Nice, you appeared in my YT recommendations today. Interesting to watch you working. I am sure I can use some of your procedures to help with my own sheet metal repairs on my cars. Keep on cracking!
I'm a retired tin basher and done my share of work on cars , I'm impressed with the assortment of gear and how bloody clean that shop is lol , greetings from Manchester
Absolutely fantastic video for me as an ex MGB Owner. I rebuilt my own engine once, then bought an Ivor Searl replacement due to piston ring failure. I may have my original engine rebuilt by Grace.😅
I was removing surface rust from suspension arms and brackets and then sprayed the metal with protective paint. 3 very long days under the car. To do a car like this needs a lot of skills, determination and steel patience . I don't think i could ever do that.
Wow, I sure wish I could have given my old Miata to this guy. I had a 2000, bought mint in 2004. Loved it for a long time. Won a bunch of autocrosses. But I was young and dumb and didn't know about Fluid Film and it was my only car, year round. Rust took it from me. Watching this work is incredible. At my shop, we have a welder come in sometimes to do emergency rust "repairs." Guy spends an hour or two, loosely tacks some paper thin sheet metal over a gaping hole in the chassis and everyone acts like it's fixed. They look at me cross eyed the next time the vehicle comes in and I tell them I can't put it up on a normal lift because there's still no structure under the patch...
Nice - I have a paint cup with some thinners in it - I use a paintbrush to flow out the sealant over the welds - dip the brush in the thinner, use that to smooth the sealant after you gun it on - leaves it looking tres posh. Underseal over that - ends up real smooth. :-)
My only concern is you didn't treat the inside of the panel before you welded it. I use zinc rich primer but leave 5 mm around the weld area. Then I drown the whole thing in cavity wax.
Hi guys, new to the channel and just watching the mx5 video. The panel work is absolutely perfect and mesmerising to watch. Fab content and looking forward to watching your library 👍👍
Great to watch and nice to learn some new tips, thanks👍 If Robocop ever needed facial reconstruction and eye socket repair, I'm sure he'd give you a call! 🤖
Amazing as always.brilliant to watch.im getting much better thanks to watching you..I'm def not afraid to make my own panels now. Nowhere near your quality but getting there I think
did you happen to go to a college or take courses for auto body repair? or is it all just over time and year’s experience? you make it look easy from the beginning to end, i would like to do this kind of work on older cars that need restoration, love the idea of bringing nostalgia, a time I didn’t live in back.
Almost all the time the patch panels aren't big enough and/or they aren't available to everyone or at all, like the rear sill bulkhead panel :) so we try to show people how to fabricate things themselves, this channel isn't just about repairing cars its about showing people how to fabricate themselves, nobody would learn anything sept a bit of welding if we did that :)
@@yorkshirecarrestoration That's interesting. I know for a lot of classic cars, you can buy entire inner and outer sills for restoration. Anyway, appreciate the reply, nicely done.
I appreciate the craftmanship, on the radiator support area just wondering how cost efftive the labor to crate the patches is, I show alot of these parts to be in the 30 to 130 USD range, not sure how much you charge to fabricate but it may be cheaper to just section in the OEM parts at the factory seams, not like this is a super rare car the parts are no longer available .
We arent on youtube to advertise our services, we are on youtube to show people how they can make smaller localised patch panels themselves at a fraction of the cost of having to purchase a whole panel.
II love watching skilled people do their stuff. I wonder why the car was in such bad state in certain areas in the first place.? Was the car not properly rust protected in the construction ??
Been there and done that so I understand why you would rather not put a safety guard on your angle grinder. But I also know that a disc like that will explode in your face sooner or later
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Love this. Simple materials. Simple tools. Extraordinary results.
Thank You Jim its much appreciated :)
Simple but expensive tools lol
simple tools? I see
The skill on his patch panels is extraordinary, top notch work n better than factory. That's one lucky Mx5
Thank you very much! We try to show different methods of fabrication for the panels. Thanks for the support!
@@yorkshirecarrestoration ok
Terrific rust repair! You make it look easy but I know it takes tremendous skills.
thank you Oliver :)
Amazing workmanship and a lost art in the throw away society. Plus made in Yorkshire. Hats off
thank you David and yes we fully agree :)
Ey up! Keep up the good work pal
Fixing the headlight bracket/surround was really impressive imo. I may take my MX5 here when I decide to do the sills etc.
Thank you! We do sills and arches daily. Get us on indaltagram if you do decide to. @Yorkshire_car_restoration
Nice, you appeared in my YT recommendations today. Interesting to watch you working. I am sure I can use some of your procedures to help with my own sheet metal repairs on my cars.
Keep on cracking!
Thank you Michael. Glad we can help :)
just showed up in mine, 8 mo later.
I'm a retired tin basher and done my share of work on cars , I'm impressed with the assortment of gear and how bloody clean that shop is lol , greetings from Manchester
Haha thank you :)
Absolutely fantastic video for me as an ex MGB Owner. I rebuilt my own engine once, then bought an Ivor Searl replacement due to piston ring failure. I may have my original engine rebuilt by Grace.😅
I really like your videos, there is no BS or waffle, just straight forward Yorkshire how to do it. Much appreciated.
Thank you :) 👍
Just love watching these, even my 7 year old was mesmerised. Keep them coming
Hi Andrew :) thank you for the support, we will continue to make the videos so you can both continue to enjoy them 😁👍
This is a great video! I started restauring an old Fiat 128SE for myself as a hobby and you showed me some great skills and ideas.
Thank you Diego we are glad our videos helped :)
I was removing surface rust from suspension arms and brackets and then sprayed the metal with protective paint. 3 very long days under the car. To do a car like this needs a lot of skills, determination and steel patience . I don't think i could ever do that.
It is labour of love :)
Bloody brilliant, thanks for sharing all that you do 👏👏👏🇦🇺
Thabk you Mel, it's our pleasure :)
The work going into this Myata. It makes zero economic sense, which proves this is a labour of love.
It is indeed. The owner has an attachment to the car so wanted it getting back on thr Road.
Wow, really, you are a giant, skilled, and artist in your field. I wish you all the best
Thank you Alan :)
Nearly there then. What an amazing resurrection this has been, thanks to your awesome skill.
Thank you Bazer. It's definitely been a journey!
Great work on that rusty thing! I can almost smell cutting disc, steel and rust watching it!
Haha I definitely could :)
cool, the workmanship is very detailed and neat
thank you :)
Amazing skills to develop the pattern for the headlight surround...can't wait for the next installment...
Hi Richard, thank you there are already a few videos after that uploaded and ready to view :)
Pleasure to see you work! 😎
Thabk you Tony :)
@@yorkshirecarrestoration you kind sir are very welcome
You are very Welcome!😉
best Miata channel
Thank you very much Jack :)
Wow, I sure wish I could have given my old Miata to this guy. I had a 2000, bought mint in 2004. Loved it for a long time. Won a bunch of autocrosses. But I was young and dumb and didn't know about Fluid Film and it was my only car, year round. Rust took it from me.
Watching this work is incredible. At my shop, we have a welder come in sometimes to do emergency rust "repairs." Guy spends an hour or two, loosely tacks some paper thin sheet metal over a gaping hole in the chassis and everyone acts like it's fixed. They look at me cross eyed the next time the vehicle comes in and I tell them I can't put it up on a normal lift because there's still no structure under the patch...
We have seen repairs like that a lot, that's why we always put enough strength back so the car can easily be jacked up on the repair sections again :)
Profi working ,thank,s gut -schnell und mit Präsididation.....working in Yorkshire Car Restoration in UK !
Saludos desde Buenos Aires Argentina buen trabajo
Thank you and hello Argentina :)
I don't normally say dude and I don't normally say Superstar, but dude you are a superstar.
Haha thank you :)
hello dear..what kind of steel plate you are using ? code or grade
I bet you guys could fix up my 65 MGB in no time. Excellent work.
Hi Ron, we can usually fix anything :)
Nice - I have a paint cup with some thinners in it - I use a paintbrush to flow out the sealant over the welds - dip the brush in the thinner, use that to smooth the sealant after you gun it on - leaves it looking tres posh. Underseal over that - ends up real smooth. :-)
Thank you for the tip James :)
@@yorkshirecarrestoration nothing worse than a glove finger covered in black schmoo - hence the move to a brush. Far nicer. :-)
Quality metal fabrication car now looks superb again .
Thank you Paul :)
patchwork is clean and neat . Sincere work to Custamer
My only concern is you didn't treat the inside of the panel before you welded it. I use zinc rich primer but leave 5 mm around the weld area. Then I drown the whole thing in cavity wax.
Молодец! Классный жестянщик!
Thank you very much :)
Bloody good workmanship
Thank you Aaron :)
All the best
try pushing the gun and pointing it towards the new disc. your work is really great.
Greetings from a Hungarian welder
thank you :)
Really good job
Thank you :)
Hi guys, new to the channel and just watching the mx5 video. The panel work is absolutely perfect and mesmerising to watch. Fab content and looking forward to watching your library 👍👍
Buen trabajo colega saludo de Montevideo Uruguay Sudamérica
Very best. Congratulations...
Thanks a lot 😊
То ли молотки у него волшебные, то ли руки у мужика золотые?!😂👍👍👍💪
Haha possibly magic hammers :)
@@yorkshirecarrestoration very well! I don't speak English, unfortunteli👍😂👍. Good luck in work
Так металл только снаружи обрабатывает, а внутри нет. Считай ржавчина сразу пойдёт
headlight surround was most interesting bit--sub!
Thank you for your support :)
Brilliant! you make it look easy, well done.
Thank you! Cheers!
Just amazing skills 👌
Thank you :)
Nice and illustrative video... greetings from Lima.
Hello all the way to Lima :)
Brilliant like magic, my mx3 is just like this
Great to watch and nice to learn some new tips, thanks👍
If Robocop ever needed facial reconstruction and eye socket repair, I'm sure he'd give you a call! 🤖
haha that would be a challenge :)
This has been a really good series of vids. Fascinating to see the skill and workmanship that has gone into the repairs.
Thank you for your support :) , glad you are enjoying them :)
Ypu have some serious skills 👌 I am really enjoying this thank you Sir
Thank you John glad your enjoying the series :)
Amazing as always.brilliant to watch.im getting much better thanks to watching you..I'm def not afraid to make my own panels now.
Nowhere near your quality but getting there I think
Hi Paul , glad your learning for the vids and yes raving panels is just practice :)
god that's some good work my capri needs this type of rustoration
Thank you! We have some classics currently on the channel. An LJ80 and Datsun 260z. We also have others ready to restore.
did you happen to go to a college or take courses for auto body repair? or is it all just over time and year’s experience? you make it look easy from the beginning to end, i would like to do this kind of work on older cars that need restoration, love the idea of bringing nostalgia, a time I didn’t live in back.
Kỹ năng của các bạn thật tuyệt vời, đỉnh cao
Cam on ban :)
you do a very good job! Push the welder and weld all the way through.
Thanks 👍
Nandor and warp and blow holes every where
Congrats!!!! Nice job ever! Greetings from Brazil.
Thank you very much! and hello Brazil :)
Impresionante trabajo......
thank you Pablo :)
Absolutely brilliant!
Thank you!
Good video short but yet showing us how to form panels
thank you :) we are trying to make longer vids but we need more time :)
wow the light surround. I would of cried having to do those shapes.
Hi Nicolas, i always approch it as a challenge and i like doing them :)
Amazing skills ❤
Thank you :)
Well done, impressive.
Thank you Ena :)
Brilliant work as always 👍👍
Thank you Lee for the continuous support :)
You made that look easy.
Thank you kev. :)
A True Master Technician! Enjoyed the video!🎉
Thank you :) 👍
So good job nice 👏
Thank you! :)
Bravo ,magnifique. 👏👍👌
Great work as always I have been unable to comment on the vidoes on my normal browser for a couple of weeks Great work!
Hi Eddie , we appreciate your support :)
Amazing! 👏👏👏👏👏
Well done!
فنان وعمل راقي
Thank you :)
Hadir nyimak boss ku suksesselalu buatbossku 👍👍
Thank you :)
Good job! It was a pleasure watch you work
I'm curious if quality sill replacements are available to avoid so much fabricating.
Almost all the time the patch panels aren't big enough and/or they aren't available to everyone or at all, like the rear sill bulkhead panel :) so we try to show people how to fabricate things themselves, this channel isn't just about repairing cars its about showing people how to fabricate themselves, nobody would learn anything sept a bit of welding if we did that :)
@@yorkshirecarrestoration That's interesting. I know for a lot of classic cars, you can buy entire inner and outer sills for restoration.
Anyway, appreciate the reply, nicely done.
High quality🏆🏆🏆
Thank you :)
Super. Efforts
Thank you!
That's amazing skill
Good job 🇩🇿 Algerian
Thank you from the UK :D
Just subscribed, great channel, and loving your work.
Will binge on your previous vids and look forward to the future .
Thank you for watching :)
Bem legal essa técnica de medir e cortar as peças.
Top
Thank you :)
Good work. Hello from Belarus 🇧🇾
Super Arbeit, Respekt! 👍👍👍
Thank you very much :)
Super Arbeit weiter so 👍
nice job
thank you :)
I appreciate the craftmanship, on the radiator support area just wondering how cost efftive the labor to crate the patches is, I show alot of these parts to be in the 30 to 130 USD range, not sure how much you charge to fabricate but it may be cheaper to just section in the OEM parts at the factory seams, not like this is a super rare car the parts are no longer available .
We arent on youtube to advertise our services, we are on youtube to show people how they can make smaller localised patch panels themselves at a fraction of the cost of having to purchase a whole panel.
wow, great job done here! 👍
Thank you :)
Some people probably thought you bit off more than you can chew with this one,,,,, seems like you chew a lot :-) , great work
Thank you Dan , yes anything is possible and we do usually end up doing cars everyone else wont tackle :)
Amazing job man !
Thank you! Cheers!
II love watching skilled people do their stuff. I wonder why the car was in such bad state in certain areas in the first place.? Was the car not properly rust protected in the construction ??
thank you :) i think it spent a lot of its life at seaside town :)
Ps love the video. Very useful to see techniques.
Glad you enjoyed it!
Gives me hopes for my rusty celica lol. Awsome content.
skills are second to none. neath clean job.great video buddy
Thank you :)
I wish you can make me a small patch for my Mazda 3. I enjoy your videos
We can make just about anything :) thank you
@@yorkshirecarrestoration could you make me a patch on my 04 Mazda 3 S sedan I can get a patch panel for 80 bucks but I just need a small piece of it.
Fantastic work, but I'd have developed a drink dependency after the first few episodes.
haha :)
Nice work. Would love to see some primer here the panels are overlapping
Great job Man💪🏻
Appreciate it!
Been there and done that so I understand why you would rather not put a safety guard on your angle grinder. But I also know that a disc like that will explode in your face sooner or later
hard to use on a daily basis with them but we are trying to modify them atm so we can still get them in places :)
wow wow wow!
Thank you :)
Great work as always mx5 is coming together nicely 👌🏻
It is getting there! It's almost complete! Thanks!
Great job. Amazing skills.
But all these rust videos scared me of buying an mx5.
We only get rusty ones as that's what we do. There are still a lot of nice mx5's out there. :)
@@yorkshirecarrestoration and guess what....
I BOUGHT ONE!
Fairly clean, but we have to do some rust prevention....
Very good
Wiejski paprok , robota na sztukę nawet podkładem nie maluje
It was protected after the job as has been mentioned several time in the series.