Excuse me, but I have just purchased a C5 Audi Allroad and have like many others problems with the air suspension, could someone please explain the reson for this instalation kit and if it still ca be bought?
Hello, this kit allows you to increase the maximum ride height for the air suspension system by approximately 40mm. If you have problems with your air suspension, this isn't going to fix those problems. Start with VCDS to determine what fault codes are present and go from there. These kits are listed/available on ebay, here: www.ebay.com/itm/234371004598?mkevt=1&mkcid=16&mkrid=711-127632-2357-0
Hi, have You got some spacers for sale? The link is not longer available. Or can You send the dimensions/3d drawing when You dont produce spacers any more. Waiting for respond. Thanks
No, the level control module works the same at all levels and speeds. The only difference is that after installing the longer vertical links, all levels are higher than original settings.
Hey where are these kits available? How thick are the spacers? How do you push the arms down with out triggering auto level? 402 mod or level sensor uprights? I see the ipp arms too. I have the same size tires and ipp arms. I don’t think I can stop the rub with 402 mod alone. I also want to be able to ride bump stops. Love your work!! Don’t want to make these myself!
I have these listed on ebay. The spacers are 1" thick (25mm), adding approximately 1.75" of suspension droop. Installing these spacers on top of the struts does not change the suspension level, because the sensors are attached to the lower control arms, and that position does not change. These spacers allow you to increase the maximum suspension height (via 402 mod) without worrying about fully extending the struts. There's no additional strut travel, rather it's as if you've moved the strut 1.75" downwards. The 1" to 1.75" relation is thanks to the front suspension's motion ratio (0.7).
shred NW It's a bit unstable compared to the summer tires I used to have on 18 inch wheels. I definitely would not take highway on/off ramps at the speeds I am used to.
IPP yea I figure it would be that trade off for off road function.. Too bad because it looks sweet on the car. Do you think lowering some psi on street touring tires would help with ride quality on forest service rough roads?
@@sergionelsonsilva you can go in this position, or bad for the suspension, for example if the compressor is dead and not swinging? thick tires don't RUB against the arches ?
@@sergionelsonsilva of course a great thing you came up with brother , but why so expensive ?))))))) I ordered aluminum spacers on the ass in 40 mm, for $ 30, avto-prostavka.ru/shop/audi/prostavka-zadney-opory-stoyki-40-mm-dlya-audi/ , this thickness I need because I will put on the car springs in front of the Audi A8 D2, ass from A6 C5,quattro often breaks the suspension compressor, tired of fixing, time and money sorry ))) I want to ride, at not afraid that the car will fall on the belly
fantastic kit, I have been researching a long time and thought I might have to fabricate my own set. I am considering making spacers to lower the subframes too but am not yet sure if this is needed or will work. I'd like to order one of your sets please, how can I contact you? I've already just sent you a message via G+ you may get an email notification, thanks
So we make a video about a lift kit but do NOT show, how hight it goes?
Well...
Yes we needed before and after pictures.
Wow nice new air suspension and nice tires
A new world has opend up to me, thanks
Excuse me, but I have just purchased a C5 Audi Allroad and have like many others problems with the air suspension, could someone please explain the reson for this instalation kit and if it still ca be bought?
Hello, this kit allows you to increase the maximum ride height for the air suspension system by approximately 40mm.
If you have problems with your air suspension, this isn't going to fix those problems. Start with VCDS to determine what fault codes are present and go from there.
These kits are listed/available on ebay, here: www.ebay.com/itm/234371004598?mkevt=1&mkcid=16&mkrid=711-127632-2357-0
Hi! is it possible to install on an RS6 c7?
The front spacers yes. Rear spacers very different.
Hi, have You got some spacers for sale? The link is not longer available. Or can You send the dimensions/3d drawing when You dont produce spacers any more. Waiting for respond. Thanks
Hi, the spacer kits are still available on eBay.
@@biturboaudis4 thank you i found it. I order :)
@@biturboaudis4 can't find
Wo kann ich diesen Kit bestellen ?
Hello, congratulations for the work. I wanted to ask you if you have blocked the automatic level change
No, the level control module works the same at all levels and speeds. The only difference is that after installing the longer vertical links, all levels are higher than original settings.
cant find any on the internet where they gone?
They are listed on eBay. Www.ebay.com/itm/233703288345
@@biturboaudis4 Moze li pomoc imam problem??
What size tires can be fitted to a Q5 with a lift kit?
Sorry, but I have not played with the Q5. Can't provide any meaningful information.
@@biturboaudis4 thanks for the reply.
Hey where are these kits available? How thick are the spacers? How do you push the arms down with out triggering auto level? 402 mod or level sensor uprights? I see the ipp arms too. I have the same size tires and ipp arms. I don’t think I can stop the rub with 402 mod alone. I also want to be able to ride bump stops. Love your work!! Don’t want to make these myself!
I have these listed on ebay. The spacers are 1" thick (25mm), adding approximately 1.75" of suspension droop. Installing these spacers on top of the struts does not change the suspension level, because the sensors are attached to the lower control arms, and that position does not change. These spacers allow you to increase the maximum suspension height (via 402 mod) without worrying about fully extending the struts. There's no additional strut travel, rather it's as if you've moved the strut 1.75" downwards. The 1" to 1.75" relation is thanks to the front suspension's motion ratio (0.7).
The lift kit is compatible to a passat b5.5? I ask for front wheels. If it is, I need this.
@No Name i don't fund my model here. I need for passat b5.5 2000-2005
Hi, do you still have these? 😥
Yes. Still have them. Email me for more info.
Hi. Does this fit for audi a6 c6 4f allroad?
Sorry, these spacers do not fit the C6 allroad, only the C5 (2000-2005).
How does the car handle on the highway with the all terrain tires?
shred NW It's a bit unstable compared to the summer tires I used to have on 18 inch wheels. I definitely would not take highway on/off ramps at the speeds I am used to.
IPP yea I figure it would be that trade off for off road function.. Too bad because it looks sweet on the car. Do you think lowering some psi on street touring tires would help with ride quality on forest service rough roads?
shred NW Deflating the tires would definitely help with rough road manners. I haven't played with the pressures as of yet.
Hello, on the 6-minute video, at what level is the machine !?
At the 6:00 mark, the air springs are fully deflated. There is no air in the system and the car is resting on the bump stops.
@@sergionelsonsilva
you can go in this position, or bad for the suspension, for example if the compressor is dead and not swinging? thick tires don't RUB against the arches ?
@@V1tamin1486 Correct. These big tires will not rub the wheel arches even if the suspension fails completely.
@@sergionelsonsilva of course a great thing you came up with brother , but why so expensive ?))))))) I ordered aluminum spacers on the ass in 40 mm, for $ 30, avto-prostavka.ru/shop/audi/prostavka-zadney-opory-stoyki-40-mm-dlya-audi/ , this thickness I need because I will put on the car springs in front of the Audi A8 D2, ass from A6 C5,quattro often breaks the suspension compressor, tired of fixing, time and money sorry ))) I want to ride, at not afraid that the car will fall on the belly
hi , any more info on the kit please
Hi Will it fitt on VW passat B5+ 2004 2,5tdi 4motion?
I am wondering the same. They should, right? The suspension is the same, no?
The shock absorbers is diferent but suspention construction is verry similar I think? Or I wrong?
Size of rims and tires?
why can’t i find this kit for sale anywhere on the internet??????????!
Luke Blanchard I have not marketed these much. I have some kits and will advertise them soon. What's you email? I can send you more info.
IPP email me nickortiz46@gmail.com
30 mm is it possible to stick?
The IPP website has no information on this kit, how can we get this kit?
eBay, but I just sold the last kit I had. More in stock later this week.
Hi. Can you let me know how I buy a set please?
I will be listing these kits on eBay soon.
Presiso de lift kit para Audi a6 allroad de 2001 de 50 mm.possível?
will this kit fit on a b7 a4
The entire kit: no. The front spacers would fit but the rears would not, as the B7 is a completely different suspension system design.
let us know when you have more kits available.
They will be listed on eBay shortly.
Is this legal in germany?
Hi. Can you let me know how I buy a set please
David Hickman Email address? I'll send you more info
IPP david.hickman@tesco.net
Hi nothing has come through yet?
Hello, where i can get it? Looks pretty cool.
My Mail is d.sander.wf@gmail.com
Hi .from where i can Buy this stuf?
I made 5 kits but they've all been sold. I may consider making more if there's enough demand.
you should. i realy need one of this
Hello, looks cool, where can i get it?
where can i buy the spacer lift kit. thank you in advance
bowser123ism What's your email address? We have them in stock.
sam69er007@hotmail.com
please email me how to purchase the kit from you. Cheers
IPP email me I want some
IPP want to shoot me an email please? Zekedavies3@gmail.com
Hey IPP i need a kit ASAP do you have one available now?
Auggie P Yes, three kits available right now.
Definitely want one of the sets! Super happy I found you on here
Hi there IPP - are you still fabricating the kit?
Aussie buyer keen here!
Jeremy Brown Yes, I have a few kits ready to ship. Message me your email address and I'll send you some info.
@@biturboaudis4 no worries - jeremy@skynetbroadband.com.au
An easy and great kit! it looks like it can work for a normal A6 Quattro. How can i Purchase this, and how much does it cost?
and in the describe you say the kit is 25mm, but you can achieve 50mm increase. How?
struts connect halfway along the suspension leg, so lengthenning them with spacers has a multipying effect on the position of the leg end
Thanx for the video :)
fantastic kit, I have been researching a long time and thought I might have to fabricate my own set.
I am considering making spacers to lower the subframes too but am not yet sure if this is needed or will work.
I'd like to order one of your sets please, how can I contact you? I've already just sent you a message via G+ you may get an email notification, thanks
Sales@innovativeperformanceproducts.com
IPP need kit DM! Ty
Sell me a kit IPP!!! 👍
I want to purchase those! some one send me the link! :D thanks
Richard Parada what's your email address?
paradarichard94@gmail.com
That kind of tuning is not the best solution for suspesion and car stability.