RedCat Racing has a 3 channel with mixing that allows for front only, rear only, crab crawl, and standard 4 wheel steer. Even has a little LCD model that shows what mode you are in. Lansu 3TD is the model. $71.49 with the receiver. I have one with my old Sumo Crawler. Nice radio.
Radiolink transmitter has options for channel blending and also limiting how much the rear steer will move tires etc great radio tons of options and inexpensive for the features it has
Those locked diffs are only happy on dirt when it comes to the clod it works great only in the rear.. def thinking on getting another clod to make brushless but thought it would’ve been way faster.
I use a dumboRC controller. I wired in a self-centering 3-position switch that controls the rear steer like a dream! I wired it into the 3rd channel. I can give you more details if needed.
you might want to look at one the spektrum radio systems. I own the spektrum dx5c and its a good remote. also the switches are sideways then on the up or down buttons. Futaba are also good radios too. I hope this helps! ;)
First!! still watching. you should check ..can't you use a program card and just reverse one motors rotation? I think the radiolink radios can do the 4 steer look into it and find out for sure.
Depending on your budget i would suggest castle creations mamba x or copper head. Personally i love the mamba x mostly because i like trying to get the most out of the setup, plus it is highly tunable with the castle link
I have a quick question. I wanna do a brushless setup on mine. Just wanna make sure I have this info right. So I need two esc/motor combos and I set one up to go forward and the other esc/combo I set to go reverse. Now my question part. If I'm going sensored castle I just go into the esc setting and choose reverse for motor direction. Where if I go non sensored I just have to switch the wires to make the motor go in reverse. love your videos by the way I just recently found this channel.
Futaba all the way for a radio. They are higher quality and feel better than other radios I’ve used. They also have a fast response time. The receivers can be expensive, and a good transmitter is pricey, too. I use a 3pv for my Clodbuster, and it has rear steer mixing. You’ll want a 4pm if you want to use a button to switch between no rear steer, crabwalk, or normal rear steering because the 3pv can’t seem to do that for some reason. You’ll also want a 4 channel receiver because on the 3pv, the third channel can only be used for throttle mixing or the switch and the fourth channel is for steering mixing, not sure on the more expensive radios.
Pretty much the only original parts are the wheels, tires, bumpers and diff cases. The axle tubes are aluminum I just painted them black so they look stock
I just read when using the tamiya sensored esc that you can switch wires from ABC on the motor to connect to CAB on the esc to reverse the motor direction but timing should be set to zero.....
I'm new here I wanted to know if you sell the servo mounts I can't find them on the Internet I think you said you're custom made Em I would like to know if I could get a pair how much
Just seeing those rear wheels steer brings me right back to the best days of my childhood… I love it!
Long live the mighty Clod! Awesome truck brother,
I love how you have a Rea Clod buster right behind you in the 🎥 👍
Hey clod
Another cool video
Monster truck is really coming along
Clod buster is awesome
Great job on both
Awesome man, Clod long live!
RedCat Racing has a 3 channel with mixing that allows for front only, rear only, crab crawl, and standard 4 wheel steer. Even has a little LCD model that shows what mode you are in. Lansu 3TD is the model. $71.49 with the receiver. I have one with my old Sumo Crawler. Nice radio.
Awesome stuff!! Great video man, just found your channel.
Thanks for watching
Bro has the real life clod buster too congrats man damn
Radiolink transmitter has options for channel blending and also limiting how much the rear steer will move tires etc great radio tons of options and inexpensive for the features it has
Thanks for the tip I'll check it out
Those locked diffs are only happy on dirt when it comes to the clod it works great only in the rear.. def thinking on getting another clod to make brushless but thought it would’ve been way faster.
Yup, well done bro
Nice video bro
you love them clodbusters 🤗
Nice setup.
Awesome 👍😎
I use a dumboRC controller. I wired in a self-centering 3-position switch that controls the rear steer like a dream! I wired it into the 3rd channel. I can give you more details if needed.
That gas 4way manifold you built is dope
It works awesome but I didn't make it
you might want to look at one the spektrum radio systems. I own the spektrum dx5c and its a good remote. also the switches are sideways then on the up or down buttons. Futaba are also good radios too. I hope this helps! ;)
The dog in the background wanted chase it. Lol
Not sure if you checked it out but the noble nb4 is perfect for rear steer.
Flysky GT5. Tough to beat in general but does really well with 4WS.
First!! still watching. you should check ..can't you use a program card and just reverse one motors rotation? I think the radiolink radios can do the 4 steer look into it and find out for sure.
I tried everything I don't think they're reversible I might try calling hobbywing and see what they say
Depending on your budget i would suggest castle creations mamba x or copper head. Personally i love the mamba x mostly because i like trying to get the most out of the setup, plus it is highly tunable with the castle link
I'll pick some up. Thanks for the tip
Also, get a flysky gt5 or Nobel for easy 4 wheel steering mixing
I bought the gt5 for the 4wheel steering it is so nice..
Bad Ass bro 👍👍👊🏻👊🏻
I have a quick question. I wanna do a brushless setup on mine. Just wanna make sure I have this info right. So I need two esc/motor combos and I set one up to go forward and the other esc/combo I set to go reverse. Now my question part. If I'm going sensored castle I just go into the esc setting and choose reverse for motor direction. Where if I go non sensored I just have to switch the wires to make the motor go in reverse. love your videos by the way I just recently found this channel.
Yes that's correct. Sensorless just switch the motor wires
i use a y adabper with a servo reverser circut, then it acts like a stock clod but with 2 servos
but you wont have indepentend control,
Flysky gt5 it comes with 4 wheel steer programed in it 6 chan also cost about 65 bucks or so with reciver multi model radio also..hope that helps
Cool I'll check it out. Thanks
Futaba all the way for a radio. They are higher quality and feel better than other radios I’ve used. They also have a fast response time. The receivers can be expensive, and a good transmitter is pricey, too. I use a 3pv for my Clodbuster, and it has rear steer mixing. You’ll want a 4pm if you want to use a button to switch between no rear steer, crabwalk, or normal rear steering because the 3pv can’t seem to do that for some reason. You’ll also want a 4 channel receiver because on the 3pv, the third channel can only be used for throttle mixing or the switch and the fourth channel is for steering mixing, not sure on the more expensive radios.
I like futaba that's what I've always run I'll check out that 4pm
@@clodbusted1776 the t4pm is an awesome radio for just about anything, I use it for 10th scale onroad racing
Pretty cool! What's the wheelbase on that? Looks quite a bit longer than stock Clod.
It's about one inch longer than a stock clod
Radiolink for steering.
Wow, what part is original clod ? Diffs & wheels? Awesome !
Pretty much the only original parts are the wheels, tires, bumpers and diff cases. The axle tubes are aluminum I just painted them black so they look stock
I just read when using the tamiya sensored esc that you can switch wires from ABC on the motor to connect to CAB on the esc to reverse the motor direction but timing should be set to zero.....
I'll have to look into that. The rear motor is the one that gets reversed and that motor stays at 0 timing
@@clodbusted1776I believe 13.5t brushless is a 3300 kv (rmp per volt)
Sempre quiz ter uma cludbuster.
I'm new here I wanted to know if you sell the servo mounts I can't find them on the Internet I think you said you're custom made Em I would like to know if I could get a pair how much
Sure. I'll make you a pair I should be able to get them done this week. $20 for the pair
Email me at
aggravatedassaultmt@gmail.com
Are you still making/selling clodbuster chassis?
Not right now because I'm very busy with other stuff but I might make some more soon
I guess I’m curious as to why you need 2 ESCs
With brushless you have to run two esc's because two motors would be too much of a draw off one esc
What are your motor specs?
13.5 turn trinity x factor. Not sure kv rating
Mamba x ESCs and Flysky Noble NB4
Thanks I'll check that out
Hey buddy, I'm looking to buy a good stock 90's clodbuster, if you have one your willing to sell me please let me know a price, thanks
Not really looking to sell any right now
What do you think about doing a rear steer lockout I can't never get the all wheel steering right
I think if set up properly the rear steer is good to have