I will be attempting this, I purchased Evercoat Easy Sand FIB-421 What do you think of it, and will this do. Can it be used over bare metal? Primed over? Specs say: Evercoat Easy Sand is a two-part flowable polyester finishing and blending putty that contains Hattonite for optimum sanding performance, and ZNX-7 for superior adhesion to galvanized metal, aluminum, and steel. This glazing putty is ideally suited for filling and skim coating body work, pinholes, grind marks, low spots, and other surface imperfections.
I will check out the upol high build . Cheapest is the $15 harbor freight gun. I haven't done a review because there's so many videos on it. If you can budget 100 you can get some that will last and perform relly well. Check out the asto evot13 ,astro euro pro or the Eastwood lt100. I have video reviews on the channel.
Hi, What caulk does not run after it dries??? For the past few years every caulk that I use that's supposed to be so good on the outside of my windows on my van, runs, on the windows and down the sides of the van when it gets wet.. from rain or Misty fog like we just had.. and I caulked them 6 months ago.. Is there such a caulk like that???
When you prime an area and sand . Do you want to create a valley in order for the primer and basecoat to level the surrounding area? Or do you just want to get the primer? I’m going to be trying a spot repair this week. I’m wondering if I should create a valley or just level the primer and hope that the base and clear won’t create a high area. I would appreciate your help. Thank you 🤘🏼
If I listened correctly you had epoxy primed/sealed the car. And you now are coating it with filler. Without adding a tooth to the existing epoxy your adhesion of filler would really be iffy. I’ve always heard that epoxy after setting up over a day or two needs to be sanded before applying either primer or filler. Is that correct or incorrect. Thanks
Thanks every time I watch one of your videos I’m always learning something new…
That's great! Thanks for the support!
Great video.
Thanks!
Thank you for the video garage noise
Your welcome brother! Thank's for supporting the channel!
Wow amazing timing 😂
Great video... I would just stay away from taped off edges when priming as it leaves hard edge even if the masking tape is rolled as soft edge.
Your videos are great...
Thank's brother!
thanks for the great video, I look forward to them
Awesome repair mate I really enjoyed that video you make it look so easy lol 😂 much love and keep up the good work buddy 👍👍👌💯💯
Thank's for the comment, and supporting the channel!
That was very good
Appreciate it! Thank's for supporting the channel!
Very good video...
Nice job !! Keep the videos coming 🥳
Thank's for the comment!
Awesome work 👏
Thank's for the support!
I will be attempting this, I purchased Evercoat Easy Sand FIB-421
What do you think of it, and will this do.
Can it be used over bare metal? Primed over?
Specs say:
Evercoat Easy Sand is a two-part flowable polyester finishing and blending putty that contains Hattonite for optimum sanding performance, and ZNX-7 for superior adhesion to galvanized metal, aluminum, and steel. This glazing putty is ideally suited for filling and skim coating body work, pinholes, grind marks, low spots, and other surface imperfections.
Evercoat makes great products . It can be used over bare metal from the specs you sent. It should work great.
Putty is for skim coating and dosen't fill deeper dents as well but sands easy and is smooth when applied. It's easy to work with
You are using different body filled and primer??
Yes, I change it up often to get familiar with products. This way I can truly share my experiences. Appreciate the comment and support!
How bout upol high built primer..4.1.what cheapest paint gun I can used....that will do the job
I will check out the upol high build . Cheapest is the $15 harbor freight gun. I haven't done a review because there's so many videos on it. If you can budget 100 you can get some that will last and perform relly well. Check out the asto evot13 ,astro euro pro or the Eastwood lt100. I have video reviews on the channel.
Hi, What caulk does not run after it dries??? For the past few years every caulk that I use that's supposed to be so good on the outside of my windows on my van, runs, on the windows and down the sides of the van when it gets wet.. from rain or Misty fog like we just had.. and I caulked them 6 months ago..
Is there such a caulk like that???
I don't use the window caulk to much, I don't have a recommendation for you.
Who makes that sander you were
Using to take off
That paint ?
That's astro as well
amzn.to/3Re6ESi
@Garage Noise quick question, where do you get those cool lid/pour devices so you can control your pour out of those full size paint cans? 🤔🤔
Local paint supplier. Amazon link
amzn.to/3yGIwz8
When you prime an area and sand . Do you want to create a valley in order for the primer and basecoat to level the surrounding area? Or do you just want to get the primer? I’m going to be trying a spot repair this week. I’m wondering if I should create a valley or just level the primer and hope that the base and clear won’t create a high area.
I would appreciate your help. Thank you 🤘🏼
Short answer, level the primer you don't want to create a valley. Appreciate the support hope this helps !
@@GarageNoise that’s honestly enough for me! Thank you!
Little belt sander name ?
Astro here's my affiliate link. amzn.to/3nBptkH
Thank's for the support!
If I listened correctly you had epoxy primed/sealed the car. And you now are coating it with filler. Without adding a tooth to the existing epoxy your adhesion of filler would really be iffy. I’ve always heard that epoxy after setting up over a day or two needs to be sanded before applying either primer or filler. Is that correct or incorrect. Thanks
I applied filler over metal , no epoxy primer. Then applied 2 coats of urethane 2k primer.
I would washprimer those bare metal spots before spraying 2k highbuild. 🤷♂️