How to Replace Crankshaft in 07-17 GMC Acadia
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2024
- Stuff I used in today’s video…
Crankshaft position sensor: amzn.to/35qLvLA
Milwaukee Ratchet: amzn.to/2Fzf839
Regular Ratchet: amzn.to/2FxYsZO
Milwukee Impact: amzn.to/2X5c5W2
Socket Set: amzn.to/2IOTERA
Socket Extension: amzn.to/2XxCIaI
Floor Jack: amzn.to/2LmGM7d
Jack Stands: amzn.to/2XwcDbX
Wheel Chock: amzn.to/2J6Sjog
In today's video I'm showing you how to replace the crackshaft position sensor in a 2011 GMC Acadia. This tutorial works on model years 2007-2017. this will usually cause a crank no start condition and you may think it's a fuel pump but in this situation it was a crankshaft position sensor or crank sensor
That's probably the easiest crankshaft replacment I've ever seen
yeah...misleading title.i thought we were gonna see a crankshaft replacement.not a crankshaft sensor replacement.
No joke.
Everything like you said, bro! 👏 Only thing I’d add related to my specific issue: my starter would attempt but engine would not turn over. If it did, it would last about 2 seconds before sputtering out. Sprayed starter fluid into intake and that fired it up. Before the sensor replacement, I did the starter fluid and it would sputter out also. Hope this helps someone in the future!!! Made my day!!!
I instantly don't want to take you seriously because you called it an "Arcadia" 🙄
Best explanation. Thank you kind sir. You explained better than me
Thank you your video was very informative and it only took me 30 minutes. Thanks for your help.
Title should be “How to replace crankshaft position sensor”
man its amazing! he replaced the whole lower end in 2 mins and 17 seconds xD
I know this is a old video but did changing the crank sensor fix the p0017 code?
It's crank position sensor, not the entire crankshaft
Hi and thanks for your helpful video,
I have an acadia 2008 slt and I getting codes p0330 on high alert and p0330 low alert can you please tell me where to find p0330 knock sensor 2 bank 2,
Please? I'm confused some people said under the engine next to the starter and on top by the fuse box and relay by the driver side windshield..
I had two mechanics replaced but the herror keeps coming,,
Or can you upload a picture of the location please?
I need to check and see if they really replaced but I didn't know wich one is it,
Thanks.
what was the code?
My 09 Acadia has a bracket attached to the transmission right in front of the bottom bolt on the heat shield. Is it ok to remove this bracket? Thank you.
Awesome very helpful video and saved a lot of money no mechanic needed
Bro thank you 🙏 🙏
I did it
Love you Brother great job
Anybody else notice he chalked the rear wheels in front of the rear wheels instead of behind them where you are supposed to? Smh
Yeah the car is facing the street on an rear incline though. Prob best to do both sides in that situation.
Ez money, what did you charge?
How to put spark plugs into a 2003 GMC invoy
Crankshaft Position "SENSOR". I was like WTH is this?
Was that the 4 cyl or V6? Looked like a 4 to me but not sure
There is only a 6 cylinder for that model
What the engine code
Could this be bad without any codes I have a bad shutter while driving
On the Lamda Platform (Traverse, Acadia, Enclave), shutter while under load or going slowly up a hill is most likely the torque converter on the transmission. Another symptom, while driving on the flat, is the RPMs bobbing up and down and surging. According to my transmission guy, the torque converter is a common problem on these vehicles. I replaced spark plugs and coil packs, but my problem wasn't solved until I replaced the torque converter.
Thanks !!!!
This is the same design for a 2011 Cadillac SRX . I only know that because I assisted my sister with the replacement on her vehicle.
I appreciate this video.
Might want to edit the title and add the words crank shaft position sensor
Is the crankshaft sensor and camshaft sensor the same?
Nope camshaft is in the front of the engine there’s 4 total
@@isaacthesweat1449 Which is on the passenger side of the car and very difficult to get to.Bad design GM. 😡
@@Silverado21 True and fck Acadia. I like Gmc Yukon 👍
@@user-su8xv8lr4s nnaaaaaa
@@dannyguz1258 yeaaaaaaa
Do you know the codes related to this issue?
p0017
What was the code
p0017
Yeah so explain the relearn procedure if it's so easy...
I'm #666 👍up...😅
You have bad timing chains a new sensor will not fix it
Could be and could be not!
What the freaking code lol
P0017
Arcadia lolol
So?
Wrong title and didn't include error code. Dislike