Truck looking cool! Sure you probably have a baseball bat ! Old school we used a ball bat to clearance between tire and fender issues! Just put bat between tire and fender roll it back and forth a little at a time till u get the clearance u need! God bless you young man! U seem like a hard working dude! Keep up the great videos! Ps : Ive seen this done even with a 2 x 4 also! Good luck! 😇🫡🇺🇸
Oh dang! I’m literally broke broke right now like 100% tapped out. I’m still waiting on a paycheck that I was suppose to get by now but haven’t so I’ll have to get with you after that hits. Message me at moore_motor_sports@yahoo.com or message on instagram.com/mooremotorsportsgarage
Hey James, as you are now in the north of texas why don't meet with Randy from auto auction rebuilds in South OK. With 100k subs you shouldn't be waiting for paychecks, he is very supportive to other YT Colls and can check your settings in order to get monetized properly..
This one is a 5.0 it’s a solid engine but most likely doing a 5.3 swap on it since they make more aftermarket support for the 5.3. The 5.0 is a good engine if it’s the carb engine since they make support for that.
Hadn’t looked through all comments but have you addressed inner fenders? I’ve built several obs Chevys and found for best clearance is to cut and foldup tabs then spot sled and grind for paper thin/smooth inner fender lip!
Got some of those spindles for my s10 gotta get installed. Paid for mine tho. Got from their eBay site. Cheaper then normal site but stil good prices either way. Iv got a femder roller btw if ya wanted to come use it some time
Thanks appreciate it. This truck isn’t ready for a 2 hours trip lol it still needs the alignment and wheels are bent or something because it’s still not right yet. Front is smooth it’s the rear wheel I’m pretty sure it was bent when i got this truck and need some work still.
@@JamesDguy yeah I understand that especially driving this far and back again. Sucks about ur wheels. We don't have any stock spares or I'd tell ya come get em. Hopefully I'll be able get on the Honda this week and maybe get it right and one of these days we can get together. We're having a car show here n June for our volunteer fire depart my kids are on plus several churches have shows during the spring n stuff around here.
The whole truck needs to be taken apart and cleaned up with paint. But its a shop truck not a show truck. Some undercoat on frame will definitely dress her up.
It can be both SORTA. I will clean it up the best i can but at the end of the day it is just a shop truck. I will do what i can to get it as nice as i can though. It will be going to car shows not to win trophies but to spread the GOOD NEWS! Jesus is the good news!
Im not taking on clients paint jobs right now i have no locations to paint. The conditions have to be perfect and the inflatable paint booth isn't good enough due to weather conditions. Sorry for the inconvenience. I have a lot of Do it yourself content so people can do it themselves! That was the main reason for my content is to help people do it themselves so they don't have to pay someone like me a lot of money to do it. :) God bless you and i pray you Have a Blessed day!
8:57 that glove removal was faster than the speed of light! 😜
Truck looking cool! Sure you probably have a baseball bat ! Old school we used a ball bat to clearance between tire and fender issues! Just put bat between tire and fender roll it back and forth a little at a time till u get the clearance u need! God bless you young man! U seem like a hard working dude! Keep up the great videos! Ps : Ive seen this done even with a 2 x 4 also! Good luck! 😇🫡🇺🇸
Yeah we used that trick before a lot but don’t have any baseball bats. I can’t remember the last time I had one lol
Looking good, getting better every time. Cant wait for paint.
Thank You and you me both!!
All new shiny parts 🤩🤩🤩 build is looking cleeaaannnn!
Thank you it’s much better than when i got it!
That looks so great, love the stance!
Thanks me too
I have a brand new eastwood fenderroller on shelf for 5 years pay shipping and it yours!
Oh dang! I’m literally broke broke right now like 100% tapped out. I’m still waiting on a paycheck that I was suppose to get by now but haven’t so I’ll have to get with you after that hits. Message me at moore_motor_sports@yahoo.com or message on instagram.com/mooremotorsportsgarage
Hey James, as you are now in the north of texas why don't meet with Randy from auto auction rebuilds in South OK. With 100k subs you shouldn't be waiting for paychecks, he is very supportive to other YT Colls and can check your settings in order to get monetized properly..
Looking good brother. Keep em coming. God bless you and your family 🙏
Looks great
Good bless u and your family
Thank you 🙏🏻 God bless you and yours too!!!
Looking good
Another great video
Thank you brother hope all is well! Can’t wait for y’all to come visit sometime!
Great video. Thank u for spreading the word...what was the engine size in your truck again.?
This one is a 5.0 it’s a solid engine but most likely doing a 5.3 swap on it since they make more aftermarket support for the 5.3. The 5.0 is a good engine if it’s the carb engine since they make support for that.
OK.awesome
Did u notice any change in camber..In or out on top after spindle swap? Was an alignment needed afterwards?
Where can i buy the calipers for this rotors. I got em ordered but now my callipers wont fit
Truck looks much better...👍👍
Great video. By any change do you mind sharing the torque specs for the bottom and upper bolts ? Thanks !
Hadn’t looked through all comments but have you addressed inner fenders? I’ve built several obs Chevys and found for best clearance is to cut and foldup tabs then spot sled and grind for paper thin/smooth inner fender lip!
Great video !!
Thank you brother
Where is the video of you front spring and shock replacement. Please
Do you think grinding down the lower control arm so it doesn't rub is something that is ok if you kept the 15"s?
How are the Detroit axle brakes holding up? Thinking of picking them up for my 95 as well
im doing the same with my truck but where do i find the bearings for the new rotors it doesn't say in the video
Got some of those spindles for my s10 gotta get installed. Paid for mine tho. Got from their eBay site. Cheaper then normal site but stil good prices either way. Iv got a femder roller btw if ya wanted to come use it some time
Thanks appreciate it. This truck isn’t ready for a 2 hours trip lol it still needs the alignment and wheels are bent or something because it’s still not right yet. Front is smooth it’s the rear wheel I’m pretty sure it was bent when i got this truck and need some work still.
@@JamesDguy yeah I understand that especially driving this far and back again. Sucks about ur wheels. We don't have any stock spares or I'd tell ya come get em. Hopefully I'll be able get on the Honda this week and maybe get it right and one of these days we can get together. We're having a car show here n June for our volunteer fire depart my kids are on plus several churches have shows during the spring n stuff around here.
I usually do relief cuts on the lip and then grab my hammer and fold the lip like that.
Yeah lesson learned lol
Love the install and explanation of everything god bless you brother and beautiful truck!!!😇
What did you use to drop the rear
500 50lb bags of sand. Lol
First person to watch video at 2am lol
It’s 4am here in Texas but awesome!
@@JamesDguy california time for me
@@bugeye02707oh now I understand a little better haha. Well I’m getting to bed so have a God blessed Sunday!
Hey just got done doing a front brake job with that style rotor.
@@JamesDguy me too, and you too!!
Tint the windows..😁
Demanding much?! lol jk all things will be done in time. Lol
The whole truck needs to be taken apart and cleaned up with paint. But its a shop truck not a show truck. Some undercoat on frame will definitely dress her up.
It can be both SORTA. I will clean it up the best i can but at the end of the day it is just a shop truck. I will do what i can to get it as nice as i can though. It will be going to car shows not to win trophies but to spread the GOOD NEWS! Jesus is the good news!
@@JamesDguyamen brother.
You can clean with paint? Cool I'm gonna use it when I take a shower later. Lol
So its a 5/7 drop?
Just the watch the video dude he says it. Lol
🛻💥💫✨️💫💯❤️🔥😎
Hey boss I am a big fan can you help me with my car can I get your Gmail I want to print my car
Im not taking on clients paint jobs right now i have no locations to paint. The conditions have to be perfect and the inflatable paint booth isn't good enough due to weather conditions. Sorry for the inconvenience. I have a lot of Do it yourself content so people can do it themselves! That was the main reason for my content is to help people do it themselves so they don't have to pay someone like me a lot of money to do it. :) God bless you and i pray you Have a Blessed day!