2011 GMC ACADIA ,NO CRANK, NO START
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- FUEL GAUGE INOP, TRACTION CONTROL OFF, DUE TO NO COMUNICATION FROM PCM,TRANS CONTROL MODULE,ABS MODULE,THE SOLUTION IS REPLACE THE ABS HARNESS CONNECTOR ,WHEN REMOVE IT ,IT CRACK CAUSING BAD CONNECTION WHEN CONNECT IT BACK ,JUST TRANSFER WIRE BY WIRE TO THE NEW CONNECTOR.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
Hit the nail on the head. Just R&R'd my subframe to swap trans and no start. Thought I'd plugged in firmly to the ABS module only to find out both plastic pins had broken in the connector, stopping me from inserting completely. Thank you!
My friend you are a life saver! I’m currently in Puerto Peñasco Mexico on vacation with my family. My car had this exact issue. We were thinking starter but saw your video before we went into town to buy parts. I jiggled that harness and the car started so thank you!
Its nice to read this type of comments,and nice to be at Puerto Peñasco, go to San Carlos if you can. Enjoy your Vacations.
The poor car just wanted to stay in beautiful Mexico and you wouldn't let it. 😢
@@cjuanchy would this cause a vehicle to stall while driving
@@hilariousJSmith yes it is, remember that it cause to loose communication between modules
After a few hours of checking and rechecking wires and fuse box and techm and security system your video solved the problem straight away. Thank you so much!
MIL GRACIAS POR LA LLAMADA... Tu asesoría me fue de mucha utilidad, la verdad hoy en día cuesta encontrar a alguien que te ayude de forma honesta y desinteresada, este canal es de mucha ayuda para bastantes personas que al igual que yo han requerido de un buen Técnico Automotriz como tú, que lo más curioso es que haz ayudado a muchos (desde un teléfono) sin necesidad de que lleven su auto a una agencia o a un taller donde muchas veces sólo te estafan y no solucionan el problema....Éxitos y Saludos cordiales Juan
Gracias por tú comentario,es para mi una gran satisfaccion poder servir a personas como tú y otras que aprecian mi esfuerzo por darles una solución a sus fallas en sus vehiculos.
Tengo problema mi acadia 09 no enciende solo da start pero no se mantiene encendida los mecánicos me dicen cambiar motor pero no confío en new Orleans les sale más fácil a ellos cambiar motor y pueda q este bueno
@@itzdragonlover1800 disculpa no habia visto tu comentario espero ya se haya solucionado el problema de tu vehiculo y puedas compartir cual fue la falla ,puede ser de mucha utilidad para más personas.
Quiero agradecer la atención prestada al Señor Juan . A mis preguntas y hacerles saber que gracias a su ayuda y consejos pude solucionar mi problema siendo que ya había llevado la camioneta al eléctrico sin tener una solución
Fue lo mismo que le encontró el mecánico del video? Que le hiciste podrías compartirlo
I been having same problem with my 2011 Acadia thanks for the help really thank you
Did u fix the problem
Que bueno que existen jente asi, yo le estuve ayudando a mi hermana a revisar su 07 Acadia y padecia de los mismos simtomas y honestamente gracias a este video que hice exactamente lo que el estaba haciendo con esa y parecio q eran los cables de un lado de donde esta el (air filter box) muchisimas gracias x el video fue de una gran ayuda!
Gracias por tu comentario.
Solo moriste los cables o algo así, o cual fue el procedimiento?
Great video this is exactly the problem I'm having with my 2008 gmc acadia no crank and no start was driving and the car went right out on me and would not start back up after I will try this next
Gracias carnalitos por ser tan humildes y professionales que DIOS los siga bendisiendo con salud para ustedes y su familia gracias
Lino Lozano Gracias por el apoyo.
Lino Lozano Ola amigo tengo el mismo problema con mi 2008 enclave
@@joseponce9518 si hace lo mismo que en el video ,solo cambiale el connector de plastico del Modulo ABS,no se en que parte te encuentres.
José Ponce Ola carnalito estas ai para hablar
Exact same issue. You saved my ass sir thank you. Very informative.
Thank you so much for this video. I did a full timing chains job on this 2013 Acadia and i had the same issue. No communication with ECM/ TCM/ ABS. I unplugged and plugged back many connectors to no avail. When i came looking for ideas, i found you video and that connector was simply not pushed in fully. Once i corrected it, the vehicle fired right up. Thanks again brother.
Im glad you were able to find it, Thank you for watching.
Mr. Juan
Su video fue muy util para mi. You save me from calling the tow truck and getting ripped off from the dealer. I also have a 2011 Acadia. Mi problema era el mismo. It wouldn't start or crank. Just a tick sound. I checked all connectors just like u described in ur video. (The ABS module/ Engine Module/ and all other connectors that I thought it could help) I cleaned all of them with QD Electronic Cleaner and boom! Car has been starting ever since. Muchas gracias don Juan. Ojala siga poniendo videos de este carro. Por medio de TH-cam ya le e compuesto las brekas y cambio de aceite. Cosas menores. Pero cuando se trata de cosas grandes.. prefiero llevarlo al mecanico. Al menos que yo pueda.. yo lo haria.
Un gusto saber que le haya servido mi video,muchas gracias por su comentario,cualquier cosa para servirle,Im glad that my video was helpful ,if anything Im here to try to help you.Thanks for your comment
@@cjuanchy buenas tardes tengo en mismo problema y ya moví los arnés pero no prende q más puede ser el problema le agradezco su ayuda d antemano
Alfredo Rodriguez , necesito saber que hace exactamente , da marcha? O si prefieres enviame un número a donfe te pueda yo llamar
@@cjuanchy no da marcha
@@alfredorodriguez245 alfredo encontraste el problema?
Great job of actually diagnosing the source of the problem. This would be very difficult for an amateur - or someone without access to the wiring diagrams. Thank you for taking the time to post this video for all to see since many, many Lambda owners are going to be dealing with this (as well as several other) engineering flaw(s) eventually...
Same my problem now, check all fuses and relays on fuse box,all good, change starter because it's burn,then wirings harness all good rotation and condition,but still won't work, but today I watch your videos, this helps me a lot to check all connection electrical.thank you.
Thanks for coment
Nice work Bro. I get tired of the rip off hacks out calling themselves technicians. Thanks
Is nice to read that type of comments Manny,Its a Pleasure to serve you people
Sadly here in my town I don’t know of a mechanic that isn’t a crook. And the only honest one we had retired!! I have been doing a lot of repairs myself to save me big bucks. The last time I had my car in the mechanic said I needed new struts on the front and rear. What he didn’t realize was that I changed them myself no more than a year and a half ago! He got busted trying to rip me off. I won’t ever go back. Sadly his dad used to be honest. Guess he didn’t teach his son that trait.
Got one in the shop now with the same problem. Ours came in with the traction and abs lights on, tech removed the air box to test continuity and then the car wouldnt start. No communication with the pcm, code co121 coo73 hatch doesn’t work and no box around the park indicator. If any of the communication lines go open these suv’s leave you stranded or the technician frustrated. Chevy Impala uses the same setup. One Christmas light goes out the whole tree goes dark that’s how these data bus systems work. The hard part is getting the customer to understand the time involved in finding the loose connection somewhere whether under the passenger seat or at the EBCM. Good video pointing out a common issue.
Thanks for the comment,It is hard to make customers to understand that when its electrical problems we never know how long is going to be to solve the nitemare,make sure your connector to de ABS MODULE makes good connection on my case it was the problem,I replaced just the plastic part, transfer wire by wire and problem solved,Good luck fixing yours.
You ever figure out the issue? Same thing for me on a 2010 gmc acadia. Traction control light on, no[] around park on dash and wouldnt crank. Disconnected the negative battery and it signifies its in park and will start.
You just helped me on the side of the road. It worked on my 13 Acadia
Thanks for your comment
Did your car shut off in the middle of the road?
@@keshia8225mines did I literally just came off the freeway went to turn and the car had cut off
exact same issue. thank you for the video. you saved me from pulling the starter.
I pulled the starter, motor mount and bracket, installed new starter and bracket and mount. Same thing, no crank, no start, defenantly gonna check this tomorrow.
Muchas gracias por compartir su experiencia reconocidamente muy tecnica! y facil de entender.
Gracias por su comentario Gabriel.
Love this guy the best mechanic ever
U saved me
Thanks.
cjuanchy I have a traction control problem with this 2013 GMC Arcadia it keeps going off and coming on and I changed the brake position system sensor up under the dash didn’t work can u give me some tips of wat u think it is...... If u have to I will give u my
Number
give
Appreciate it brother its worked for me 👍💐💐
Glad to hear that
Nice work. The customer will be happy. No more wondering if the car is going to fail or not when driving and hit a pothole. Thank you for the great video.
Muchas gracias amigo me fue muy util este video . mismo problema acadia 2012 . solo movi el cable e iso como un clik y ya enciende bien . estoy feliz que me isiste ahorrar dinero .. Muchas gracias por compartir tu sabiduria Dios te bendiga. Saludos de Durango Mexico
Gracias a uds por visitar el canal, me da gusto que los videos les sirva
@@cjuanchy nissan altima 2006 6 cil. Tarda en ensender solo da marcha y cuando prende al meter el cambio lo mete muy agresivo da el tiron bien fuerte para delante y en reversa , pero para delante si da el tiron agresivo y al avanzar esta todo devil sin fuerza le acelero bastante y avanza muy poco...el escaner me marca sensor de arbol de levas banco 1... El caso es que ase 7 meses me isoblo mismo . fui con un electrico y me dijo que era la transmisión que el me lo arreglaba pero era trabajo caro y lo arregle 7mil pesos me cobro como 340 dolares .. El electricio me dio 2 meses de garantia y todo muy bien hasta el dia de hoy volvio a fallar igual con los mismos sintomas.. Alguna recomendacion amigo que me pueda dar e escuchado q esas transmisiones son muy defectuosas lo que pasa que tengo muchos años con este carrito lo traje de Wisconsin ase 10 años tiene ya 280000 millas . creo tener 2 obciones ir de vuelta con el electrico y que me diga si asi ba a estar fallando porq no me conviene es mucho dinero para q lo este asiendo muy rapido y la otra seria ir a un yonke y buscar la misma transmision..... Si me pudiera alludar con alguna recomendacion se agredeseria muchisimo hermano
Circuito del sensor A de posicion de arbol de levas (banco 2)..... Lo acabo de escanear y eso me marca oiga
Me puedes enviar un numero a donde te pueda llamar para preguntarte mas sobre tu camioneta? A mi correo penita33@hotmail.com
@@cjuanchy listo enviado amigo
I have the same issue. Just replaced those intricate timing chains on a 2009 Traverse 3.6. What a nightmare. I dropped the subframe, easier than trying to do in frame. Now it won't start. Doing same thing this Acadia is doing. Currently trying to figure it out. Thank you for the video, great job.
Make sure to have all your grounds at the timing cover and the fuse box connectors
@@cjuanchy It was the SAME connector!! I couldn't believe it. I pulled on it and heard the ding.. thank you VERY VERY MUCH, I underbid this job & needed it done. My Mitchell program said 8.9 hrs.. yeah right! Thanks to you, I got it!!
@@jett-rampartflyer2852when I do it ,I remove the engine and trans as an assembly and takes me about 22 hrs
@@cjuanchy I did the same, dropped the subframe. Took me longer than 22 hours. I'd not done one before. Engine now sounds fine, just have to take care of a code p2176 that won't go away. 'Throttle adaptation- idle not learned.' I dont have a fancy scan tool to do an idle relearn. Tried a procedure i found online but so far hasn't worked. Its the only code I have, too. I should mention the throttle body harness is held on by a zip tie as someone broke the clip on it before it came to me. I tried cleaning the throttle blade but still no luck. Maybe tomorrow will be better.
@@jett-rampartflyer2852 If the throttle plate was moved by hand, it will not going to be good any more
Thank you for that video you saved me so much time appreciate you
Thank you for watching
@@cjuanchy le puedo llamar con una pregunta x favor es urgente
@@JuanCruz-ud6yh si claro me puede mandar su número a mi correo? Y de donde es el número porque aveces no me dicen que es de Mexico y me toca adivinar
thanks helped me on 2006 Caddy DTS this was a solve to communication
Im glad it helped you
My problem was something totally different (dealer gps/tracker wiring was at fault) but this video STILL lead me to the actually problem by just getting me to open the hood altogether 👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks for comment, I had weird electrical problems because of a GPS incorrectly installed not on just this type of trucks, I hope people read the comments ,the problem may be diferent and learn from shared solutions, Thanks again for shared your fixed problem.
Thank you so much! What a great discovery! Great mechanic, very thorough!
Thanks for comment
@@cjuanchy where are you located and wat was it called wat you fixed
@@tabathahorne7735 Its called exhaust VVT (VARIABLE VALVE TIMING) I dont give my personal info here, If you like send me a email to penita33@hotmail.com
And I Tell you my Location sorry.
It's hard to find good guys like this - like gold!
Muchas Gracias, ese problema me traia loco, ya Lo arregle, Muchas Gracias Bueno Trabajo!!! Es UN Chingon!!!!!
CJ
Thanks for the video. You showed the exact same symptoms I have. Keep doing what you do!!!!
Thanks
eres el mejor busque mucho en internet . es lo que andaba buscando gracias
This video led me to my no start prob.
THANK YOU!!
I am having this exact problem with my GMC this was a big help
Im glad that the info helped you
Thank you...... You save me a lot of money and I'm watching you from now on......
Its a happyness to help you and others
You have given me hope brother.. I'm having a similar issue with a traverse..i was starting to think the car wasn't fully in park because the indicator wasn't showing so I figured that was keeping it from cranking..thanks!!
I hope It helped you
My friend these cars are scrap metal,F gm and chevy,all junk,but their trucks are good lol
David Matousek I 100% agree.. will be the last one I ever buy 😐
Yooo, my car is having the same damn problem. Had me stranded from 9am to 7pm till i founf a ride, car wont turn over, i thought the damn thing wasnt fully in park and i thought it was stuck. Its still broke down, but now im watching youtube videos to find a solution
Thank you so much! You just saved me so many hours of stress!
Its good that it helped you
@@cjuanchy 😢I spoke too soon. My car is doing the exact same thing so I thought for sure it would work. Back to square one.
@@courtneyspencer5881 wiggle the wires
How do you know if the neutral positioning switch is bad?
@@courtneyspencer5881 with a scanner ,you have to have communication ,then pull codes
Aquí les dejo mi testimonio 👉🏼 bueno yó tengo un GMC ACADIA 2008 y me empezó a marcar (check engine) el Mecanico le puso la computadora y me marcó 2 códigos (p0014 & p0391) el punto es q me dijo q ivan a tener q sacar el motor para poder arreglar ese problema y por ese trabajo sería de $2’200.00 a $2’500.00 y como a mí se me hizo una cantidad súper alta pues no podía creer lo q me decía el mecánico, así q empeze a buscar más información sobre ese problema y empeze a mirar vídeos en TH-cam y de un vídeo a otro me llevo aquí! Y pues yó lo veo como cosa De Dios x q Gracias a este vídeo me pude poner en contacto con está gran persona q sin dudarlo me ayudo y bueno resultó q a mi carro solo le faltaba aceite y pues sí después de ponerle aceite mi carro sigue corriendo normal. Así q de ir a pagar como $2’200.00 + solo resulte pagando $55.00 y todo gracias a esta persona q es tan humilde. Gracias 🙏 por ser tan humilde que Dios le regrese todos sus favores en bendiciones. Súper agradecida con usted! 🙏
Gracias ,por su comentario Patty Barragan, y testimonio, es una satisfaccion poder ayudarle a quien necesita,y motivaciones como la que ud hace es lo que me lleva a poder compartir lo poco o mucho de mis conocimientos,una vez más Gracias por tomarse el tiempo de compartir su experiencia.
Me puedes contactar.con.el para explicarle..mi caso... tienes su num.tel
@@angellara1169 escribeme tu numero a penita33@hotmail.com
Tengo una GMC Acadia 2008 pero oy no quiso arrancar quiere pero no ledi cables y no como que la bateria carga pero no lo suficiente
@@joseavelarlugo8873 Si fuese la bateria baja ,cuando le pases corriente deja que se cargue un ratito antes de intentar prenderla,de lo contrario puedes ahogarla y se te complicará prenderla.
I am experiencing the same issue currently... This will be the first direction i go in.. Thanks
A LA VERGATION PAPI YOU SAVED MY LIFEEEEEEEEEEEEEEEE I WANT TO GIVE YOU A HUG MY FRIEND
Thanks
Excelente video , Muchas gracias por tomarse el tiempo y compartir ! Tengo el mismo problema con mi Acadia del 2008 justo esta mañana hizo eso por primera vez. Le envié un correo electrónico con unas preguntas referentes al video . Espero recibir respuesta pronto !. Gracias de nuevo .
Gracias por comentar, no me a llegado el correo con sus preguntas Faby.
Gracias ! , mi pregunta era l siguiente ; el cableado que usted arreglo , ejerciendo presión en el , lo reemplazo completamente or you just tide up ? If you replace it can you please told me where can I order from? Muchas gracias
No se reemplaza todo el cableado solo el conector de plastico donde entran los cables para conectar en el ABS Module, Orelys auto parts lo tenia.
Me podría decir cómo se llama en inglés . Y nuevamente muchas gracias por tomarse el tiempo para responder 🙏🏻
EBCM CONNECTOR
I just have same problem today. would be nice to have more light. I will look at the video again... good job, thank you. I hope I can do it my self..
Thanks same issue great fix saved me hours !!
I have same problem on my car Acadia 2013 I did same what you did but still no change if you give me any advice I am also a technician but for locomotive full respect you are great I wish I get your experience
Just came across this video very helpful 👍 good job am having the same problem with my Acadia 2017 ? And thank you again
Im glad to know that the info on this video helped you, Thanks for watching and comment.
Good vid fr
Thanks man this video helped a lot. Good info on this Buick flaw they got.
Deberás mil gracias a su dedicación a este canal . Sin tener algún lucro . Ojalá así fuéramos todas las personas , de poder ayudar sin lucro. Creo este señor es una magnífica persona ***** cinco estrellas para mi nuevo amigo .
Alejandra Sanchez Muchas ,Gracias es una satisfaccion poder ayudarles,compartir algo de mis conocimientos y lo hago con mucho gusto.
cjuanchy donde ed
cjuanchy donde esta su taller amigo
Gracias eso me facilito encontrar el problema en mi carro gracias gracias
My 2011 acadia is doing exactly this!
Have you try t find the problem?
thank you so much!!!!!
Thank you so much for the video
Buen diagnostico primo Juan!!!!!!!!! Gracias
Happened to me also! Thanks so much! God bless!!
Edward Flynn Amén, Thanks for your comment,God Bless you too.
Good detection. Owner should get the dealer/GMC to replace the harness free.
GMC Should reimburse every one of us Acadia owners that purchased one of these horrible rigs! Sooooo many issues and no help from GMC
Facts
As well as all the Lambda platform vehicles!
thanks you saved us we had same problem thanks again
Excelente video! Muchas gracias por compartir sus conocimientos
Con mucho gusto.
Good god...Garbage Motors At their Finest!!!😂😂😂👌...Niiice find bye the way Mane👍👍👍💯...After spending all morning on this persons 11 enclave, cleaning all grounds, guess i moved the harness, & it fired right up...put the airbox back in, back to no crank...& as i sit here eating lunch, Your video pops up & i Now recall that Exact Same Goddamm connector, giving a fight coming apart.....Ill be Dammed...Yeup, Thank you For the Video, Dead on !!!👍👍👍👌🍻🍻🍻🍻
Great advice sounds like your a mechanic I would take my car to
Ya tienes otro nuevo supscriptor gracias por compatir tu vendito conosimiento
Gracias por suscribirte espero te sirva la info del video.
cjuanchy si Juan mucho no habia visto su canal pero muchas
thank you!!!! straight forward, fixed!!!
Your the man dude thanks🤟
Thanks
Excellent job ( buena informacion) Saludos
Very good and informative video. Thank you Sir.
Thank you for watching
Your videos will be welcome in Spanish too, friend. Los esperamos.
Buena sugerencia ,Gracias Pedro.
gracias señor, todo muy bien explication. I have a similar problem on my 2008 buick enclave.
Espero y le sirva la informacion del video.
Muy buen Video. A mi me pasa igual aveces con mi 2008 Acadia. Entonces ahora ya se cual es el problema. Gracias por la información. Saludo desde Raleigh North Carolina
Chrys 22 ,si ese es tu caso,solo cambiale el connector,lo venden en Oraillys sin necesidad de comprar todo el harness,saluditos un placer ayudarte.
cjuanchy me puedes a ayudar tengo una ARCADIA 2010 veses prende a veses no ya le cambié la marcha y nada
@@orlintabora1555 encontro el problema ?
YOU ARE THE BEST
Thanks.
No its older video but got one at the car lot I work at and we pulled it in the shop yesterday and drove it around then this checked all fuses and has a good battery so will definitely try this tomorrow when I get to work
Very nice work amigo.
Hola muy buen video tengo El mismo problena con un Cherokee 2014
Que codigos da?
@@cjuanchy u0100-00 u0422-00 u300a-00 son agunos de Los codigos
@@jordyrodriguez5022 esccribanlos en algun papalito,borrenlos y vuelvan a tratar de prenderla y aver que codigos regresan
@@cjuanchy eso are
@@jordyrodriguez5022 ok
Mas perfecto no te pudo aver kedado el video gracias problem fix but a Buick enclave 2009 was mine but it was the same thing
FERNANDO CONTRERAS ,me alegra que te haya servido ,yo cuando tenia el problema no encontre nada de informacion pero vi que habia muchas personas con el problema pero no respuestas y cuando encontre el problema ,decidi compartir mi caso para que ayudara a quienes lo necesitaran,gracias por tu comentario ojala a muchas más les sirva la info.
Muy buen mecanico Felizidades
Gracias.
Great video, thanks for sharing
Thanks for your comment Mike M.
Agree thank you sir awesome directions and find
@@harleyrn1393 Thank you,for your comment.
Nice bud! this is exactly what the issue was. 👍👍👍
Thanks for comment.
This guy is a master p
Esos Zip ties como ayudan mucho. Mi troca esta lleno de puros zip ties. Gracias
Muy buen video pero sería más visto si fuera en español gracias
Thank you for showing me the problem this is the exact issue that my GMC ACADIA 2011 is giving me I had the battery replaced and still happening now watching your video helps me show my mechanic what’s happening to my SUV. Can you please name the part that needs to be replaced for me please ??? Part number or part name ? Yo hablo español si necesitas que le escriba de nuevo? Lo busco es el nombre de la pieza para yo comprarlo
Gracias
Elizabeth
Hi Liz it dont matter English or Español la parte no es de Dealer de Chevy es de aftermarket y yo solo la pedi como ABS MODULE HARNESS CONNECTOR the plastic part,y tienes transferir alambre por alambre
@@cjuanchy -omg thank you so much !!!!!! You helped me big time !!!!!! Have a good night !!!!
Gracias Liz, para servirles
Has this prob last year now its back. My mechanic found nothing, speculated security system, since my light goes in and out. Been goin on here lately, stuck at store finally cut air off and it cranks. Still searching for answers
@@rodrickthompson2799 check your grounds by the P/ S pump
I have a gmc acadia 2011 slt, i tried to start the engine with the fob for the first time today and then i noticed 2 times my car was struggling to turn on the 3rd or.4th time it just wouldnt start but i was also trying to change the radio system yesterday not sure if i messed something up. My battery has died before and it would usually tell me it was the battery in the dashboard...waiting to get thw battery jump started if its not that ill try this video :(
I tried it but it still didn't work, I noticed that the gas indicator ok this video didn't show any gas and when he fixed it, it did work so I'm guessing mines is another problem cause the gas indicator on mine is working but I cant get it to work yet
Tengo el mismo problema con el mio de 2012. Me marcas traction control, air bag, check engine y aveces no me funciona el marcador de gasolina. Voy hacerle el trabajo Este y te aviso comp salio. Gracias!
Antes de que lo hagas asegurate que todos los conectores esten bien conectados
Great video Juan ! 👍🏼
Thanks
Colega Saludos, Gracias por el aporte!! EXCELENTEEEE...
Gracias por ver y comentar
Is it possible to replace the ABS Harness Connector? If so...do you have a part number?
Mine just started doing this, weeks prior I notice I would turn my car off and the fan would still be running which it never did before and the temp gauge would go up about 10° and when we came to a stop at a stop sign or stop light only the dash said service break system but how did you fix it❓
Thanks for watching, at my case ,it was the connector at the ABS MODULE , There is been followers that they had bring their trucks and turn on to be the ground splice by the power steering pump.
@@cjuanchyso the ground splice by the power steering pump thanks
Great Video. Thank you
Thanks for comment
Have the same problem.. my 2012 acadia didn’t start suddenly 2 months ago and replaced the starter then everything worked.
About 2 weeks ago the car started playing again, it gives me a ticking noise and it wont start until i just keep trying to start it like tick tick tick then it starts.
And now it wont even start, i try starting and nothing happens and everything shuts off and then there is no power and i cant even get the key out.
The Key doest come out because the Battery is Death,it sounds like your problen is your Battery,Charge your Battery or Replace it for a New one,and we go from there,let me know after that.
cjuanchy yes indeed you were right, the positive cable was loose and even the battery cover bolts were not tightened. It was due to the last maintenance i did when my mechanic replaced my alternator. I went back to him and told him that so that he would be more careful again
Had a similar problem and it was a loose battery cable after battery replacement. Didn't happen right away but a few months later.
Thanks for your comment ,It may help some one else.
Yo tengo una GMC Acadia le cambiaron el motor xk el primero dicen que estaba malo con el primero no ensendia y con el segundo igual le cambiaron un modulo del fuel systems y nada el carro si ase crank pero no ensiende si ai gas y corriente en las bujias pero no ensiende y ya no saben k aser talvez me puede ayudar con este problema gracias x su videos
Le checaron compresion? Necesito mas detalles si gustas escribirme tu numero en mi correo, penita33@hotmail.com
cjuanchy trataré de checarle la compresión muchas gracias 🙏 por su ayuda yo le avisare que pase más adelante
Wow. Thank you. It works!!!!
pttazwilliams ,Thanks for you comment
Hello I have a 2009 GMC Acadia ,,,and I have a starting issue weird thing is that one day it starts normally and then a week or months later I put the key and like in this video nothing happens,,,all lights go on,gauges on but no crank,,,I put it in neutral and nothing,,,leave it then next day it works fine ,,,I changed the starter,starter relay,,and nothing!!!!! Please help !!! And yes thanks for the video,,great talent!!!!
You need to scan it and see what codes are stored to see where to start to diagnose it.
@@cjuanchy ok ,,,, thanks
I love you man thank you!!!!!
My enclave is giving me the same problem. No crank, no start, and the tailgate doesn't open. At first, I thought it was the starter. I replaced it, same issue. I'll try these steps and see if that would solve the issue. Thanks
What was your solution sir? Mine does not start and the rear gate doesn’t work….. whatcha do?
2009 Buck enclave. Wife barely drove it home. Wouldn't start for me. Had a bunch of crank cam codes. Had been clacking at startup for 6 months. Was gonna change sensor. Messed with discord. Unhooked battery for 4 months. Key stick in on position. Read to wiggle screws on fuse box. Now it gets power. When I try starting check engine light blinks super fast and the just a click. I swapped relays around and thought I checked all fuses.... Help I just wanna get it back to point where it tries turning over...
There’s water on the fuse box behind the glove box from the sunroof because the drains are clogged on the driver and passenger side pillars; or there’s water on the floor because the air conditioning drain plug is clogged on the floor board behind the middle console panel by the gas pedal.
Most likely is due to clogged sunroof drains
09 Acadia New battery, new starter, solenoid clicks no crank no start. Rear hatch not working. Remote start nothing. Should I be looking at this harness?
If it clicks it sound like a bad connection, did you check for 12 V at tick cable on starter,all time, and 12 V on thin wire at solenoid on starter at start ?
If you can please sent me a phone number where I can reach you at penita33@hotmail.com
I will check that. I know right now battery is down to 11.4 same out at the fuse box. Before this happened it ran rough for about 30 seconds then stalled then wouldn’t crank. Put new starter in made tight connections but I understand what you’re saying just not 12v getting down there probably. I’ll check voltage later today. Thanks!
Also can you check for codes on all modules posible please and address them.
I have an Acadia 2008 and the gages for temperature and gas go off and traction off appears and the U100 code is showed. After this, my truck no crack or not start. It this issue related to this connector?
Hola, en todos los casos deben escamear todos los modulos aver cuantos dicen con que modulo no se pueden comunicar si gusta pueden envuarme en un correo electrónico un numero a donde comunicarme y de que parte es ese número porque aveces pasa que los numeros telefonicos son de México. U otro país.
@@cjuanchy Estoy en México pero paseme un número y le hago una llamada mañana.
@@arturordztube paseme la direccion de un correo a donde mandarselo
@@cjuanchy Este es mi correo electronico arcasas2001@gmail.com para que me mande su numero y le pueda marcar
great!!!
Hi there , so how Would you Repair the Harness ? Would change all the Wires or just the
Connector of the Harness ?
Thank you ..
Just the plastic part,all you have to do is just swap wire by wire from the old plactic connector to a new one.
Nos acaba de pasar eso aun no la revisan en el dealer, pero no enciende nada del tablero , tiene pila nueva. Sera el.mismo problema?
Buenas, yo tengo una 2010 traverse. El problema que tengo es que de repente no me prendió como que la pila estaba baja, le pase cables y prendió. Le quite el cable positivo para test el alternator y no es, fui a checar la pila y que la pila está buena el voltaje que me da el alternator es 14 volts. Aveces cuando quiero prender la troca y le algo crank no ase nada tengo que darle para tras a la lleve y intento otra vez y prende. Me podría ayudar. O que me recomiendas. Gracias que dios lo bendiga.
Apunta como si tu problema fuera el starter,asegurate primero que nada que esten bien puestos los cables de la bateria, y pon atencion a si hace solo click, o si cuando da marcha,da vuelta despacio el motor, y que este haciendo buen contacto los alambres que van al starter o tu bateria ya empieza a fallar, es mas notorio cuando el clima baja a que la bateria ya este fallando o si gustas puedes enviarme tu número telefonico a mi correo penita33@hotmail.com