Thanks for this video. This helped me a bunch. Especially with mounting the kill switch and how you switched around the mounts on the electrical. I did the xr50 bars with stock triple clamps. The only thing I did different was add a longer clutch cable, the stock worked but it was a little too tight for my comfort. Thanks again
Got the renthal 611 "playbike" bars just to have something dofferent instead of the protapers everyone has on theor 110's. Not as tall as the xr50 bend but taller than the klx bend
Nice video I have a tall swat on my 02 with the 110l suspension and bbr swingarm I'm running the pro circuit klx bend bars on it with stock clamps cheers
@@pitbikemods1623 so I can just swap out my bars with the DBK BARS with out changing any of my cables? How about my throttle tube? Do I need to buy a new one? Or use the one off my klx?
How wide do the bars feel compared to the 50 bars? We just bought the 110 bars and they feel crazy wide holding them up to the bike, contemplating cutting them down a bit.
After I recorded the video I ended up cutting the bars down a little wider then the xr50 bars as I preferred the width of them. The klx bend is too wide for a pit bike
how tall are you? i have the pro taper 110 bend bars (have never mounted them) and was going to get the xr50 bend bars. But last night i through on the Mini Worx triple clamp...should i still get the XR50 bend or mount up the 110 bend and see how it feels? Another thing, do i have to buy a new throttle tube when i throw the new bars on? Im assuming i do.
180cm/6 feet. I’d recommend going the 110 bend as the mini worx clamps will raise the bars the height you need. You can use the stock throttle tube. But I recommend replacing it as the stock grip is really hard to take off.
@@pitbikemods1623 before I threw the triple clamps on I had risers on it with the stock bars...I've yet to mount the 110 bend on it cause when I ordered them I thought I ordered the 50 bend and was thinking about sending them back. I'm 6 foot myself. My buddy has the 50 bend on his CRF, I wanna pop his off and throw them on mine so I can see if I like them or not but I think the easier way would be to throw my triple clamp on his bike so we don't have to disconnect everything
Have you fit the XR50 bars into the stock klx clamp? I saw in another video the xr50 bars were slightly larger diamater than klx bars, your video seems more thorough so I'm hoping yes lol
@@pitbikemods1623 Ok the other dude took a grinder to his stock clamps lol. I ordered a 2022 110L, ordering Bars, pegs, over the top pedal and and frame cradle, should be a blast!
Thank you for this video! Answered all my questions I’ve had a hard time finding a clear answer to.
Here from the future. Excellent attention to detail. Precieate the beta. Very helpful
So good to see you back dude, love the vids
Is the pro taper mini se the xr50 or taller than stock? and how much longer is your brake cable?
Thanks for this video. This helped me a bunch. Especially with mounting the kill switch and how you switched around the mounts on the electrical. I did the xr50 bars with stock triple clamps. The only thing I did different was add a longer clutch cable, the stock worked but it was a little too tight for my comfort. Thanks again
Do you need longer cable for front brake
You don’t have too. It will be a little short and will rub against the front number plate and scratch it
Got the renthal 611 "playbike" bars just to have something dofferent instead of the protapers everyone has on theor 110's. Not as tall as the xr50 bend but taller than the klx bend
Are the se mini high the same as the x50 series ?
What size is the bar pad on the Xr50 handlebars so I can order that green pad, there's an 8 inch and 10 inch
Nice video I have a tall swat on my 02 with the 110l suspension and bbr swingarm I'm running the pro circuit klx bend bars on it with stock clamps cheers
What kinda camera an Laptop do you use for your videos?
Tha knyou so much for this
do they work on 2016 klx110l?thx
I just pick up ODI Dbk bars and all new extended cables, cause I have no clue what I'm doing
That was helpful as cheers dude
Im getting bars for my ttr90 and i dont know if i would need a bigger break cable do you know?
Hey man, do you have some more videos coming? I noticed you haven't posted in awhile. Love the content keep it up. Have learned so much!
@@pitbikemods1623 ok great. It has been difficult getting parts in the us also alot of items are out of stock and or on back order.
Can u run the xr50 bars with the stock klx top clamp
Yes
Hey would ODI, DBK BARS work with all stock cables on 2021klx110 L
@@pitbikemods1623 Dam, I already pick up all 3 cables lol.....
@@pitbikemods1623 so I can just swap out my bars with the DBK BARS with out changing any of my cables? How about my throttle tube? Do I need to buy a new one? Or use the one off my klx?
How wide do the bars feel compared to the 50 bars? We just bought the 110 bars and they feel crazy wide holding them up to the bike, contemplating cutting them down a bit.
After I recorded the video I ended up cutting the bars down a little wider then the xr50 bars as I preferred the width of them. The klx bend is too wide for a pit bike
Same! I got the bars like wtf?! Shit is huge
how tall are you? i have the pro taper 110 bend bars (have never mounted them) and was going to get the xr50 bend bars. But last night i through on the Mini Worx triple clamp...should i still get the XR50 bend or mount up the 110 bend and see how it feels? Another thing, do i have to buy a new throttle tube when i throw the new bars on? Im assuming i do.
180cm/6 feet. I’d recommend going the 110 bend as the mini worx clamps will raise the bars the height you need.
You can use the stock throttle tube. But I recommend replacing it as the stock grip is really hard to take off.
@@pitbikemods1623 before I threw the triple clamps on I had risers on it with the stock bars...I've yet to mount the 110 bend on it cause when I ordered them I thought I ordered the 50 bend and was thinking about sending them back. I'm 6 foot myself. My buddy has the 50 bend on his CRF, I wanna pop his off and throw them on mine so I can see if I like them or not but I think the easier way would be to throw my triple clamp on his bike so we don't have to disconnect everything
@@pitbikemods1623 yeah I watched a video earlier of a guy taking his stock grip off and it looked like it was kicking his ass.
Have you fit the XR50 bars into the stock klx clamp? I saw in another video the xr50 bars were slightly larger diamater than klx bars, your video seems more thorough so I'm hoping yes lol
@@pitbikemods1623 Ok the other dude took a grinder to his stock clamps lol. I ordered a 2022 110L, ordering Bars, pegs, over the top pedal and and frame cradle, should be a blast!
cheers