How to replace crank sensor on 2012 GMC ACADIA P0016 crank sensor

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ก.ย. 2024
  • Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
    RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
    #gmcacadiacranksensor #cranksensor #gmccranksensor #gmcacadiastalled #stalled #carstalled #p0016 #p0016cranksensor #howtorepalcecranksensorongmcacadia #gmcstalledp0016 #gmc #gmc #bank1 #knock

ความคิดเห็น • 15

  • @shawnward4105
    @shawnward4105 5 หลายเดือนก่อน +3

    Do you have to reset the codes in order for it to start?

  • @Motivationalbankz
    @Motivationalbankz 2 หลายเดือนก่อน +1

    What symptoms can cause that .. can it be a rattle when you first start the car then it goes away after a few seconds

    • @RBTheMechanic
      @RBTheMechanic  2 หลายเดือนก่อน

      I would need to heat it but could be timing chain tensnor

  • @senorslick8393
    @senorslick8393 8 หลายเดือนก่อน +2

    Did this fix the problem ? I also have 2012 Acadia - sometime it starts - sometimes it does not. It has stalled a couple times and wouldn’t restart until later. I have some of these same codes - Fuel pump request illumination and TCM request illumination. However no exact sensor codes. Any help is appreciated 🙏🏽

    • @RBTheMechanic
      @RBTheMechanic  8 หลายเดือนก่อน +2

      Yes this was the issue also this car has issue with fuel pump moduel it would die intermittently

  • @eugski8498
    @eugski8498 2 หลายเดือนก่อน +1

    Problems here Hi no Ancwer ... And I saw it, it's not like what you see on TH-cam. You have to dig the pipe and collectors to get to the sensor and it's on the left and you can't see it on the right. There are many descriptions of the task, but only one described it on TH-cam and showed that he had uninstalled pipe exost and collectory. It's a bit low if you don't have a good lift

    • @RBTheMechanic
      @RBTheMechanic  2 หลายเดือนก่อน

      What year make model u have awd?

  • @eugski8498
    @eugski8498 3 หลายเดือนก่อน +1

    2012 Acadia Denali ok, but I think it's somewhere else and I need to remove the pipe from the exost system??? wow // but even if you don't see him there, where could he be??

    • @RBTheMechanic
      @RBTheMechanic  3 หลายเดือนก่อน

      I have to check that one if it’s 4wd then it like back hidden

  • @musicfashionstyle9269
    @musicfashionstyle9269 10 หลายเดือนก่อน +1

    What's does that help in the car.

  • @ابوسامر-ط1ي
    @ابوسامر-ط1ي 6 หลายเดือนก่อน +1

    هذا الكود هو اختلاف او خطأ في وقت الانفجار.وليس عطل في حساس كرانك...

    • @RBTheMechanic
      @RBTheMechanic  6 หลายเดือนก่อน

      Sorry bro idk what u said

  • @eugski8498
    @eugski8498 3 หลายเดือนก่อน +1

    Rool is avoid any mechanicks