Should have quit sooner! 🤦🏻♂️
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2022
- So I knew I should have quit sooner! 🤦🏻♂️ I guess this is the first time we plugged the "feed accelerater" and yes it was in high speed which means it can go longer without plugging and takes more to plug it, but when it does plug tho, it's really plugged! 😆
Turns out it wasn't that bad, but it did trigger my PTSD from last year 😳😆
For extra entertainment, polls, pictures, flash backs, Ashtyn & Chapel, and more interactive content or just to contact Mike 🙂
www.patreon.com/bePatron?u=25...
Also check our website for more information about our family farm and our new merchandise at
Www.faithhopefarms.com
Ha feed accelorator fun. The best feed acxelorator plug we had this year was a turtle about the size of a dinner plate. Dont know why hhe crawled into the feeder house over night for a nap but he plugged that accelarator. Plus he survived and is still alive today with a cracked shell!
Thanks for the video - one of the best farming channels on You Tube
You mean the best😂
Mike I love to see your TH-cam channel growing I was here in the beginning and then I stopped for about a year but now I’m back and the quality of your videos has really imporoved 👌
I agree 100%. I think I found this channel when it had less than 25K subs.
Great stuff and very proud of y'all 😀
fun fact.. in 6 years of running claas machines ive never picked straw out of them.. just drop the concaves and put it in low range and hit it a few times.. always goes through.. lol plugging front and back beaters on a john deere is a fading memory
I certainly hear more joy & less frustration in your voice compared to last years harvest.
Plugging a combine. Thanks for the reminder.
Well on the bright side you got the rock trap emptied! Stay safe.
I know of an old International combine parked in the grove on an Iowa farm simply because the straw walkers are plugged so tight with soybean straw you can't wiggle a stem loose.
On the S series and prior you normally can switch the feed accelerator belt to low speed, leave the tensioner loose, then with the separator running at idle put tension on the belt and be able to work it through. Or if that doesn’t work have a big enough socket or wrench to turn the beater backwards.
really never could do that on the 9770s
Mike if you plug it feed accelerater open the rock trap lift your header all the way up and reverse the header and most should come out just don’t stall the combine when starting up the rotor!
does the feed accelerater on the x9s reverse now
@@jenniferloveridge5494 I mean they do on all the s series just reverse the front of the header and it turns with it.!
The original yellow 10. X9’s have reversible feeder house and reversible feed accelerator and reversible feed roll.
Hang in there Buddy we love you! God Bless you and your Family and Team! ❤🖖🏼
Michael Bloomberg would have had the combine cleared in 30 seconds because you know farming is easy!
Great video Mike
Nice looking canola crop Mike
You know you totally jinxed yourself in the last video, when you said you hadn’t plugged it yet.
😆🤦🏻♂️
@@mikemitchell2554 Good job Mike.
Should of kept your mouth shut Mike 😂😂😂🤣🤣🤣🤦🤦.
🤣😅😂😅🤣
Mike, it sure was nice to meet you and take your order at DQ in Fort Qu'appelle. Hope to see you again some day .
Thankyou Kathy! Likewise 🙂
Also make sure you feed excelerator is tight.
Magnifique vidéo
On straw walker combines plugging the inside of the walkers with rye or barley awns is a pig of a plug.
Just a thought but would it have been quicker to unplug if you dropped the belly pan and the rock trap?
A hooked carpet knife would really be worth a try.
When you plug accelerator alone at night in field: take tension off belt: start up separator and reverse feeder house: pull a bit of material through rock trap: tension up belt and start separator with rock trap open.
Ask me how I know. Lol.
It’s called combining swathed L233P in tough conditions. Never again!!!!
I have been there!!!! No Mercy and ONLY one way to get it corrected..... Get on your knees and get into it.....
I thumbs upped your video only because feel sorry for you having land down south
I admit that I have never used a laser/IR temperature gun but if they work as advertised wouldn't one be handy to measure bearing temperatures when moving heavy farm equip on the road and, for that matter in the fields?
Never ever give up
@Mike Mitchell. Buy a haybail hook and keep it in the combine... it'll save your fingers! 🍻
👍👍
You hear the machine clunking as the heavy load was being processed.
Morning
Disadvantage of theses modern cabs you don't hear the problem soon enough in lot of cases. Should have or would have sooner
You say I left too early… I say I left at the right time 😅
😆😆😆
You said in another video you haveade 250 hours this year with this combine, but more or less how many acres do you have harvest in this time?
I spent 10 of the worst hours of my life one time unplugging the back of my 9770 in soybeans. It was the worst day ever. Piece by piece in a back of a tiny space and the medical and government workers make bank doing nothing... Just is not right and farm prices should be 2 -4 times higher and we can not do anything about it... We take what they pay us... beyond crazy
Boy considering it was a known problem on the s series one would think they woulda designed a beefer belt for feed acceleration.
Unless that’s meant to be a fail safe from forcing the slug in the rotors 🤔 can we give Deere that benefit of the doubt?
Mike, you talk about safety first but there are 3 folks under the header and feeder house with no cylinder lock in place. And the combine is running. I never trusted anything mechanical or electrical systems to act the way they should when I was on the farm. I learned with PTO shafts to just shut the tractor off and I never had to worry about getting pants or anything else caught and becoming one legged or worse. Starters are cheap in my estimation.
I do believe on that new JD there is not a cylinder lock but a switch that you activate on the side of the feederhouse that locks out the cylinders.
Was it fun for you? Was for me. Good stuff
Drop the concave feeder drum raise
Does it have the 3 inch nut like the s series. We made a big wreck for the 9870 and 690 s
Did you guys secure those hydralic rams ? People get crush and killed around combines you know, all because you are in a hurry. Safety first man, too late when a ram lets go.
lol i bet you wish you had a reverser like the case do and you can unplug them on top of the feeder house to
Hey mike sorry if it's a dumb question but whats the difference between normal harvesting and swathing then picking
Normal harvest means putting the combine through standing crop, whereas here he cut the crop with a swather, and now is combining the swaths after they have dried down.
@@ke6gwf yeah i got that figured but what difference does it make
@@ke6gwf isn't it less fuel efficient that way
@@blurd3xgaming-932 I guess you didn't watch any of his swathing videos where he explains it in detail lol
Basically a crop has to be dead and dry before you can combine it, but an entire field doesn't dry out at the same time, or it may be taking too long in a wetter field.
If you wait until the entire field is dry, the parts that dried first will have gotten too dry and the seeds will have already fallen out of the pods onto the ground, plus, it might snow before it's all dry.
So they either have to spray the field to force everything to die and dry quickly, or you swath it and let it dry that way.
Swathing works faster in cold weather than the chemical sprays, and it doesn't require driving through the crop with a sprayer, or hiring a plane to spray, and it works faster when it's getting cold, so it's the best option for situations like this.
He didn't swath everything, the idea was to swath enough to keep him combining until the unswathed fields are dry enough to combine directly.
You really need to talk to Ron. 😂
LOL I have done a little bit of combining in my time fortunately I have never plugged up my combine came close so many of time because I'm not spending 2 hours unplugging a combine and get that dirt all over me LOL just saying.
Watch ZK MasterTech channel to see a seat repair for your combine
If this was your only main issue besides the flex Draper, I’d say Deere has some things figured out. Cuz on those ideals it was problems after problems is seemed.
Mike 😬😭🇮🇹
Same shit since 9650. Sts just a little bigger.
I’m kind of curious why no tools when harvesting as stuff does breakdown
does mike have so many subcribers and views because he has big gear? or do we all just like him talking ?
No reversey? 😂
A million dollar combine and no reverser What the hell When John Deere copied N H why dint they copy the reverser too
Mike how many hours do you spend in a combine in one season?
500+
Should care a saws all to cut the stocks.
Mike, in what country do most of your subscribers live.
When you subscribe I don’t think it says where you’re from
Guessing most are on the north american continent
Haven't you got a box of matches
Hate to tell ya, but they are end rows, not headlands .
Can’t you just put the video in reverse and it will unplug itself?
Excess hair must be removed
Where are all your other combines? You appear to be all alone.
Mike you shouldv gotten your 2nd X9 out there. Ud be long done
One can speculate that you are really getting tired and want harvest to come to an end as this video is shorter than normal.
We will take any length of video you have the time to produce.
My hearing is telling me you should stop
This video was for me wasn't it!?!?!? No third person talk or description whatsoever
thats what you get with john deere👎👎👎
Isn’t it amazing any other combine NEVER plugs just j.d must be a lot of stupid farmers out there
I d 10 t
Why did it look like a mirror above y'alls head when you was unplugging it and which one of them guys was Ashton's brother
The mirror your asking about is actually a shinny flat pan metal oil cooler I believe
You know you have spent TOO LONG unplugging if you have to advance the video speed to "1000 x Speed" 😂⏰📹📸📽🕰🤣
Definitely less time unplugging the X9 compared to the Fendt Ideal combines of previous years