In my mind, all I keep thinking is this would get ripped out by heavy snow during the winter months if that's how we're actually supposed to mount the lip.
I take it he's never used a power drill before OR screwed anything into plastic? He's over tightenled and strippedevery screw hole. Hope the double face tape (they didn't shiw) holds it in place.
Everyone of those screws was over torqued, and these cars really need matching side skirts and diffuser if adding a lip. Just looks unfinished otherwise 🤷♂️ reason why I haven't put one on mine.
oh yeah those screws are stripped for sure. But the lip held on well. Yeah I agree that once you start adding aero pieces on one area, you'll have to do it the same all around. I am in that situation with my Camaro
Does the front lip get lose and you have to retap it? I always pulled bumper off drill holes and use bolts and nuts and it will never come off but I don’t want to do it to my Tesla 😂. I am afraid I might break a tab and then my bumper won’t be flush anymore.
We never had a problem with it coming loose at all. The real issue ended up being the "carbon" material stated chipping off over time. My guess was it hit something and water eventually ate up the material. Not sure. But it terms of fitment and staying in place, it was great!
Yes diff over tighten, looks good 👍 tho. But wondering if the screws have a rubber gasket for water cause u are drilling into the bottom, wondering if water would get in?
will the lip kit fall of when driving in high speed for a long time? i had a real carbon fiber lip kit with rods for my previous car (dodge charger) and when i went for a long drive it fell off. same install as what you did on the video just drilled into the bottom part of the bumper and the rods into the front lower grill.
I have same front lip installed. Instead of drilling into bumper, i drilled second hole on plastic belly to install 2nd screw. so yr painted bumper stays undamaged
Does it really matter if it's fake or not. It looks great, I'm ordering mine now and besides this fricken video you could never tell if it's fake carbon or not. Jeez
@@bljohn22bj you can see in the video it’s fake and you can see in person it’s fake from even further away. It’s a $50,000 car, that’s like putting $6000 HRE’s on a $15,000 Nissan Versa. Stop Shaq’n a fool.
@@entertainment72 I guess you wont be buying the spoiler then. Ppf, in addition to others items, I'm out of money. I will cut corners when possible and wont look back.
my favorite part is where he stripped every single screw
lmfaoooooo!
cringe every 5 seconds
Fyi:be careful lifting car,they recommend lifting pucks,easy to damage battery($16k).Also easy to strip screw holes with electric drill in plastic.
Yo thanks for that buddy!
Looks great. Very nice. You need to take it easy when you’re drilling in those screws way too fast, your going to strip them.
Yeah brice and I are looking at this video and face palming ourselves xD
I aligned mine to not drill into the paint. If I were to take it off the last thing you want are holes in ur front bumper
half of the Screws you stripped
Atleast you don’t have to worry about anybody stealing that lip after you turned the screws into security ones. #2 Phillips bit next time 👍🏻
LMFAOO bro, I just got around to reading the comments and 💀
Hearing that bit jump around made me cry
Bro, for us too, looking back at it!
Someone has to show this dude how a screw works !
Someone has to teach this guy how to jack a tesla.
In my mind, all I keep thinking is this would get ripped out by heavy snow during the winter months if that's how we're actually supposed to mount the lip.
Great video. Do you know what size screws you used?
Nice, I had the same lip on mine until my sister in law drove the car and cracked it.
sorry I wasn't sure about screws that you drill in. did you drill the screws into the main body?
Are the holes noticeable in the front bumper if you take off the lip?
Someone teach these kids how to use a damn drill. That was painful
Bro this! Looking back it’s cringe
Do the holes already exist on the bottom of the tesla bumper?
I take it he's never used a power drill before OR screwed anything into plastic? He's over tightenled and strippedevery screw hole. Hope the double face tape (they didn't shiw) holds it in place.
I think would look nicer if installed a bit higher. But still looks pretty cool
Despite it not being actual carbon fiber, the aesthetic looks good
Lol no it doesnt
Love it. Looks awesome!
Thank you! Cheers! Glad you liked it man :)
You know you stripped everyone of those screw holes. Getter a better drill with more controlled torque.
Hopefully he bought some pucks… denting that battery pack made me tear up a little!
:(
i buy Chinese carbon fiber stuff alllllllllllll the time. its great stuff.
Got a link to where he got the front upper carbon fiber wings?
I was asking lol
Should be in the description or in another video I made with 7 mods under 50$
What percentage tint is that
Wow it looks awesome! Do you know if the Model 3’s range is decreased after adding it?
I haven’t experienced any decreased range!
So what? 2 min extra on a super charge. Freaking range freaks
@@dvh8543 It was a question. Chill tf out bruh.
@@dvh8543 time is dime
Has the splitter fallen off yet 😭
NAH MAN! Lmfao, my friend sold that car like 2 years ago. But during the ownership it was rock solid. Anyone taking it off tho.... rip
Where do I get the light trims?
In the description bro :)
Everyone of those screws was over torqued, and these cars really need matching side skirts and diffuser if adding a lip. Just looks unfinished otherwise 🤷♂️ reason why I haven't put one on mine.
oh yeah those screws are stripped for sure. But the lip held on well. Yeah I agree that once you start adding aero pieces on one area, you'll have to do it the same all around. I am in that situation with my Camaro
I believe those were screws not bolts you stripped trying to install onto the car. I'm just being sarcastic. Looks good on that color.
Hhaha, I know bro. I tripped on the words. Thanks for the comment bud!
So cool def would get one!
Are they perfect fit, no hole drill under needed?
No not perfect fit. Need to hold it in hard before screwing in and align to center grill.
Did you screw into the actual bumper or the black plastic ?
bumper!
Does the front lip get lose and you have to retap it? I always pulled bumper off drill holes and use bolts and nuts and it will never come off but I don’t want to do it to my Tesla 😂. I am afraid I might break a tab and then my bumper won’t be flush anymore.
We never had a problem with it coming loose at all. The real issue ended up being the "carbon" material stated chipping off over time. My guess was it hit something and water eventually ate up the material. Not sure. But it terms of fitment and staying in place, it was great!
that means will drill for the front bumper?
I got the same one, no brackets or screws tho…? How do you install it without that?
It should have been in there bro! You can probably find the screws at a Lowes or Home Depot man.
@@gvaspirated nope, no brackets the company told me there is none but clearly there is. It brought it to a body shop they’ll figure it out
Looks great!
Did you guys have to drill into the bumper?
yes, on the bottom! part
you definitely already stripped a few of those screws.
:_(
Yes diff over tighten, looks good 👍 tho. But wondering if the screws have a rubber gasket for water cause u are drilling into the bottom, wondering if water would get in?
@@karatohongkongcat Hey man. I didn't see any gaskets that came with the screws. I doubt they come with them.
Ya, that lip probably fell off after 2 weeks haha
Dude you are over rotating the bolts... you are actually drilling the plastic out... this will be weak
yep they definitely stripped almost all of em
will the lip kit fall of when driving in high speed for a long time? i had a real carbon fiber lip kit with rods for my previous car (dodge charger) and when i went for a long drive it fell off. same install as what you did on the video just drilled into the bottom part of the bumper and the rods into the front lower grill.
Hey Joon, we went HAM with the car and have done speeds in private areas Of over 120HP. Held on just fine
Have a link for that lip? Seems thicker than others I’ve seen
in the description bro.
Hey bro is your car wrapped or is it the red color you got from the factory
Factory color!
Love the way your car is coming along. How is the pieces holding up? Is it peeling? I was thinking about getting the same.
Seems that the right side is peeling off.
Thanks for the comment bud! Glad you enjoyed
That sucks that is peeling. The car looks really sharp in the video.
Can you please share the link?
Link in the description below bro!
Oh fuck yes I’m buying this
FUCK YES! Hahaha, link below!
No need to drill holes?
Is that fake carbon fiber or real carbon fiber?
Fake bro
@@gvaspirated still not bad for $40 can’t tell from video so looks good, but that mp3 deserve real CF though 😆
Ain’t no way I’m drilling into the paint no no no
You drill into the black plastic, not the paint
Does this fit 2021 model?
I'm not sure. Did the 2021 do a face lift of any kind? If not, it should work.
does the middle drill into the paint? great video btw! just order mine
Yeah bro!
@@gvaspirated so it does drill into the paint?
@@1990lofi yeah but its plastic....
I have same front lip installed. Instead of drilling into bumper, i drilled second hole on plastic belly to install 2nd screw. so yr painted bumper stays undamaged
Did u have to screw it into the metal?
:(
@@gvaspirated yes?
@@kalam1ty we tried avoiding the metal part and drilled else where.
@@gvaspirated ok I was just wondering
Strippin them screws. lol
pray for us bro
every screw was stripped lmao
Mistakes were made x10
@@gvaspirated It happens! Came out great otherwise!
$50 lip on a 60k car..... ME ASF 😂
LMFAOOOOO! Bro count me in if it saves a buck or two!
A Model 3 Doesn't Cost 60K 😂🤡
@@jai9240 A performance model 3 absolutely does cost 60k LOL
I paid $63 after taxes
@@jai9240 hmm taxes and interest? btw even a long range now cost over 60k with taxes and interest. And that's before the recent price hike
Did you have any issues w scraping after adding the front lip ?
I’m considering a similar splitter but I also want to avoid issues.
Honestly, I'm not sure. Reach out to brice on his instagram, but he hasn't complained in any significance regarding clearance on the car.
Dude I did it the same way as you and it fell off when I was driving…. I don’t think the plastic is giving it enough drip
Hey man, it's still holding strong even after all these months and speed hits ;) Did you use m-tape?
Not into telsa but dang son
Broooo right?
So many stripped screws 😢
Ohhhh my god the stripping of the screws makes me cringe 😬
BRO LMFAOO I LITERALLY AM CRYING OF LAUGHTER XD
No lie that lip on that camaro is absolutely disgusting 😂😂🤣🤣
How to turn a Tesla into a Kia
hahah chilllllll
Alright I will chilllllll...lol
60k car fake carbon Fiber 🤦♂️
lol it be like that
Come on guys, you can’t own a performance Model 3 and lay that fake carbon all over it.
And why can’t they ? ..
Shit that's what ima do....
Does it really matter if it's fake or not. It looks great, I'm ordering mine now and besides this fricken video you could never tell if it's fake carbon or not. Jeez
@@bljohn22bj you can see in the video it’s fake and you can see in person it’s fake from even further away. It’s a $50,000 car, that’s like putting $6000 HRE’s on a $15,000 Nissan Versa. Stop Shaq’n a fool.
@@entertainment72 I guess you wont be buying the spoiler then. Ppf, in addition to others items, I'm out of money. I will cut corners when possible and wont look back.
Arggggh I can't watch this bodgery.