Good video. I was able to fix mine following your guide. I think next time I’ll add fuel stabilizer to the gas to keep it from gumming up in the carburetor.
Good video. What do you think about a carb that the fuel dried out causing a shellac problem. Would soaking a few day in cleaner or using s9mething else to get it off or just getting another carb or power washer?
When I took the lock bolt on the governor. I didn't check if the pin was open clockwise or open counter clockwise😮. How do I know if I locked it in the correct setting
I'm thinking about converting to hydrogen at least the first firings would clean it out.. could I use a match to the hydrogen or gasoline to burnt it out?
Just inherited a basket case karcher with a Rato RV173 motor... It came with a new carb, so installed it set choke and it fired first pull, given it had sat for years.. not bad I thought, then I shut off choke. stalled immediately 😢, won't run without full choke.. New carb adjustment? But can't find anything on the carbs for rato.. also I'm not familiar with those carbs or small engine carbs, been many decades since I tinkered.. what is the machined channel on the engine side face of carb, sort of spiral and open down at lower end of carb.. was told that they are redundant, but why would the take time to machine it into the piece.... ?
Didn't work for me. Already changed spark plug. 2 oil changes. Maybe the wire connected to spark plug? Or it's just done for. Bought mine in 2017. It's a 2200 psi Power Stroke 150CC
What stops the throttle from being wide open all the time I cleaned my carby but now when I let the choke off the throttle is wide open reving it's guts out
Dude, I just saved a few hundred dollars, I was on my way to home depot to get a new pw while watching this video.
Thank you.
I'm glad to help
Yes I charge $175
Thanks for the video. I was able to
Fix my power washer and saved the cost of a new one. Clogged Jet ports
Awesome! Thanks to your video, I got my pressure washer up and running!!!
Almost Identical to my Yamakoyo power washer thanks for making the video I wanted to see what I was up against well done 🙏
@powerwasher2106 oh I did brother for sure 👍
You just brought my pressure washer back to life. Started on second pull after cleaning carb. Awesome Video!
Subscribe
Awesome video straight to the point . PERFECT
Good video. I was able to fix mine following your guide. I think next time I’ll add fuel stabilizer to the gas to keep it from gumming up in the carburetor.
thank you my pressure machine works now after cleaning
Great video man! I'm gonna try it. Never fixed one before but let's try again!
Damn man the thing started 1st after I did this no problem thanks man.
Super helpful video. Should save me a few bucks
Fixed my pressure washer. Thanks
Real good video. Liked it better while you were talking.
You said if it takes an hour let it take an hour, ima take my time
Thanks man!
Thank you brother
Good video. What do you think about a carb that the fuel dried out causing a shellac problem. Would soaking a few day in cleaner or using s9mething else to get it off or just getting another carb or power washer?
Yes soak it in carb cleaner you just be able to disassemble it easy
Looks like my float is sticking even after cleaning. Will run then starts leaking gas out. New float?
I have same machine do you know why it bogs down on full throttle
👌🏽
When I took the lock bolt on the governor. I didn't check if the pin was open clockwise or open counter clockwise😮. How do I know if I locked it in the correct setting
I'm thinking about converting to hydrogen at least the first firings would clean it out.. could I use a match to the hydrogen or gasoline to burnt it out?
Wonderful! Thanks
Just inherited a basket case karcher with a Rato RV173 motor... It came with a new carb, so installed it set choke and it fired first pull, given it had sat for years.. not bad I thought, then I shut off choke. stalled immediately 😢, won't run without full choke..
New carb adjustment? But can't find anything on the carbs for rato.. also I'm not familiar with those carbs or small engine carbs, been many decades since I tinkered.. what is the machined channel on the engine side face of carb, sort of spiral and open down at lower end of carb.. was told that they are redundant, but why would the take time to machine it into the piece.... ?
I took the last pipe/ line out n then gas just spilt everywhere and wouldn't stop any help ?
Didn't work for me. Already changed spark plug. 2 oil changes. Maybe the wire connected to spark plug? Or it's just done for. Bought mine in 2017. It's a 2200 psi Power Stroke 150CC
Can we just soak in the cleaner then poke the holes?
You can yes , when the fuel dries its easier with the pics ,
What stops the throttle from being wide open all the time I cleaned my carby but now when I let the choke off the throttle is wide open reving it's guts out
@@glenandrew6914 check the linkage also the governor might be bad
I can’t find the other videos where are they?
Look at my videos on profile
Joke