Harry Potter is moving! (Under Stairs Storage)
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2023
- After fitting the staircase I built some under stairs storage complete with push to open doors an drawers.
Tools
Impact Driver - Festool TID 18
Combi Drill - Festool TPC 18/4
Track Saw - Festool TS 55
Tracks - Festool FS 1400/2 & FS 800/2 & SYS3 M 137 FS/2-Set
Paner - Festool EHL 65EQ
Jigsaw - Makita LXT BJV180
SDS - Makita LXT BHR202
Circular - Makita LXT DRS780
Sander - LXT DBO180Z
Radio - Makita LXT DMR200
Multitool - Erbauer EMT300-QC
Shop Vac - Fein Dustex 25L
Hammer - Estwing 20oz
Filming Kit
Camera - iPhone 12 Pro
Camera - Canon EOS 60d
Lens - Canon EF 50mm F1.8 MK II
Lens - Canon EF 24-105mm f/4L IS II USM
Microphone - Movo VXR10-PRO
Editor - iMovie
Editor - Filmmaker Pro
Links
Support Me On Patreon: www.patreon.com/TheOneOffWorkshop
Buy Stuff: www.theoneoffworkshop.etsy.com
Web: www.oneoffworkshop.co.uk
Facebook: oneoffworkshop
TH-cam: / @theoneoffworkshop
Cheers for this one bud saved me a lot of thinking time
You're welcome 👍🏻
Interesting van set up. Volvo with trailer. Well im saluting the volvo not being a target for thieves looking for tools and very rare I have room in my van for 8x4 sheets anyway so im also saluting the trailer. 👍
Agreed!
Best job for under thos type stairs. You made it nice an tidy
Lovely job !!!
Baz, nice video, good workmanship, well done.
Totally pinching this design
Awesome!
Fantastic use of space, well done.
Thanks
Very nice work 👏
Nice work brother
dang son, Festool drills even sound like they're made out of solid titanium.
Looks great
Thanks
Well done! But not much room left for Harry Potter tough...
Very nice job
Thanks 👍🏼
A bit late to the party but came across this searching for some inspiration on under stairs stuff.
I'm in the plannings stages of replacing a pallet wood creation I made a couple of years back.
I'd be interested to hear about what wood was used, looks like mdf 15mm for the cupboard carcass... 12mm for the rest?
It is also a shame that there isn't any talking since I'd love to know not just what you're doing but why and it'd be great to have that little detail you just can't get from video only.
10/10 for the end result, I'm only a DIY level but wish me luck when it comes to doing mine later on this year!
Hi - It's all 18mm MDF. All the best with your project 👍🏻
beau travail, net et précis
Merci Jean. C'était un boulot agréable 👍
Looks cool, but MDF resting on tile that will be wet mopped is trouble.
Sure it would be if it was to be left as it is. The client will be having it decorated and sealed to the floor and walls, this is pretty standard. Thanks for raising a valid point though 👍🏼
Thanks for the video. I have a similar job to do myself. Can I ask what draw slides you used and what weight they were rated to please? Can I ask how much a job like this would cost to have do also. I think I have been way over quoted. Thank you.
Hi. I would say anywhere between £1500 - £2000 depending on materials and spec.
Here is a link to the runners I used:
YENUO Push to Open Drawer Runners... www.amazon.co.uk/dp/B08BK394NK?ref=ppx_pop_mob_ap_share
Stairbox are epic aren't they 😊
Fantastic
Great job and thanks for sharing. Looking at doing something similar for a customer. Noticed you used 3 drawer runners for the bigger pull out did you use 3 for the smaller one too?
Thank you. No just on the larger drawer for stability 👍🏼
What make and load draw runner was used please?
I'm planning to do this under my stairs but it was made of tubular metals.
How did it go?
Brilliant, where did u buy your door runners and what weight will they support.
Hi, I used these, 45 kilos from memory 👍🏼
YENUO Push to Open Drawer Runners... www.amazon.co.uk/dp/B08BK394NK?ref=ppx_pop_mob_ap_share
Inset hinges for door?
Hi, may i know if you add the front cover of the cabinet, how could it still push the slider inward to open? because if the front cover is bigger than the inner cover of the cabinet, it may blocked the push distance by the vertical supporting board?
Hi - I use push to open drawer runners and door catches. These naturally create a small recess behind the frontal to allow function. Hope that helps 👍🏼
nicely done! one question: why MDF?
Thanks. MDF was the clients choice as it will be painted.
Great job sir.
What sort of price are we looking at ?
Thank you. I would suggest a budget of between £1500 - £2000 depending on your requirements 👍🏼
Nice to watch - thanks for your content. Just wondering how many hours of work this took you ??
Thank you. It took about 16hrs in total.
Hey mate, what kind off drawer slides did you use??
Hi, I used these, really decent product…
YENUO Push to Open Drawer Runners... www.amazon.co.uk/dp/B08BK394NK?ref=ppx_pop_mob_ap_share
what screw size are you using?
3.5 x 30, 40 & 50. I’ve found that 3.5s work really well with 18mm MDF 👍🏼
Качественно сделано, но очень тяжелая конструкция получилась. За толкатель двери будете постоянно цепляться одеждой или руками