@@dannyjohnsonsgarage I tried the motor on Amazon you had listed. When I bolt it up I can maybe get 2 out of 3 bolts it’s like the motor was not thick enough. When I tried it out I would spin but not link up with the window. I tried to put the stock back in but it seems to be too thick to get back in. I hope I didn’t snug the aftermarket one up too much where I closed the gap between the bracket and door
To anyone who is no professional by any means that's about to try this: Do not let freeing the motor make you think that's the hardest part! Super easy! I was able to reach behind the speaker and through the bigger whole to the left and use both hands to push the motor off the teeth. I was literally hugging the door lol. The Speaker removal feels extra but is a great idea for reach. I was lucky enough that the motor and teeth sorta fell into place, which made the starting top bolt easy to get in and hold the motor as a guide. Total install took me about 20 min. Got my part from a local Autozone. Thank you, DJG!
I went and bought a motor for my driver side window I watched this video and beat on my old motor and it came back to life lol thanks for saving me $65
Thank you so much for this video! I just did this on my 04 GT today. Followed your instructions and also loosened but did NOT remove the two nuts for the regulator close to the window motor bolts like others have mentioned. It was a piece of cake. Took all of 30 or 45 minutes to finish and ive never done a window motor before. Excellent how to video!
If you loosen to two nuts that are go to the regulator next to the motor it comes out much easier. I replaced mine with a doorman with a lifetime warranty for $60. It is a little thinner so it is easier to install. Works perfect now.
I finally fixed my daughters window! I had a new motor for drivers side and wouldn’t you know it was the wrong motor! I recalled your tip on tapping old motor part and success! Now my daughter has both windows working! Now I just have to figured out the ac blowing hot!
Great job. On my mach 1 when the window motor froze, I took the door panel off and lightly tapped the circular part of the motor that you can see through the hole and it unbound the motor and freed it up.
Thank you for all the info...changed my passenger side motor today on my 94 Cobra and it went off without a hitch...going through the speaker opening was genius!
very informative and well done. getting ready to purchase another 94 to 04 Mustang in the next few days, so doing my homework to refresh myself as to what I can repair.
Great video. I took my door panel off and gave the motor a couple hits with the butt end of a screw driver and it started working again. Thanks for posting.
THANK YOU SO MUCH. This video helped me tremendously. I had zero problems replacing the motor. You were clear and showed us exactly what to do. Thank you again. You saved me. I picked up a used motor at a auto recycler for 20.00
Video helped tremendously, thank you for posting and explaining everything so clearly. And tapping with a dead-blow hammer fixed mine too! Thanks for that suggestion.
Johnnie Coats The hammer worked for a little while but went out again. I tore the motor down and used a spare from the passenger side I had. Here is that vidoe if you’re interested. Nice to know th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
If you would have loosened the bolts holding the regulator on, the window motor would have been easier to pull out. Just a helpful tip. Those would be the golden/brass 8/10mm bolts you see in the panel. Also, if you have a heat gun you can heat up the factory insulation (white plastic stuff) and pull it off the door. Just try not to overheat it and get it on your hands. The glue holding it on is very sticky. This way you can go ahead and just put the insulation back on and not tear it.
Thanks me and my man followed your directions and we got the job done just to find out it was off track on the regulator lol but hey thanks I just happy we saved 318 dollars
Thank you for making and posting this video! I'm extremely new to car diy and I just tried this on my 2004 Mustang V6 3.9L driver window. The tapping trick worked but only for maybe 2 minutes while I was testing the motor and then movement of the window. Thankfully I had not put everything back before finding this out. I'm 99% sure this means I need a new motor. Do you agree? Let me know and thanks again for the video, it's given me confidence to continue my diy car journey!
Yeah, it will more than likely need the new motor. I’m glad you found the channel, and feel free to browse my playlist for Mustang repairs you may need down the road. My whole purpose is to help people do it all and learn 👍🏼 th-cam.com/play/PLIjr-uSYDZi7hBrphoRniyYjb707PpPTu.html
** beating on old one definitely works! I bought a new motor but once I got old one out, two strikes with a dead blow hammer and good as new lol. ("How we fix things on Russian space station!")
I found this video very helpful with instructing me (a young gal) to accomplish a task that I was intimidated on doing myself. Followed this video all throughout the process of working on my 04 mustang. Please keep making these video!!!
Kayla Rutledge I’m glad to hear that Kayla! I have a ton of videos already made and more to come. Take a look and stay subscribed! 👍🏼 th-cam.com/play/PLIjr-uSYDZi7hBrphoRniyYjb707PpPTu.html
@@dannyjohnsonsgarage I have had 2 of these by cars now. My current one is a 04 GT but I had a V6 03 and it was going on and off all the time. Mostly when I left the car on the direct sunlight It 💯 wouldn't work ,it's like it needed to cool down. Would a new motor fix that kind of problem? Because that was happening to my current car before it got stuck
@@dannyjohnsonsgarage quick update: After a week of being parked, my window did not work today,so I waited till night for it to cool down and it worked back again 😂. Anyways... Ordered a new motor from LMR today because I don't wanna be surprised someday when it suddenly stops working again lol
Cristian Ramos You may have seen my last video where I swapped the motor from my spare passenger side motor since mine wasn’t working again. Saved me some cash lol
Very GREAT video.... I recently purchace a 2002 mustang. The driver window would not roll down.(new switch on driver pannel) i will utilise this info and possibly replace the window motor (if need be). GREAT VIDEO. Subscribed.
Justin MCQUAID Welcome to the channel, and congrats on your new mustang. I have a video on just about anything you will need from fuel pump and filter replacement to pulling the engine. Feel free to look around. Thanks for subscribing and let me know if you need help on anything! 🙏🏼
Thanks for a great video with good details. Getting ready to do this on my Mustang. Pretty familiar with it from my F-150, looks like the same motor. At least Ford drilled the holes for the bolts, they didn’t in the F-150 of the same era.
I noticed that on the 96 and up its a little bit easier to get out than the 94-95. I think the metal on the door was slightly different. I changed both my drivers motors on my 94 gt and my 96 cobra. The metal frame was a tighter fit on the 94-95's. Im a pro at changing s many of these on foxes and sn95's,lol
Mine would only click and not work at all. You can try tearing yours down to see if it needs to be cleaned or has chipped teeth etc th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
Does the window have to be in the up position when replacing the motor, and if so. Do you need to find a way 2 lock the window in place so it dont fall when you pull the motor?
The window needs to be up so the glass isn’t down in the door and in the way as I recall. Other than that it didn’t seem to fall because the regulator is moved by the motor and it’s still holding it
Not a mechanic genious, but maybe follow steps to unbolt the wondow motor and pulll the window up. Then re-connect the window motor (or hit the motor to free it as stated in video) to leave your window at fully closed position?. Best logic i can give. Hopefully i can help out. 👍
Great video, hoping your still reading comments, for the rear windows I can find motors for them, on rockauto and any auto parts store/website it says the rear and front are the same part, but I can only find regulators for the front windows, doesn't seem the rear windows have regulators, or at least can't find them on any website and can't find any info on this, so my question is do the rear windows have regulators at all and I stead have another system?
I haven’t owned a convertible and haven’t seen, but I imagine they also have a window motor. The left and right are side specific, but you can disassemble them and use the base for either side if that at all helps. th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
Hi, great video. I have a 2002 ford mustang. The passenger side window goes up and down good. But lately it looks like something is scratching the glass from inside when i lower the window. What do you think it is causing this?
That makes it a bit tricky. The window only really moves if the motor is out. You can try swapping switches and slamming the door to get it to work again, but if not, you may need to disassemble the window track. Can’t tell you for sure th-cam.com/video/0wkFs1eWZ8E/w-d-xo.html
Can anyone tell me if it’s possible to install smart window motors in a SN95 that have the short drop glass feature that’s common on more modern convertibles and coops? I have a 2004 convertible that could really use this feature.
IS IT POSSIBLE , TAKING A LITTLE EXTRA TIME , TO PLUG DRIVERS SIDE MOTOR TO PASSENGER SIDE CONNECTION TO SEE IF DRVERS SIDE MOTOR WORKING OR NOT. BEFORE BUYING MOTOR
Couldn’t help but notice that you changed cars/sides. Since I’m getting ready to change my passenger side, any light to shed on what went wrong or things to watch out for? Thank you for the video.
M M Correct. I used my video I already had for removing the door panel since that video covered the mach tweeter and my GT didn’t have it. When possible I like to give the more complex steps so people who have the mach audio system know what to do 😉 Just take it slow and follow the video’s steps and you should be fine. My window motor just needed a little tap and it worked again, but needs that often, so a new one doesn’t hurt.
Anyone have any ideas as to why, when my window gets almost to the top, it starts knocking and stops going up. Is it off track or is that a bad window motor? Cause the motor is weak, but it still rolls up and down. Any help is appreciated before I go spending money on unnecessary things.
About $40 www.amazon.com/gp/product/B000BZAHT8/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=2004047-20&creative=9325&linkCode=as2&creativeASIN=B000BZAHT8&linkId=7c15501d066eaa4d86d7c4aaea1dbdd9
Use painters tape to keep the window up . Somebody else it's hard to see But yes the window needs to be up. Secondly I went through the speaker hole and the other hole between the 2 it went right in. This isn't hard at all
Why can't any video tell me or show me I put in what's wrong and nothing everyone problem must be different than mine I have new motor new switch even new auto window down box no fuses are blowed relays are good why can't anyone tell me what's wring with my windows
Driver side and passenger side are specific, so make sure it’s the right one, next, look at how it should sit as I show it in the video. Next, you may need to wiggle it a bit (or even move the widow down a little so the teeth line up
My driver side window wouldnt roll down and banged on the motor and i got it to roll down but now its not rolling back up. I took the switch panel off cause i thought maybe the switch was not working and when i put it back on none of my windows are working now. I replaced the 20a circut fuse under the driver sides fuse panel and the fuse under the hood was good and nothing is working still. Any ideas?
Thank you for covering all the details and nuances. This really takes the mystery out of repair jobs.
Very welcome
@@dannyjohnsonsgarage I tried the motor on Amazon you had listed. When I bolt it up I can maybe get 2 out of 3 bolts it’s like the motor was not thick enough. When I tried it out I would spin but not link up with the window. I tried to put the stock back in but it seems to be too thick to get back in. I hope I didn’t snug the aftermarket one up too much where I closed the gap between the bracket and door
To anyone who is no professional by any means that's about to try this:
Do not let freeing the motor make you think that's the hardest part! Super easy! I was able to reach behind the speaker and through the bigger whole to the left and use both hands to push the motor off the teeth. I was literally hugging the door lol. The Speaker removal feels extra but is a great idea for reach.
I was lucky enough that the motor and teeth sorta fell into place, which made the starting top bolt easy to get in and hold the motor as a guide.
Total install took me about 20 min. Got my part from a local Autozone.
Thank you, DJG!
I went and bought a motor for my driver side window I watched this video and beat on my old motor and it came back to life lol thanks for saving me $65
Thank you so much for this video! I just did this on my 04 GT today. Followed your instructions and also loosened but did NOT remove the two nuts for the regulator close to the window motor bolts like others have mentioned. It was a piece of cake. Took all of 30 or 45 minutes to finish and ive never done a window motor before. Excellent how to video!
If you loosen to two nuts that are go to the regulator next to the motor it comes out much easier. I replaced mine with a doorman with a lifetime warranty for $60. It is a little thinner so it is easier to install. Works perfect now.
I wish I had seen this comment before starting mine, but I figured it out anyway. You are right way easier !!!
I love it that there's a Terminator sitting in the garage, too. My wife has an '01 Bullitt and I have an '03 Mach 1. We love our New-Edge Stangs!
I also have a 2003 Mach 1 in the garage 👍🏼
I finally fixed my daughters window! I had a new motor for drivers side and wouldn’t you know it was the wrong motor! I recalled your tip on tapping old motor part and success! Now my daughter has both windows working! Now I just have to figured out the ac blowing hot!
You can swap the base over from the new motor. I had the same situation th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
Danny Johnson’s Garage I may just do that down the road. I’ll hold onto it for spare in the future.
Great job. On my mach 1 when the window motor froze, I took the door panel off and lightly tapped the circular part of the motor that you can see through the hole and it unbound the motor and freed it up.
Thank you for all the info...changed my passenger side motor today on my 94 Cobra and it went off without a hitch...going through the speaker opening was genius!
This is the BEST video for this‼ Straight to the point without too many unnecessary details ‼👍👍👍👍👍
SoUtH MeMpHiS I’m glad you enjoyed it 👍🏼
very informative and well done. getting ready to purchase another 94 to 04 Mustang in the next few days, so doing my homework to refresh myself as to what I can repair.
Great video.
I took my door panel off and gave the motor a couple hits with the butt end of a screw driver and it started working again. Thanks for posting.
THANK YOU SO MUCH. This video helped me tremendously. I had zero problems replacing the motor. You were clear and showed us exactly what to do. Thank you again. You saved me. I picked up a used motor at a auto recycler for 20.00
I’m glad you enjoyed the video. If you haven’t yet, please feel free to subscribe and enjoy my other videos. 800 and counting.
Thanks for the advice on tapping on the old motor. That brought my old one back to life and save me some money.
Works often. 🙌🏼👍🏼
@@dannyjohnsonsgarage but for how long?
Brian Ball It really depends. My truck’s still works 7 years later. This one stopped about a year later th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
Video helped tremendously, thank you for posting and explaining everything so clearly.
And tapping with a dead-blow hammer fixed mine too! Thanks for that suggestion.
Johnnie Coats The hammer worked for a little while but went out again. I tore the motor down and used a spare from the passenger side I had. Here is that vidoe if you’re interested. Nice to know th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
If you would have loosened the bolts holding the regulator on, the window motor would have been easier to pull out. Just a helpful tip. Those would be the golden/brass 8/10mm bolts you see in the panel.
Also, if you have a heat gun you can heat up the factory insulation (white plastic stuff) and pull it off the door. Just try not to overheat it and get it on your hands. The glue holding it on is very sticky. This way you can go ahead and just put the insulation back on and not tear it.
THANKS! You make me easy replace my, many videos said that you have to remove the tracks but you have the #1 easy video 👍🏻👏
My window won't go down, so now I know what I need to do. Thank you for this video.
Remember when we didn't have videos to help us out with things like this (I'm a bit old) lol but it does help to see how things go
Yeah, it was the haynes manual or nothing. I figure im making the new generation manuals
Thanks me and my man followed your directions and we got the job done just to find out it was off track on the regulator lol but hey thanks I just happy we saved 318 dollars
Thank you for making and posting this video! I'm extremely new to car diy and I just tried this on my 2004 Mustang V6 3.9L driver window. The tapping trick worked but only for maybe 2 minutes while I was testing the motor and then movement of the window. Thankfully I had not put everything back before finding this out. I'm 99% sure this means I need a new motor. Do you agree? Let me know and thanks again for the video, it's given me confidence to continue my diy car journey!
Yeah, it will more than likely need the new motor. I’m glad you found the channel, and feel free to browse my playlist for Mustang repairs you may need down the road. My whole purpose is to help people do it all and learn 👍🏼 th-cam.com/play/PLIjr-uSYDZi7hBrphoRniyYjb707PpPTu.html
All your videos are super in depth and helpful, thank you!
Danny - thanks...gives me courage to fix mine on my 2001 GT!
** beating on old one definitely works! I bought a new motor but once I got old one out, two strikes with a dead blow hammer and good as new lol. ("How we fix things on Russian space station!")
Great video thanks to this my window motor was replaced in no time!!!
Shogun Drummond I’m glad you found it! Feel free to subscribe and see my other videos. 700 and counting
Many thanks for this video.👍 Just replaced the motor. Glad I could use this as a reference..
I found this video very helpful with instructing me (a young gal) to accomplish a task that I was intimidated on doing myself. Followed this video all throughout the process of working on my 04 mustang. Please keep making these video!!!
Kayla Rutledge I’m glad to hear that Kayla! I have a ton of videos already made and more to come. Take a look and stay subscribed! 👍🏼 th-cam.com/play/PLIjr-uSYDZi7hBrphoRniyYjb707PpPTu.html
Thanks ! Mine only needed a good smack, thank God I tested that before ordering a new one , let's see how long before I need to
Mine needs another wack again, or replaced would be best 😅
@@dannyjohnsonsgarage I have had 2 of these by cars now. My current one is a 04 GT but I had a V6 03 and it was going on and off all the time. Mostly when I left the car on the direct sunlight It 💯 wouldn't work ,it's like it needed to cool down. Would a new motor fix that kind of problem? Because that was happening to my current car before it got stuck
Cristian Ramos A new motor should fix the issue.
@@dannyjohnsonsgarage quick update: After a week of being parked, my window did not work today,so I waited till night for it to cool down and it worked back again 😂. Anyways... Ordered a new motor from LMR today because I don't wanna be surprised someday when it suddenly stops working again lol
Cristian Ramos You may have seen my last video where I swapped the motor from my spare passenger side motor since mine wasn’t working again. Saved me some cash lol
Thanks for the video it was super easy
Broo thank you so much!! its going to be alot more fun driving this thing with my window down 💪
Thanks for the guide man, helped me out a lot.
Thanks for the video it really help me to replace my motor.
Bro you just saved me 100 bucks and a lot of time. Love what you do man, keep it up 😁👍🏼
Very GREAT video.... I recently purchace a 2002 mustang. The driver window would not roll down.(new switch on driver pannel) i will utilise this info and possibly replace the window motor (if need be). GREAT VIDEO. Subscribed.
Justin MCQUAID Welcome to the channel, and congrats on your new mustang. I have a video on just about anything you will need from fuel pump and filter replacement to pulling the engine. Feel free to look around. Thanks for subscribing and let me know if you need help on anything! 🙏🏼
Thinks this video help me out because I has to change both of window motor's on my car.
Thanks for making this video! Helped me so much!
Thanks for a great video with good details. Getting ready to do this on my Mustang. Pretty familiar with it from my F-150, looks like the same motor. At least Ford drilled the holes for the bolts, they didn’t in the F-150 of the same era.
Also, they are side specific but you can swap the bottom part th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
I noticed that on the 96 and up its a little bit easier to get out than the 94-95. I think the metal on the door was slightly different. I changed both my drivers motors on my 94 gt and my 96 cobra. The metal frame was a tighter fit on the 94-95's. Im a pro at changing s many of these on foxes and sn95's,lol
MORBID FOX MUSTANG They probably had an update on the door design in 1996.
@@dannyjohnsonsgarage Thats exactly what it was.
Here we go! I’m doing this now!
This is fucking terrible. It won’t go in.
GOT IT!!!!!!
EXCELLENT, GREATLY APPRECIATED.
Thank you
Thankyou for you video 🙏
Posted this the week after I replaced my motor and regulator😂
2003azuremach1 Ha ha, what timing!
Can I peel the plastic moisture barrier instead of cutting it open, so I can put it back in later ?
Yes, give it a try
Thank you 🙏🏻
Question, what problem did you have with your motor? Mine sounds like the gear is pretty grinded and it shutters
Mine would only click and not work at all. You can try tearing yours down to see if it needs to be cleaned or has chipped teeth etc th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
worked like a charm
thanks man
Thanks man good info
Can you make a vid about uneven windows. Seems like I can’t fully close my door if the window is all the way up. 😐
A 8 Sounds like the track might be bent or a rivet came out on the track
Thank you so much, I used your video. Unfortunately, my hands/arms aren’t the ideal size for the job and I struggled a lot 😔
Thanks for this man!
You got it! Many more like it in my playlist th-cam.com/play/PLIjr-uSYDZi7hBrphoRniyYjb707PpPTu.html
Gracias Bro !!
Does the window have to be in the up position when replacing the motor, and if so. Do you need to find a way 2 lock the window in place so it dont fall when you pull the motor?
The window needs to be up so the glass isn’t down in the door and in the way as I recall. Other than that it didn’t seem to fall because the regulator is moved by the motor and it’s still holding it
awesome video. if my window is off the track, do i need a whole new window and assembly? or can i just readhesive the window back onto the track?
lah2174 The window is riveted on to the track, so you would need to either fix the rivets, or possibly use a nut and bolt in its place
Question: How can I raise the window first to replace a bad motor?
It failed while down.
Not a mechanic genious, but maybe follow steps to unbolt the wondow motor and pulll the window up. Then re-connect the window motor (or hit the motor to free it as stated in video) to leave your window at fully closed position?. Best logic i can give. Hopefully i can help out. 👍
Hello, good afternoon friend
Hello
is there a trick to getting it lined up? I can barely get my hand in far enough to hold it in place and I just can't get it screwed in.
Is the passage window motor for the back window too?
I have 02 mustang convertible and my passenger side back window won’t go up
I’m not sure. You’d have to compare part numbers
Great video, hoping your still reading comments, for the rear windows I can find motors for them, on rockauto and any auto parts store/website it says the rear and front are the same part, but I can only find regulators for the front windows, doesn't seem the rear windows have regulators, or at least can't find them on any website and can't find any info on this, so my question is do the rear windows have regulators at all and I stead have another system?
I haven’t owned a convertible and haven’t seen, but I imagine they also have a window motor. The left and right are side specific, but you can disassemble them and use the base for either side if that at all helps. th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
Good stuff!!! Thank you!!!!!!!
You got it! Thanks for watching, and subscribe if you have not! 🙂
Do u have a video for replacing whole window regulator for 94-04?? Thanks your videos are the best.
This video for removing the window should get you pretty close. th-cam.com/video/0wkFs1eWZ8E/w-d-xo.html
@@dannyjohnsonsgarage thanks man.
Hi, great video. I have a 2002 ford mustang. The passenger side window goes up and down good. But lately it looks like something is scratching the glass from inside when i lower the window. What do you think it is causing this?
I would see if anything is going on with the weather strip or if anything got in it th-cam.com/video/fKiaBrJhMxE/w-d-xo.html
I hope this works for my daughters car! I’ll be doing this come the weekend!
Brandon Hudson They motors are side specific, but you can swap the motor if they don’t have the side you need th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
Danny Johnson’s Garage I got the one for her driver side window. I replaced the window switch hoping that was it but nope!
Brandon Hudson That was a good place to start. It’s good you checked first
But wait my 2000 Ford Mustang driver side window is stuck down so can I replace it with the window down ?
That makes it a bit tricky. The window only really moves if the motor is out. You can try swapping switches and slamming the door to get it to work again, but if not, you may need to disassemble the window track. Can’t tell you for sure th-cam.com/video/0wkFs1eWZ8E/w-d-xo.html
Can anyone tell me if it’s possible to install smart window motors in a SN95 that have the short drop glass feature that’s common on more modern convertibles and coops? I have a 2004 convertible that could really use this feature.
IS IT POSSIBLE , TAKING A LITTLE EXTRA TIME , TO PLUG DRIVERS SIDE MOTOR TO PASSENGER SIDE CONNECTION TO SEE IF DRVERS SIDE MOTOR WORKING OR NOT. BEFORE BUYING MOTOR
Yes, and you can use the motor portion from one side to another th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
I lost the screws to the window motor. Will somebody tell me what size and where to purchase them from
Holy moly my motor is tight in there 😂
Jason Pooler They don’t give you a lot of room for sure lol
Danny Johnson nope but luckily got it off my motor is screwed tho haha
Couldn’t help but notice that you changed cars/sides. Since I’m getting ready to change my passenger side, any light to shed on what went wrong or things to watch out for? Thank you for the video.
M M Correct. I used my video I already had for removing the door panel since that video covered the mach tweeter and my GT didn’t have it. When possible I like to give the more complex steps so people who have the mach audio system know what to do 😉
Just take it slow and follow the video’s steps and you should be fine. My window motor just needed a little tap and it worked again, but needs that often, so a new one doesn’t hurt.
Danny Johnson thanks a million. Take care.
Thank you. Do you have a video where to fix the gauge of the few
Which gauge?
@@dannyjohnsonsgarage the fuel. It's empty but it still shows that I have a quarter left
Does the window have to be up to do this? Mines stuck down.
Yeah, it will be in the way, so you will have to try to assist it up when the door panel is off
The mechanic is trying to get my friend to pay 800 for a window motor replacement, how do I convince him to fix it himself?
Have them watch this video and ask if they really want to lose that much money- or offer to do it for $200 😀
Anyone have any ideas as to why, when my window gets almost to the top, it starts knocking and stops going up.
Is it off track or is that a bad window motor? Cause the motor is weak, but it still rolls up and down. Any help is appreciated before I go spending money on unnecessary things.
Where did you find the door panel ?
How much does the motor cost
About $40 www.amazon.com/gp/product/B000BZAHT8/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=2004047-20&creative=9325&linkCode=as2&creativeASIN=B000BZAHT8&linkId=7c15501d066eaa4d86d7c4aaea1dbdd9
What should I use to take out the three 8mm bolts
I would use a 8mm socket with a small extension (or a deep socket).
Phat Groovez
Wat if the window is down
Use painters tape to keep the window up . Somebody else it's hard to see But yes the window needs to be up. Secondly I went through the speaker hole and the other hole between the 2 it went right in. This isn't hard at all
Why can't any video tell me or show me I put in what's wrong and nothing everyone problem must be different than mine I have new motor new switch even new auto window down box no fuses are blowed relays are good why can't anyone tell me what's wring with my windows
Anyone can replace a motor or switch it's command since which some people don't have please help with my windows please
Was kind of hard getting the old motor out but the new one went in easily
Tim Garroutte Yeah, seemed to happen to me too
You must have smaller hands than I do
Wicking a motorcycle just to get it up or down until you replace your motor with a new one! Wicking it does NOT fixes it 🤦🏻♂️
I literally can’t even put it back in like it won’t fit bruh
It can be pretty tight. Try to pull the door panel towards you where it bolts in
@@dannyjohnsonsgarage thanks for the tip! I just loosened two bolts that held the rail in place to push it a bit further in
#whackthatmotor
I can't get it back in oh god lol
Driver side and passenger side are specific, so make sure it’s the right one, next, look at how it should sit as I show it in the video. Next, you may need to wiggle it a bit (or even move the widow down a little so the teeth line up
Danny Johnson’s Garage I have the correct side one I'm gonna try to wiggle it in more tommorw
Danny Johnson’s Garage my passenger side window is all the way up you think I should push it down a little ? To put the new motor in
My driver side window wouldnt roll down and banged on the motor and i got it to roll down but now its not rolling back up. I took the switch panel off cause i thought maybe the switch was not working and when i put it back on none of my windows are working now. I replaced the 20a circut fuse under the driver sides fuse panel and the fuse under the hood was good and nothing is working still. Any ideas?