ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2023
- My take on M111 swap wiring. I always prepare my harnesses like this. Harness in the video is from 1999. W208 CLK 230kompressor.
In the end it all comes to: just connect + and -, all other connections are factory...
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
You’re a top bloke going out your way to help Lee Lockwoods 190e. You’re a very talented man
Awesome work on Lee Lockwood’s 190e, you have a new follower 👍
This is the most helpful video on TH-cam, you Sir are a legend thanks heaps
Glad it helped
Awesome work Man! I am just about to start my project with swapping an m111 from w203 to my w201. Thanks for every video and for sharing knowledge. I Hope for a new video soon!
glad to help, w203 has a newer ecu but the gist is the same, feel free to contact me if you need anything(also, watch out for the front oil sump setup)
I did understand this is your second project 😂 well done you gove us a precious information to how we can so it easily 👏 😀 🙌 😊 ❤️
this was 2nd car I tore apart for my own projects, did a few before
Amazing help! Thanks for taking the time to record this for people who are not to deep in this topic. With this video, nearly every mechanic should be able to run this engine in any car:-)
Do you have any experience with the M111 say the 220E from the W124 for example? Is the wiring similar?
Thinking about another W201 with the none boosted engine for my wife🤣
Thank you for the kind words!
w124 220e had older ecu(referred to as HFM ecu) and other stuff also. The gist is pretty much the same, but it has different pinout since it only has 2 connectors.
I would like to ask you: Can I install a 6 gearbox M111 on an M102 2.3 engine?
yes, but you need different flywheel since 6speed from m111 has shorter input shaft(if your m102 gearbox already has a short input shaft, like on the diesel with dual-mass flywheel, it will bolt on)
keep in mind that the driveshaft is different
Great Work! very valuable. Is the wiring the same for a motor with automatic transmission? Do you have a pinout from the ECU with only the necesarry wiring? I started as well.. Big Thanks.
Thank you for the kind words, this was a manual car, automatic is the same
Did everything as you described, kept the metal ignitiom box to be sure. But when i turn the K40 on (ignitiom on) i only hear a buzzing sound from the electronic throttlebody. When i put 12v on the purple (starter) wire the 038 relay is keeps clicking, but nothing else happens. Do you have an idea what my problem could be?
contact me on facebook, there is a link on my channel info
The question is : how did you know that sis yiu ask some one teache you tgise or you read a manual on foeoum ...thank you thank yoi a lote please jus give us the reffencw of thia knowledge ❤❤❤
A lot of research, mostly trial and error
@@pittstop4310 tenes esta misma instalación eléctrica en ventas
Спасибо за полезное видео. Не ли схемы в виде рисунка?
I would like to know which plug did you connect the two green wires to? thank you for your help
if you mean CAN wires, from the ignition box to the D connector on the ecu (match same color wires)
Nice Video!!! Which cable is the speedometer connected to?
I have w126 electronic speedo driven by Dakota Digital SGI100BT unit via rear diff abs sensor
Is there going to be another video, dang. I forgot to pull the ignition switch when I had my donor car. Pulled the harness and ECU, but not the switch
There will be more videos, just not sure when
you might be able to get "immo off" done to your ecu despite the missing switch, or get another switch and key programmed to the ecu
I would suggest immo off emulator(removing the immobilisation) if it is cheaper - that eliminates some problems
@@pittstop4310 cool cool yeah, I will most likely do immo off since it's easier
How can I contact you? do you make it to order? I'm going to do a swap on my 190e to M111. this will help me? Thank you!!!
I have a link to my Facebook profile in the channel info, feel free to contact me there 👌
Can this be used with an engine that have electronic speed?
yes, if you connect it like this, it becomes something like a standalone harness meaning you can put it in anything really...
Hi do you do a costume wires for engine m111 going to 190e 1993
not right now, I thought about it, maybe in the future
Hi! Big thanks for makeing this video, but i run in to a problem... I connected all the wires like you showed, everything seems to be okey, but my ignition key just dont turn. Like something is mising... where do i need to search for problem?
contact me on facebook, there is a link on my channel info