The Nexara Harvest Prt 1
ฝัง
- เผยแพร่เมื่อ 9 ต.ค. 2022
- The thumbnail pic is to remind everyone of how far we have come with this Nexara canola this year... The excessive amounts of rain in the spring resulted us in seeding directly into the grass. Remember it takes a couple years to get the land fully reclaimed and reestablished.
For extra entertainment, polls, pictures, flash backs, Ashtyn & Chapel, and more interactive content or just to contact Mike 🙂
www.patreon.com/bePatron?u=25...
Also check our website for more information about our family farm and our new merchandise at
Www.faithhopefarms.com
![[TH] VCT Masters Shanghai Swiss Stage DAY 3 // FPX vs GEN | G2 vs TH](http://i.ytimg.com/vi/9lFnPhYhBIg/mqdefault.jpg)
Mike I thought you understand combines lol if you would you would know the key to a cleaner canola sample is slow your rotor down. You are overloading ur sieve. Since u have next to no rotor loss you can easily go too 450-500 rotor speed. And you need some wind to separate the canola from chaff at least 720 rpm
Thank you Mike for the great farming content in your videos. Lots of people have no clue as to how our food is grown and harvested. You continue to feed and educate or world. Much respect for you and your family.
Gracias por tu exposición
Good to see!
I run my feed accelerator in low all the time. A JD tech who also farmed said you will still get your crop to the rotor plenty fast and your accelerator will have far more torque for tough conditions.
Regarding the broken spindle:
Hi Mike, I do not want to worry you, but the clean break is indicating to an faitgue failure. So the part did have too many hours on it. Furthemore the area of the diameter change is a prominent place fur such an failure. I hope they have a big radius in the Area of the diameter change on the new part.
Maybe you should also check the other spindle for cracs at the same area or even make an crack spray test.
Greeting from an german engeneer!
Thanks for the in-law story!! Most can relate!
as soon as you mentioned the end call button i knew where you were going with that
Mike had some strong coffee in this one, I enjoyed it keep the videos comin!
impressive that you got a decent crop seeding directly into the grass. Good job!
Ya usually it never turns out well, for us anyways
Agreed, I have an issue also... it's hard to be humble when I'm perfect in everyway.
😎
Good that your farming with your in laws
You have some of the best… if not the best farming videos on TH-cam I hope you realize that Mike
Mike, the chaff is a good insulation,it always ends up on the walls of the bin and helps with condensation.
Closing the sieve is a mistake, open them up and work with the fan speed , done this for 40 years and it works just fine .
Agree 100% biggest mistake made close sieves open and more air.
Great to see the canola coming in well 👌💪
Perfect Monday morning Mike Mitchell video 👌
I love autosteer ..but for combining swaths I prefer to drive myself
🎵In the early morning rain,🎵
With a dollar in my hand,
With a achin' in my heart,
And my pocket full of sand....
Woo-hoo awesome video thanks for sharing 👍
Ya totally agree on the year or two to get into full production. Cuz we had a bit of grassland on one of our fields last year because it was dry enough to seed from the drought. So we did the same thing as you and direct seeded wheat into grass there and it was some of our poorest yielding stuff which we didn’t have huge expectations on it anyways. But this year we had quite a wet year and got some canola in there and it was some of our best canola (probably averaged around 55 in that 15-20 acres) 😂 so ya it definitely takes a year.
G'day Mike, spindles rarely just snap off square (transversly) across the axis, bit hard to tell as the images in the vid were not in focus but I suspect either a reverse bending fatigue with a seperate crack inetiating at the front and back of the spindle at a stress riser and propagating into the centre or a torsional shear fracture which would require the bearings in the roller to seize and stop it from rotating instantaniously. Either way understanding the failure mode allows you to get pro active with maintenance and inspection so your machinery lets you down less when you need it. 👍
I think you should open your sieve and increase your fan with your sieves open more you can handle more wind. that little bit of chaff does not account for very much docage..
That is cool you can map the joy stick for different attachments.
GREAT VIDEO!! GOD BLESS U!! 💯👍👍👍👍👍👍👍👍👍
Thank you sir
I hope you guys video the dealer throwing pans. Would love to see what those machines can do
love the videos keep them coming
hope the rest of your harvest goes without another “quirks”😄
Funny, My wife says I have Quirks too. A Lot of Quirks 😁
Hey Mike, great content love your videos. Maybe a future video on how the weather affects your operation and how you depend on reliable forecasts and how you get that info would be interesting. Adios amigo
Morning
Mike, what chaffer are you running in those X9's? In Australia we have found the flat tooth comb chaffer really improves the sample in canola.
There are 2 ways companies of GPS configure north south guidance lines. JD always used parallel lines which didn't follow the curvature of the Earth.
Everyone else in the GPS world used curvature GPS lines.
So you're swather was recorded with one style and your combine is running the other.
That is why you are creeping off.
Both the swather and the combine were using John Deere computers to do the guidance so they should be the same. But ultimately you're correct. John Deere traditionally used "BeeLine" guidance lines. Everyone else uses rectilinear grid lines. If I recall correctly the BeeLines are the curved lines (not parallel) in the north/south direction. Each north/south line points at and converges on the north pole. Whereas rectilinear lines are parallel, which means the farther east or west you are from the starting line they no longer point due north anymore. Rectilinear turns out to be the most useful for farming and can work in northern latitudes with less error. John Deere guidance can let you create guidance lines of either type these days so I suspect the swather is defaulting to one and the combine defaulting to the other. Note that this deviation will be worse the farther north you are. Where I farm I can hardly notice it over a couple of miles in the north/south direction.
I remember there was a time when AutoFarm (later bought by AgLeader) used a rectilinear grid, but it based on UTM I think, and so depending on how far you were from the base meridian, 0 degrees would be quite far off of true north. I could tell that my neighbors rows were a couple degrees rotated from my John Deere (BeeLine) rows. A year or two later this was no longer the case so I assume AutoFarm updated the firmware to adjust for the offset. I do not know if they use UTM and adjust the grid rotation, or use some other similar algorithm. AgOpenGPS uses UTM but the rotation of the grid is adjusted with a heading offset at the beginning of every new field such that 0 degrees on the first pass is really true north.
hi mike
Were you able to have somewhat of a relaxing "Birthday / Thanksgiving Meal" in the field this weekend ?
Yes Mike I have had that same issue in my car so I have gotten to not do anything and hoping the other person hangs so I don't have to have that issue.
I understand that it is important to see how in this time there has been great progress in working the fields, but it is equally important to know what is harvested in the fields, because we then eat those products!
😂 For some time I had a problem with my smartphone that prevented me from ending calls myself. I always had to wait till the other person would hang up.
Would have been quite an awkward time if you and me ever had a call 😅
Magnifique matériel et la moissonneuse batteuse x9 1000 et l
Luckily the software issue with the "Redial Feature" isn't programmed into the seat sensor because if that was the situation then the frustration level would really reach a new high 🤣🤬😂
Happy Birthday a couple days late
My X9 loves you, too. 😂
Thirty bushels an acre on no till ground is pretty impressive given the dry year. Will you do more no till?
They are far from a drought in that area.
Bel video. Bravo. Bei mezzi.
👍👍👋👋💪💪🚜🔝🇮🇹
I completely understand the needing the swath to be centered thing. We run ivt tractors and I always have to have my speed set to an even mph. 🙄
Right?! 🤷♂️😆
Listening to music is the same, always sounds better at an even volume.
Hi Mike
What / which header do you pick up those rows with?
Is this also a header that you use with hay or grass rows Nice video
Not for hay, For grass seed, yes. Haven't heard that Mike has grown grass for seed but some farmers do.
@@wssides No sir i miss that part
How many acres do you have on your north farm?
Mike, just use the end call button on the armrest. No more redial. Do you use an android? If so do the new Deere screens support android auto? I use Iphone so i just use car play in the tractor and combine. Yes, case fans its 2022. You're combine or tractor should have as much tech as your truck.
Oh Mike Mike Mike Mike! Simple simple simple simple. I'm the biggest stickler when it comes to loss and productivity. Please look at the bushel plus product typically it takes me a lot of "kill stahls" and hands and knees to get all of my combines to an acceptable loss and through put. But this year I bought a bushel plus system and wow there is no comparison on how my machines productivity and losses are and I did it in honestly less than 30 mins per machine. I am not a dealer or a spokesperson for them just a farmer in North east indiana who loves products that make me money! No need for a dealer do it do it yourself and better! I will tell you our losses running 50' macdon flex drapers in soybeans is less than .03 bushel at an average of 4.8mph
Those sure are small swaths for 40’
Looks like typical nexera 10-15 less than other normal canola
Mike do you get college credit for learning all the controls on you John Deere combine. Great videos.
Mike, didn't you have a button on your armrest to end a call ;)
How many litres per acre of glyphosate did u use to kill the grass? Thanks
Probably 2L an acre, thats what we always use for grass and hay fields
🏆🏆🏆👍🇺🇲🙏
Great beautiful country 🤗
Thank you for sharing.
Where was ADIOS AMIGOS??
Are you going to bring your other x9 up to help
Couldn't you afford to install the BUSHEL PLUS HARVEST LOSS SYSTEM?
We all fight our demons everyday
1:38 your just missing rgb lights and a 4090 😂😂😂😂
What is the rethresh monitor saying? It's become more of a science during any time of the day speed fan or slow it down.
Looks like that X9 can eat eat some product.
I highly doubt that dinky lil swath will over load the shoe. Open up the sieve and turn up the wind imo
You can't hang up with the phone button on the console our tractors have a phone button one talking and one to hang up
Just make a new AB line. Drop A at the beginning of the swath, B at the end and you are good to go. No need to play with the nudge and re center all the time. 🤷♂
Noice
Mike. You have an issue. I can admit it. Thanks.
will you ever take over the in-laws ground someday when they retire?
The in laws have sons that are taking over.
so 1 bushel loss in wheat in a 12 hr day would be about 324kg?
If he does 200 acres would be 200 bu. X60 lbs /bu =12000lbs division 2204 =5.44 Tonn ou5440 kg
It's not uncommon to help out your extended family when your farms are reasonably close together. My dad and I farmed 10 miles from my aunt and uncle. We helped each other out all the time, especially when my aunt and uncle were digging sugarbeets.
Making "International" calls from a John Deere? Sounds like a real software glitch. ;)
Getting pretty bad you got to use auto steer for picking up windrows come on Mike
Hello from Israel🤟🤟 i see that my mother in law came to visit you guys. I just saw her ride on the x9 ladder.
😂
Why don’t they make car or an SUV with that kind of headroom
Funny how jd completely curbed the focus to losses and fuel consumption and combine advisors now ……… when they had the s series it was like don’t pay attention to anything.
Why do not your farm have cattle or a cattle station Mike?
Because that would require him to do physical work in all weather conditions instead of sitting in a climate controlled cab pushing buttons and adjusting the massage settings on his leather seat.
@@clearskiesranch1362 yeah couse i think it would work if Mike had cattle and to be a cow boy but no no no massage is mutch tuffer and its for the cool and strong guys🤣🤣 i have cattle in real life so i know it is but maby not in canada and in your hard winters🥶
Just make a new AB😅 seems like they are only able to drive on 90°and 0° in North America
third!
We have in Algeria a hectare of wheat is 50 quintals, is this comfortable for you 🥺
Is this what we call rapeseed in the UK
Yes. The government didn't like that other word anymore. Must be politically correct you know.
Mike
your videos are always good, but you talk mainly about today's mechanisation of agriculture which is very interesting, but there are just as many important things you never talk about, the quality of the products, e.g. GMO or not, how many residues they contain, mycotoxins, heavy metals, in short you only show how the product is obtained but you never talk about the goodness of the product!
You probably need to watch how it’s made
Can you just let them hang up and you not press anything
I do not believe in or use Bluetooth for phones. More of a pain than worth it. And I am always in a vehicle.
You need a camera man 😉 then you could keep doing most things without having to stop