Soundigital 5k initial thermal testing

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ส.ค. 2024
  • So I had a different SounDigital 5K that I bought from ebay and ended up returning it due to excessive thermals. Today I wanted to bench test the extended idle temps before taking the time to install it.

ความคิดเห็น • 15

  • @B15SDMDESIGNS
    @B15SDMDESIGNS ปีที่แล้ว

    I have the same amplifier. How do you open this one up to see the guts?

  • @Emperor_1971
    @Emperor_1971 ปีที่แล้ว

    My cousin have that amp any idea why it’s not turning off even tho we pull out the remote wire ? Also what version is the 2ohm n 1ohm ours is evox-2 and was told it’s the 1ohm ?

    • @RodofAllTrades
      @RodofAllTrades  ปีที่แล้ว +1

      Something has failed.

    • @Emperor_1971
      @Emperor_1971 ปีที่แล้ว

      @@RodofAllTrades ok so what’s the 2nd question?

    • @RodofAllTrades
      @RodofAllTrades  ปีที่แล้ว +1

      @@Emperor_1971 Evo 2X 2 ohm.

    • @Emperor_1971
      @Emperor_1971 ปีที่แล้ว

      @@RodofAllTrades thanks for the replies we had subs wired to 1ohm subs check with multimeter at 1ohm then hook up to the amp n check there it also read around 1ohm too shouldn’t it read higher for the 2ohm version amp ?

  • @roelvisgrullon8696
    @roelvisgrullon8696 ปีที่แล้ว +2

    Lemme let you know that you know nothing about modern amps. This is an audio driven fan. This is the weirdest test i've ever seen. This man is trynna make an analysis just by turning on an amp with no speakers on

    • @RodofAllTrades
      @RodofAllTrades  ปีที่แล้ว

      The reason I was doing this is because the last amp I had like this one would get burning hot not even playing music. I would just have it remotely turned on. I was trying to see if this is just something these Brazilian full bridge amps do. I had a SounDigital 3K that worked perfectly. It would only heat up when driven hard, but at idle, it would be barely luke warm.

    • @RodofAllTrades
      @RodofAllTrades  ปีที่แล้ว

      Also, if the fan is "audio driven" why did it eventually turn on without the amplifier receiving a music signal, or having any speakers connected?

    • @roelvisgrullon8696
      @roelvisgrullon8696 ปีที่แล้ว

      @@RodofAllTrades most of brazilian amps are half- bridged. Remember this fan is simultaneously driven by temperature degree too...i've been using brazilian and chenese powerful amps for years, and trust if your amp turns hot without load, it probably has some biasing or switching issue.

    • @roelvisgrullon8696
      @roelvisgrullon8696 ปีที่แล้ว

      @@RodofAllTrades sometimes it randomly does for a second

    • @RodofAllTrades
      @RodofAllTrades  ปีที่แล้ว

      @@roelvisgrullon8696 I am not an amplifier circuit expert, however - I do my homework. I do know that TWO FULL BRIDGE amps CANNOT BE STRAPPED together. The amp in my video is a FULL BRIDGE design and it says in the owner's manual that it can't be strapped with a second identical amp. Here is a video link of a VERY knowledgeable guy. You may want to check it out. th-cam.com/video/b6tyjXSHvGg/w-d-xo.html

  • @porterdawgg1
    @porterdawgg1 ปีที่แล้ว +1

    Hope this isn't the amp I'm buying