we have the right cable? How can we test that

    • @UncommonManFromEarth
      @UncommonManFromEarth  4 ปีที่แล้ว

      @@Frankie_Freedom just get a cable from a good source with verified feedback. It's a generic cable so anyone should work.

    • @Frankie_Freedom
      @Frankie_Freedom 4 ปีที่แล้ว

      @@UncommonManFromEarth thanks I actually have 2 cables one I think is from a better source. When my swap is ready going to give it a try

  • @julianskill6778
    @julianskill6778 3 ปีที่แล้ว

    Salut tu pourrais me faire le montage stp si j'en achètes un

  • @buzzardtheboltcutters4420
    @buzzardtheboltcutters4420 5 ปีที่แล้ว

    Your a genius, don’t waste your life getting bogged in some rich mans shit and be happy or get out

  • @cjchun82
    @cjchun82 4 ปีที่แล้ว

    Is there any possible for Audi A6 C6?