FMS Toyota FJ40 RC Crawler review and test - Can this new 1/10 measure up?

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ส.ค. 2024
  • FMS FJ40 rc car 1/10 review test and pros and cons fj body modified rc rock crawler
    FMS Toyota FJ40 from FMS Hobby - www.fmshobby.c...
    FMS Toyota FJ40 from Amain - bit.ly/3YD2K9r
    ISDT EC70 esc - www.amazon.com...
    FMS FCX24 - www.fmshobby.c...

ความคิดเห็น • 152

  • @RCReviewChannel
    @RCReviewChannel  ปีที่แล้ว +1

    Buy here: FMS Toyota FJ40 - www.fmshobby.com/products/fms-1-10-toyota-land-cruiser-fj40-rs?ref=rcreview

  • @rcjono
    @rcjono ปีที่แล้ว +7

    The thing I really love about FMS is they make very good and affordable vehicles. They enable people particularly the budget conscious to get into the hobby. This is not perfect but the upgrades can be done later, which is actually the fun part of the hobby, with great support and a lot of hop up parts available from them or other aftermarket brands, this makes it possible for the rc community to grow. The scale features on this plus the licensed Toyota badge beat the RC4WD FJ40 by a mile. I am definitely getting one thank you FMS! ❤️

  • @andrewschoen9614
    @andrewschoen9614 ปีที่แล้ว +15

    While companies like Traxxas are trying to sue their way to profits, FMS is out there providing the community what they want.

  • @edwardcruz1083
    @edwardcruz1083 ปีที่แล้ว +5

    Those windows are just begging for those black rubber weather strips. Other than that, it looks absolutely awesome!

    • @jonlaird5082
      @jonlaird5082 ปีที่แล้ว +1

      I fully agree with you there. It also needs inner fenders up front in my opinion

  • @RCPlayGround
    @RCPlayGround ปีที่แล้ว +2

    I hope the release will continue in 1/10 scale.....

  • @geraldmaybebaby1585
    @geraldmaybebaby1585 ปีที่แล้ว +2

    I bought a hobbywing fusion pro. OMG! it's amazing.
    Maybe it was bad settings of stock trx4, but when braked on slope, it had a little neutral changing direction and would run away a little.
    But tested Pro on a measured 35 degree angle. And the brake, direction change is solid. The slow speed is fantastic.
    Not even used the tuning card yet.
    But a stunning upgrade. Totally in love with my crawler right now.

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Right on. That is a gem. I'll put one in this vehicle eventually.

  • @kopigangrc
    @kopigangrc ปีที่แล้ว +1

    Triple Sweet scale crawler.. I've heard they have a 1/10 upcoming and didn't realize they have a licensed FJ body. So cool. Thanks for the awesome review. 😊😊😊

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      Thank you very much. Yeah, this is a treat at an approachable price.

  • @jakethole
    @jakethole ปีที่แล้ว +1

    Ohhh man!! I love the licensed Toyota rigs we definitely need more! Thank you FMS and Great review!

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Much appreciated. I'm glad I took the time to push it.

  • @bacongl
    @bacongl ปีที่แล้ว +2

    Im a sucker for a good FJ. This thing looks killer. Going to have to grab one and see what I can do. Thanks for the heads up.

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Right on. Just get a decent ESC and damp those shocks and you'll be on your way to scale greatness.

  • @Dreiviertel
    @Dreiviertel ปีที่แล้ว +1

    Oh, this rig is right up my alley! I need one and I don't care if it is not exactly 1:10 scale.
    The Mashigan leaf spring kit seems to be a bolt on for this one, too.
    Great video also! 😊

    • @superdutyscaler6823
      @superdutyscaler6823 ปีที่แล้ว +1

      Yes the leaf spring kit bolts right on. My yellow fj40 and leaf spring kits are supposed to arrive this Wednesday. I CANT WAIT

  • @efeezhee4088
    @efeezhee4088 ปีที่แล้ว +2

    Wow this is an amazing review! Love how you decided to mod it right away and the mods you chose really made it perform well! Some Impressive crawling for it being so scale! FMS FTW!

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Thank you! Yes, I had limited time to film it so I had get it a decent esc to understand what the chassis could do.

  • @Randaddy
    @Randaddy ปีที่แล้ว

    It's about time we got a big boy JDM machine! After seeing what people have done with the Mashigan, this FJ going to be an awesome canvas.

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      You are so right that it shold be a canvas. They should put up a contest on what folks can do with it.

  • @dhcho4473
    @dhcho4473 ปีที่แล้ว

    I like and trust your wonderful reviews.
    Wow FMS is the jewel of the RC market. I already have Jeep YJ and Hilux from FMS.
    They are brands that make great cars and offer them at reasonable prices. Most of the motors, transmissions, and tires that you upgrade are not a problem.
    FMS!!! I'm rooting for you!!!

  • @nhansme
    @nhansme ปีที่แล้ว +2

    It’s a good looking trail truck for sure…Doesn’t look like much of a crawler though But not bad for what it is and for the price
    Thank you so much for the review…!!!

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      For sure it's a trail crawler. More for scale and our 1:1 dreams.

  • @mgscheue
    @mgscheue ปีที่แล้ว

    It's beautiful. And big. More like 1/7 scale based on actual vehicle dimensions. It did better on the rocks than I expected. Reasonably priced, too.

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Yeah, that drivetrain and steering definetly helps it. If I can just find 65mm supportive shocks, I'll be set.

  • @danielfiander5731
    @danielfiander5731 ปีที่แล้ว +1

    Nice truck, some old style treal wheels will look great on that 👍🏻

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      These ones? trealhobby.com/products/treal-metal-19-beadlock-wheel-rims-4pcs-vintage-design-wheel-hub-for-wagon-wheel-110-rc-crawler-type-g

    • @danielfiander5731
      @danielfiander5731 ปีที่แล้ว

      @@RCReviewChannel yeah but in black 👍🏻👍🏻👍🏻

  • @RCManiacs
    @RCManiacs ปีที่แล้ว +1

    That truck is gorgeous 😮

  • @rcgoodtimes6657
    @rcgoodtimes6657 ปีที่แล้ว +1

    That things a beaut and the silent drivetrain is great! I would probably delete that massive roof rack if possible

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      Yeah, I should try to remove that. And load it up too like my D1RC Defender.

  • @solorex2383
    @solorex2383 ปีที่แล้ว

    Stunning, and I love it's so big!
    Mine should show up in a few days. 😍

  • @andrewmagro7703
    @andrewmagro7703 ปีที่แล้ว

    Oh No Not another Beautiful Beast i must add to my collection , Thanks For a great and Honest reveiw also to FMS for listening to us as we all want the bigger scale 1/10 1/8 1/7 1/6 ill take any of these all day long and some of the old school 1980's Trucks,Jeep's and 4X4's bring it on FMS

  • @bcochener
    @bcochener ปีที่แล้ว

    Man that thing is sweet! They nailed the looks for sure!

  • @yiarkungfu
    @yiarkungfu ปีที่แล้ว

    Got mine today, the truck is amazing, it reminds me of Christmas morning when I was 10 and the yellow paint is perfect. Replaced the stock esc because it kept lurching forward. Put a Hobbywing 1080 in it, not sure if I should set the BEC to 6.0 volts to protect the lights and the steering wheel servo. Want to get more scale wheels and tires. Then pop some My Trick RC lights and light controller and I'm good to go, until I put a Hobbywing pro in it.

  • @Papa_Shorty
    @Papa_Shorty ปีที่แล้ว +1

    I just got mine today. Its my first 1/10 and I don’t have anything to compare it too. Apparently its bigger than 1/10.

  • @coconutrc7089
    @coconutrc7089 11 หลายเดือนก่อน

    Love this Rig. I believe it’s a 1/9 or 1:8. It’s as big as my slash

  • @ShadeTree_RC
    @ShadeTree_RC ปีที่แล้ว +2

    legend has it if you say candyman 3x fran's scale driver will show up 😁

  • @drehahaha
    @drehahaha ปีที่แล้ว

    I'm knit picking here but FMS got the color a reversed. I'm old enough to remember the iconic FJ color was the green (salted duck egg) with the white top. Second color would be the sahara yellow like the one in 1/6th Jimny. This golden yellow should be in that old Jimny, that's the original color of the actual old Jimny! Regardless, it's a beautiful truck - all FMS RCs are!

  • @erood6190
    @erood6190 ปีที่แล้ว +2

    Great looking car. Would have liked to see running footage with the original esc and shocks just for comparisan.

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      For sure. I'll shoot a little bit of that footage.

  • @Just_AnotherPlayer
    @Just_AnotherPlayer ปีที่แล้ว +5

    I’m in the market for a crawler and while this is absolutely beautiful and within my price range I think I’d be too scared of damaging that body to really drive it

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      Yeah, it's too showroom perfect. If it had a patina, beater paint job, it would be easier to drive and scratch.

    • @Just_AnotherPlayer
      @Just_AnotherPlayer ปีที่แล้ว +1

      @@RCReviewChannel maybe I could drive it for a while and then send it off to RC patina guy. But it also doesn’t seem to perform amazingly and I don’t really want to have to purchase upgrades right off the bat

    • @heavenisalie
      @heavenisalie ปีที่แล้ว +5

      @@Just_AnotherPlayer that's always the thing with hard body crawlers, never as good performance but good enough for trails and true scale driving

    • @eder8583
      @eder8583 ปีที่แล้ว

      Se procura por desempenho não vai ser com um corpo rígido! Compre algo como Traxxas Sport ou Axial base camp.... Carros com riqueza em detalhes são para quem realmente gosta de conduzir com dificuldade...

  • @chaddavis513
    @chaddavis513 ปีที่แล้ว +1

    Very nice and great detail!👍

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      Yeah, best of this family from FMS, Rochobby.

  • @mypassionrc-studioxd40lous66
    @mypassionrc-studioxd40lous66 11 หลายเดือนก่อน +1

    Love it, going to be my next crawler, and it doesn't break the bank, plenty of money left over to make modifications. Unlike the big 3 were you spend 600-700 bucks and still have to modify the darn truck. Keep knocking it out of the park FMS 🙏✝️☮️🏜️ big fan

  • @jonlaird5082
    @jonlaird5082 ปีที่แล้ว

    Very cool as I'm planning on getting 1 in the future. I'm definitely loving the yellow color. But I'm gonna wait until fms releases a few upgrades like the leaf springs,lol

  • @collector7993
    @collector7993 ปีที่แล้ว

    Nice video mate, much appreciated. Can't wait to get them in Australia.

  • @boldrbangr9834
    @boldrbangr9834 ปีที่แล้ว

    Great job! Ordered mine yesterday 😄

  • @290DIRT
    @290DIRT ปีที่แล้ว

    Good job FMS, pretty scale with good performance too!

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Yeah, the Mashigan didn't quite do it for me. This one nails it.

  • @texomarc
    @texomarc ปีที่แล้ว

    Super cool rig. Great breakdown.

  • @axellness
    @axellness ปีที่แล้ว +2

    This is a steal for $350.

  • @gregorygene9003
    @gregorygene9003 11 หลายเดือนก่อน +1

    RC4WD FJ40 also looks big, I wonder how they both compare in size.

  • @ChasingplasticCars
    @ChasingplasticCars ปีที่แล้ว +2

    Love it, just wish it was actually 1/10 scale.
    Another great review/video 👍

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      thank you. Yeah, the size of it will stop some folks from buying. You get more for your money though. lolol

  • @milesritter1410
    @milesritter1410 10 หลายเดือนก่อน

    I think I'll have to get one. I just wish it came in the same green as their FJ45, Then it would be a close match to my 1:1.

  • @MultiSkyman1
    @MultiSkyman1 ปีที่แล้ว

    What a beauty!

  • @tigerone2353
    @tigerone2353 11 หลายเดือนก่อน

    Beautiful truck

  • @ballsteinyts
    @ballsteinyts 11 หลายเดือนก่อน

    The ESC it comes with is terrible I thought something was broken. The sudden stop and go with those soft shocks is crazy.

  • @eddytoy9496
    @eddytoy9496 ปีที่แล้ว

    Put some Vanquish aluminum F10t axles under that thing, a Fusion Pro, some decent shoes on it and it would be absolutely awesome!

  • @Fourwheeljive
    @Fourwheeljive ปีที่แล้ว

    Nice FJ! Needs the spare tire to look right!

  • @NANNIRC
    @NANNIRC ปีที่แล้ว

    very nice scaler, yes the body falls out from the chassis dampers too little may be. Ciao e Bravo! Nanni

  • @rquino4210k
    @rquino4210k ปีที่แล้ว

    That thing is massive!!!

  • @jimbonito9810
    @jimbonito9810 ปีที่แล้ว

    Very Nice Hard to resist I like it .... Nice review also

  • @thomassanio8745
    @thomassanio8745 10 หลายเดือนก่อน

    Great review. Does the top and doors come off on this FJ40 model? Also where did you find the steelie wheels? Also can you run a 1.7 tire on those rims instead of the 1.9? Thanks. Tom

  • @trevorcourt1403
    @trevorcourt1403 ปีที่แล้ว

    I think it’s fantastic

  • @OkieDokieBoi
    @OkieDokieBoi ปีที่แล้ว

    It would be great to see this next to a Machigan, haven't seen that yet. I'm curious as to if they are the identical chassis. . .

  • @seanmellows1348
    @seanmellows1348 ปีที่แล้ว

    Really nice.

  • @meticulous_rc
    @meticulous_rc ปีที่แล้ว

    Wow!!! What an amazing deal!! I need one of these now. I can’t believe you can get all this for that price. Functional hood, doors, rear door and seats fold up??!! Is this only available through fms currently?

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      Yeah, considering the Hummer H1 is about the same price, this thing is a lot more worthy of our dollar.

  • @bradkalman2353
    @bradkalman2353 ปีที่แล้ว

    I would like to see you review the Tamiya mb01:and the bbx from them.

  • @sammygonzalez7627
    @sammygonzalez7627 9 หลายเดือนก่อน

    Francis you did not read the sign to see how low the bridge was 😂

  • @AgeOrmstad
    @AgeOrmstad ปีที่แล้ว

    Super cool 👌😋

  • @yiarkungfu
    @yiarkungfu ปีที่แล้ว +1

    I want that!!!

  • @kellyhartle3251
    @kellyhartle3251 ปีที่แล้ว

    Take my money, used your link. Thank you

  • @ucitymetalhead
    @ucitymetalhead ปีที่แล้ว

    I do wish they would get the scale straight cause this would have been awesome for my 6 inch figures.

  • @krasic
    @krasic ปีที่แล้ว

    I am looking for something to mount a Lexan FJ60 body onto. This has potential.

  • @rockymtntown
    @rockymtntown 9 หลายเดือนก่อน

    The nice thing about traxxas is you can easily figure out a battery and charger on their website..I went to buy one of these FMS Toyotas and there is no battery or charger that’s sold…

  • @KickyTop
    @KickyTop ปีที่แล้ว

    nice looks for RC Scale. 👍👍👍😋

  • @eder8583
    @eder8583 ปีที่แล้ว

    @RCReviewChannel obrigado pela revisão... Seria interessante um comparativo primeiramente original e depois como fez.. embora é de praste que pilotos experientes já alterem o carro de imediato com pneus, amortecedores e eletrônica melhores - fato!! Ao meu ver faltou leds no para-choque traseiro (posso não ter percebido..) e o rack de teto é um item que prejudica o visual do carro.. infelizmente em uma das imagens, a camera mostrando o teto por dentro denuncia muitos parafusos fixando o rack.. isso é grotesco, pois ao remover o rack ficara muitos buracos no teto :( ... Mas nada é perfeito e acredito que o valor é incrível pelo que entregam.. o detalhe da escala nao parece grave🙌

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      "It would be interesting a comparative firstly original and then, immediately, with better tires, shock absorbers, and electronics! I see the LEDs missing from the rear bumper (I can't see it...), and the roof rack is an item that harms the visuals of the car... unfortunately in one of the images, the camera shows the roof inside. The rack... is so grotesque. You can remove the rack by many holes in the chest :(... But nothing is perfect, and I believe that the value is incredible🙌"
      Great comment. I'll definitely remove the rack and see how it looks and performs. I'll make a video on it.
      Thank you for your comment @eder8583

  • @sammygonzalez7627
    @sammygonzalez7627 10 หลายเดือนก่อน

    Between the fMS fj40 redcat gen9 and redcat Montecarlo i'm really thinking bout them

  • @pborovszky
    @pborovszky 2 หลายเดือนก่อน

    After I calculated, I think the scale ratio is more like 1:8

  • @jerryvolpini7987
    @jerryvolpini7987 ปีที่แล้ว

    Tenth-scale my a$$, lol! Great looking rig, amazing attention to detail. That body roll though, excessive, even for a scale rig. You know that song, "Wiggle it, just a little bit", this aint it! 😂 Thanks for the review! 👍

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      For sure. A little wiggle is good but it shouldn't see-saw.

    • @mikegin7818
      @mikegin7818 10 หลายเดือนก่อน

      You guys have never driven a real FJ40. I own a '74 and major body roll is standard lol.@@RCReviewChannel

  • @stefan-norge
    @stefan-norge ปีที่แล้ว

    Soooo nice 🎉

  • @ottokueng4236
    @ottokueng4236 11 หลายเดือนก่อน

    What about the gear and Differential? 2 Speeds and locking Diff?

  • @stevenfulton4935
    @stevenfulton4935 11 หลายเดือนก่อน

    Can you add a link where you bought the wheels and tires, I would really appreciate it

  • @me-rn7jx
    @me-rn7jx ปีที่แล้ว

    wow i may have to purchace from fms and put as many axial parts underneath it

  • @norsefalconer
    @norsefalconer ปีที่แล้ว

    Sweet! Could use a sound card.

  • @TrokaRC
    @TrokaRC ปีที่แล้ว

    👍

  • @MultiReefa
    @MultiReefa ปีที่แล้ว +1

    Me looking at my RC4WD land cruiser fj40 I got robbed didn't I lol

  • @rcaxialscx10
    @rcaxialscx10 ปีที่แล้ว

    very nice will the body fit scx10 ii or 3 ? also can you buy the body by itself

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      The wheelbase is 13.3 inches so it needs that from the chassis. In most cases, it won't fit Axial or Traxxas chassis because nothing can be on the driver cabin area. All that space needs to be empty with the motor and electronics out of the way.

  • @davo1661
    @davo1661 ปีที่แล้ว

    The widows roll down.

  • @haroldsbeaver206
    @haroldsbeaver206 9 หลายเดือนก่อน

    I was trying to remove the roof rack and just can't find the right Allen driver to take it off. 1.5mm seems loose, 2mm is to big, and tried 1/16th. I hate asking this, but wonder if anyone else has had this problem. Thanks

  • @marinhoalbanij.8224
    @marinhoalbanij.8224 7 หลายเดือนก่อน

    What is the recommended battery pack for this model? I bought one but battery was not delivered. Is that it?

  • @tigerone2353
    @tigerone2353 11 หลายเดือนก่อน

    But is it equipped with full locker diff or differential?????

  • @mikeupton5406
    @mikeupton5406 ปีที่แล้ว

    The FJ experts can correct me on this but the only thing missing from the outside appearance is manual front hub locks. I seem to remember alot of these having that feature. Very similar to the Ford front hub locks from that era. Edward Cruz mentioned black rubber window gaskets and this thing is perfect. Needs a half finished glass bottle of RC cola, a bag from Fosters Freeze on Dey La Vina street on the passenger seat and a Powell Peralta skateboard in the back.
    Someone knows what/where I'm talking about.😉
    Also again thank you for a great review.

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +1

      You're right on the mark there with the lockers. Thank you.

  • @azahar_born_in-1970
    @azahar_born_in-1970 6 หลายเดือนก่อน

    May i know..the car body is made up with plastic, fibre or steel? Or same as traxxas

  • @hollyhillrc
    @hollyhillrc ปีที่แล้ว

    Hi. Could you tell me what size driver you have in this please. 7 or 8 inch? Thank you very much 🙂

  • @emeeul
    @emeeul 11 หลายเดือนก่อน

    Anybody know if you mod the grille to the square style? I have a full-size BJ42 (right hand drive) in Mustard yellow and I want to use this rig as a base for a tiny version.

  • @camann33
    @camann33 11 หลายเดือนก่อน

    Think it could be painted without too much difficulty?

  • @chalinp4886
    @chalinp4886 ปีที่แล้ว

    How does it compare in size to the fms jeep Willy’s

  • @derroter87
    @derroter87 ปีที่แล้ว

    I really want to order one of those, is the driver on yours 1/6 scale?

  • @JvD1985
    @JvD1985 8 หลายเดือนก่อน

    Do you think 2.2 tires will fit this truck?

  • @bud1lite
    @bud1lite ปีที่แล้ว

    So definitely a pure trail vehicle,about how much does it weigh?

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Trail crawler for sure but performance can be improved quite a bit still. It weighs 9.5 lbs.

  • @quintonwilliams4730
    @quintonwilliams4730 ปีที่แล้ว

    What's up with the front Toyota logo flashing? Is that just your camera missing it with the lighting or is it actually a light that is cutting in and out

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      That's just the studio lights as I turn the vehicle. I think...

  • @WismayaRC88
    @WismayaRC88 9 หลายเดือนก่อน

    Andai axial juga memilih RC hard body 😢

  • @xm3ntal620
    @xm3ntal620 ปีที่แล้ว

    Can someone link some black steelies for this thing? Thanks.

  • @Toyotabj40
    @Toyotabj40 ปีที่แล้ว

    Excuse me, what kind of battery does it use?

  • @MrElectro9292
    @MrElectro9292 6 หลายเดือนก่อน

    hi, how to set up drag brake?

  • @perryellisonjr9303
    @perryellisonjr9303 7 หลายเดือนก่อน

    What battery do you recommend?????

  • @pbciocon
    @pbciocon 9 หลายเดือนก่อน

    🤔🤔🤔this one or the rgt ex86190?

  • @beastcf9904
    @beastcf9904 ปีที่แล้ว

    What size battery did you go with?

  • @alulatadesse1646
    @alulatadesse1646 4 หลายเดือนก่อน

    It looks 1:8 not 1:10 awesome suv

  • @MechAnism820
    @MechAnism820 ปีที่แล้ว

    Nice detail, but its way too big. The shocks are really bouncy and the springs too soft making it sway a lot. It doesnt move properly, ruining the scale look as soon as you drive it.

    • @buysncharge
      @buysncharge ปีที่แล้ว

      Yeah. You'd be out tens of dollars to fix it.

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว +2

      Yeah, I can fix that easy. The D1RC Defender that I have nailed it. Just need some heavy damping.and it will look darn good.

  • @ralphweggum1134
    @ralphweggum1134 ปีที่แล้ว +1

    Its not 1/10. More like 1/6

  • @Proscalecrawler
    @Proscalecrawler ปีที่แล้ว

    1st🎉

  • @Johnn_T
    @Johnn_T ปีที่แล้ว

    @RCReviewChannel the ONLY reason they call it 1:10 scale is cause so many in the US complained when FMS put the TRUE scale of 1:6 on the box of the MB Scaler, and the LC10 Jimny. "Its not 1:6 scale its 1:10 scale" echoed out of the US community like you would not believe, SO when the Mashigan came out they put 1:10 on the box.........NOBODY COMPLAINED ANYMORE!!!

    • @RCReviewChannel
      @RCReviewChannel  ปีที่แล้ว

      Decent point but I’ll have to disagree there.

  • @safitz7863
    @safitz7863 10 หลายเดือนก่อน

    @RCReviewChannel I am curious if you have the brand of the figure you used, or images of it.
    One sixth is my primary hobby, RC is secondary. I purchased the Jimny thanks to your reviews. I was looking at the Mashigan, but I'm more intrigued by this FJ40 now.
    But I need to know what kind of figure it can house and if the figure has to be amputated first.

    • @RCReviewChannel
      @RCReviewChannel  10 หลายเดือนก่อน +1

      That is a G.I. Joe 12-inch action figure. Had to take the feet and boots out.