5:42 - shock absorbers doesn't work. Usage of bearings as shims is also useless. Shock absorbers should be put vertically for each fork with two wheels or two absorbers (for each wheel single absorber). Also the second pair of shims should be on a bottom side or the board.
For the bearings as spacer, he is just using the resources he only have most likely he don't have other spacer and for the shocks it is correct and functional even if it is not place to the usual vertical position
The most simple way to make 6 or 8 wheels skateboard - Nice. For more than 5 years im searchin how to do that. I found about 5 options, but this is the best - you don’t need to cut the deck, the manufacturing cost is as low as possible, there is no need for additional stabilizing springs or splitter travel stops for 2 wheels, besides, you can at least replace all the wheels with motor wheels if necessary. by the way, you can print soft plastic tires for motor wheels on a 3D printer - it is similar in composition to polyurethane for shoe soles and is just as wear-resistant.
I wonder how people can think they're being innovative and yet over complicate a skateboard with shocks that don't do anything because they're dragging behind and adding another point of impact... Do you really think this useless part is creative? or is it just a useless part? Honestly, this would be like adding another tire to the back of a bicycle and calling it a shock absorber just because there's a spring in between.
You tyrelled the heck out of that board. I bet its heavy AF now, also the rear and the (most delicate) part still does not have suspenssion, so take it easy with the curbs.
this is so rad - I don't know what any of the haters are off about because they looked pretty rad to me and seemed to work pretty great! cheers thanks for sharing my guy
Because it's a blatent rip off of an existing product that lame to begin with that's why. This hack didn't mention that did he? It doesn't ad any shock absorbing at all. All it does is add drag that will kill the range of the board. This guy is a fool ,fraud,and a hack
Probably even better. I suspect that the turning ability of this board diminished, the weight increased for sure, most of the shock absorption is still done by the springy deck and the bushings of the trucks, and he could probably get what he wanted by simply increasing the height of the trucks. Over engineering at its finest.
I mean at one point yes and also not cause the shock absorbers puts a bit force on the front wheels to keep em on the ground but i do see what u mean about it
What shock is that supposed to absorb? The full impact will still go to the wheels that are directly attached on bottom, all that is doing is adding another point of impact. There is no way that can absorb shock.
Why do you need those bearings? Doesn't look like something is rotating there. For me it's just half of ton of extra weight. But maybe there is a need I don't see.
0:35 you could EASILY skate down that curb without any modification to the board lol. Just bend your knees and get up some decent speed before rolling off the curb. With enough speed, the board will have enough momentum to clear the curb without scraping, and bending your knees will keep your center of gravity low enough that you can keep your balance.
Hi 👋 there well actually came accords your comment list and I though you might be interested in earning money constituently by trading the crypto currency market?
Hi 👋 there well actually came accords your comment list and I though you might be interested in earning money constituently by trading the crypto currency market?
1. Swingarms should be light so steel and heavy bearing as spacers are not good choice (unamortizes mass!). Should be aluminium and alu spacers. 2. Spring is to stiff. We could see that have no function and don't bear any load. 3. Idea and general design are OK and this is reason for thumb up.
the amount of weight he just added to that board will now kill the battery a lot faster. why didn't he make it out of aluminum and used tubing for spacers instead of bearings? he added at least 30 lbs to the front end.
![สาวเมืองเพชร - ธีเดช ทองอภิชาติ [Official MV]](http://i.ytimg.com/vi/kEt7F9PvO3I/mqdefault.jpg)
5:42 - shock absorbers doesn't work. Usage of bearings as shims is also useless. Shock absorbers should be put vertically for each fork with two wheels or two absorbers (for each wheel single absorber).
Also the second pair of shims should be on a bottom side or the board.
Exactly what's on my mind.
For the bearings as spacer, he is just using the resources he only have most likely he don't have other spacer and for the shocks it is correct and functional even if it is not place to the usual vertical position
Right 😆
People hate everything lol
Facts! Still very cool looking though
The most simple way to make 6 or 8 wheels skateboard - Nice. For more than 5 years im searchin how to do that. I found about 5 options, but this is the best - you don’t need to cut the deck, the manufacturing cost is as low as possible, there is no need for additional stabilizing springs or splitter travel stops for 2 wheels, besides, you can at least replace all the wheels with motor wheels if necessary. by the way, you can print soft plastic tires for motor wheels on a 3D printer - it is similar in composition to polyurethane for shoe soles and is just as wear-resistant.
sometimes i wonder that how much people in the world are so creative and simplify life . super coooooool job man .
I wonder how people can think they're being innovative and yet over complicate a skateboard with shocks that don't do anything because they're dragging behind and adding another point of impact... Do you really think this useless part is creative? or is it just a useless part? Honestly, this would be like adding another tire to the back of a bicycle and calling it a shock absorber just because there's a spring in between.
@@sylver369 lol i thought it was fun and creative
Where are the shock absorbers from? And what are they called?
What an invention
Empresiv job 👍🙂
Magnifique je suis un Fan du Maroc Bonne continuation mon ami
You are arranging some readymade products like that shock absorber and extra tires etc?
Bearing what for ?
This guy is an alias of "The Q" channel 💯. There's absolutely no doubt!
Tio
Please watch the new video
More Q always better 😂
But his vids older than the q vids
I ride a bike wheeler setup as well, but with 11 inch hub motors in the back and 107mm MBS Reds up front, and I don't have the spring suspension
You tyrelled the heck out of that board.
I bet its heavy AF now, also the rear and the (most delicate) part still does not have suspenssion, so take it easy with the curbs.
Skateboard P34 😅
this is so rad - I don't know what any of the haters are off about because they looked pretty rad to me and seemed to work pretty great! cheers thanks for sharing my guy
Because it's a blatent rip off of an existing product that lame to begin with that's why. This hack didn't mention that did he? It doesn't ad any shock absorbing at all. All it does is add drag that will kill the range of the board. This guy is a fool ,fraud,and a hack
Parabéns, gostaria de fazer um sistema igual a esse para o meu e-board.
0:46 you forgot the controller my man 🥱
New video is coming please watch
How about by increasing ground clearance
Very Interesting longboard trucks
Зачем он подшипники вместо шайб ипольовал?
no hate or something but I'm 100 percentage sure that without the shock absorbers would work exactly the same
Probably even better. I suspect that the turning ability of this board diminished, the weight increased for sure, most of the shock absorption is still done by the springy deck and the bushings of the trucks, and he could probably get what he wanted by simply increasing the height of the trucks. Over engineering at its finest.
I mean at one point yes and also not cause the shock absorbers puts a bit force on the front wheels to keep em on the ground but i do see what u mean about it
Wight blocks would do the same at this point
1:32 Was it possible to make two out of one iron plate?
add balancing brace for ur smoth drive
Excellent idea for the skateboard and I like it 🛹💡👍🏽👌🏽😊.
So nice idea. .👍
could be done with the rear wheels too
Awesome 👏
New video is coming please watch
This is very good video
Esta muy guapo , pero no aprovechas la suspensión y es una pena curártelo un poco mas, salud y saludos
do you sell the shock absorption kit?
Excellent and clean work 👏
nice work bro
What shock is that supposed to absorb? The full impact will still go to the wheels that are directly attached on bottom, all that is doing is adding another point of impact. There is no way that can absorb shock.
Great work 🎉🎉🎉🎉❤
Untruckin believable
와!!진짜 미쳤다!!!진짜 잘만들었다!!!^^
😊😊
Is very good, keren mantap 👍
Do you have 3d and 2d view electric skateboard please for help
Why do you need those bearings? Doesn't look like something is rotating there. For me it's just half of ton of extra weight. But maybe there is a need I don't see.
the style of work is same to "The Q" channel, btw well done
Hard tail?
Monsters
What is the use of the ball bearings?
Looks to me like they’re being used as expensive spacers.
I make videos like this please watch
Задняя зависимая, передняя не зависимая. Молодец 👍 good
Patent this board 👍👍👍
Awesome has been said a lot in the comment section, but any geek can appreciate this concept and its application 😁😁
Nicee. Creative
Brilliant idea! but I accidentally sliced my finger off from the angle grinder, now can I have my finger back?
even more perfect if the latter uses exactly the same as the front wheels
Esse pranchão e show
I love skateboard
Subscriped
Tem pra mobile?
Please watch the new video
😅where to get free bearings?
What was that automatic punch device that you used? And how can I get one if you don't mind me asking
It’s a automatic center punch. Get ‘‘em at hardware stores everywhere.
It’s a called a push punch.
Awesome idea but... Am I the only one who does not understand why he uses bearings for spacers?
I guess i wouldn't mind it cuz its just for the vid, you dont ned to do th sam tho
А ему их девать некуда...., у него дядя на подшибниковом заводе работает!😂
Am I the only one who wonders why he marked out his parts in the middle of the plate? Could have got two out of each plate at least.....
He had a bunch.
Cos it works
отличная идея 💡
необычные вид и главное рабочее)
New video is coming please watch
Да, особенно использование подшибников в качестве прокладки…
Nice but will be excellent if he made it at the rear too.
Hi bro, very nice work, can you send me the measurements?
12, 15, & 7
@@Brimannn1 Brother, with the measurements you wrote, the pieces are very large. Is there a chance you can send me drawings on paper?
@@Brimannn1 The measurements you gave do not match the measurements in the drawing in the video. Why are you giving wrong information?
Definitely 💯👍🏻🇺🇸
Very good
New video is coming please watch
0:35 you could EASILY skate down that curb without any modification to the board lol. Just bend your knees and get up some decent speed before rolling off the curb. With enough speed, the board will have enough momentum to clear the curb without scraping, and bending your knees will keep your center of gravity low enough that you can keep your balance.
Hello . I want byu it . Jow much cost your board ? I am from europe. I ll buy it
This is Possway T3 Board, you can buy it on www.possway.com/products/t3
I make videos like this please watch
good ide,, succes for u all ..
I have uploaded a new video please watch
Автор гениален, но сам создал для себя проблемы и героически решал их😁
Спасибо большое)
Очень полезно, кратко, понятно👍
Hi 👋 there well actually came accords your comment list and I though you might be interested in earning money constituently by trading the crypto currency market?
Why bearings ?
Mickey James Fox Mora perto do Mackenzie?
Broh hazlo con las 8 ruedas
Looks cool but those shocks are locked tight, maybe you need a smaller pair for urban travel.
New video is coming please watch
@@CreativeExtra okay!
Awesomeee!
Goo video👋
Nice
Can you make it for me please. Nice to see you
It's great, it's ok, you guys
Show, 👏
Today is Most excellent Day. ✅. 💓💓💓💓💓💓💓. ✅
00:46 The last record of the remote
Só não vi o amortecedor funcionar
Irado este skeite
Do both wheels
you may want to try a softer spring.
the suspension is not even working.
I have uploaded a new video please watch
This guy is a genius
Kit tecnológico eu quero um desses para mim acho que eu não sei onde eu compro.
what opening song?
Cool
Name of second song?
I've never seen anyone ride a possway before other then me. I thought I was like their only customer🤣🤣🤣🤣
amazing
New video is coming please watch
je to nej
А если ещё и назад такую же сделать, как и в переде
can you make me one and ship europe
+ de métal (fer) c'est + de poids ??? l'aluminium plus léger même pour les visses et le longboard ne perdras pas de sa puissance
it's going to bends. the heavyweight bends the main axis.i think so.
Почему ось вместо центрального болта не поставил?
Hi 👋 there well actually came accords your comment list and I though you might be interested in earning money constituently by trading the crypto currency market?
Awesome creating that delights our technology loving audience......
New video is coming please watch
Mind blowing bro
I have uploaded a new video please watch
1. Swingarms should be light so steel and heavy bearing as spacers are not good choice (unamortizes mass!). Should be aluminium and alu spacers.
2. Spring is to stiff. We could see that have no function and don't bear any load.
3. Idea and general design are OK and this is reason for thumb up.
no. you're wrong, everything you said basically comes down to personal opinion so pls consider shuttin df up next time
the amount of weight he just added to that board will now kill the battery a lot faster. why didn't he make it out of aluminum and used tubing for spacers instead of bearings? he added at least 30 lbs to the front end.
👍👍le mieux c'est des 4 ➕ 4
In Deutschland könnte man diese Ideen nicht ohne weiteres umsetzen ohne das es gleich Stress gibt, hier ist ja gefühl alles Verboten.
The Q style
再找中文留言嗎。恭喜你找到了