DIY Vocal Booth (ISO Booth) - How To, Step by Step - Modular & Portable! - Tom Goss & Isabelle LaRue

Thanks for watching, all of the equipment used is in the links below!
This is a step by step guide to building your own modular, portable and moveable vocal booth (iso booth). Any questions about the how to? Leave them in the comments or write me a note.
CONSTRUCTION EQUIPMENT:
2x4 (for the walls): go.magik.ly/ml/1knhx/
1x6 (for the floating support center supports): go.magik.ly/ml/1knhy/
1x10 (for the floating support end support): go.magik.ly/ml/1knhz/
R Tech Foam-board Insulation: go.magik.ly/ml/1kni0
Corner Clamp (to help make sure your framing is square): go.magik.ly/ml/1kni3/
Acoustic Insulation: amzn.to/3vSziiN
Straight Edge: go.magik.ly/ml/1kni4/
Square: go.magik.ly/ml/1kni6/
Weatherstrip Tape: go.magik.ly/ml/1kni9/
Liquid nails high heat: amzn.to/3QtOYAI
Spax Screws 2.5”: amzn.to/3JJAvOP
Spax Screws 3”: amzn.to/3zNw0hB
Toggle Clamps: amzn.to/3bG9Ohu
Door: go.magik.ly/ml/1kojh/
Door Handle: go.magik.ly/ml/1koji/
Finishing Nails: go.magik.ly/ml/1kojl/
MAKE IT CUTE EQUIPMENT:
High Density Sound Absorbing Panels (Grey): amzn.to/3Abhfqq
LED Floor Lamp: amzn.to/3zK7HRY
Elastic Memory Foam (under the carpet): amzn.to/3JGARpF
Computer Monitor: amzn.to/3QAQkJR
Monitor Mounting Bracket: amzn.to/3PcN4U9
Long HDMI Chord: amzn.to/3JKOIep
Soundproof Wall Panels (exterior): amzn.to/3Pf1KSF
Pink Interlocking Carpet: amzn.to/3djusEJ
Neumann TLM 103 Condensor Microphone: amzn.to/3SGmNAA
Mic Stand: amzn.to/3bDWOJu
Pop Filter: amzn.to/3BVWL6m
Collapsable Shelving: amzn.to/3vRSzk2
Bluetooth keyboard: amzn.to/3Qf050Q
Bluetooth mouse: amzn.to/3p8jK6A
I hope this video, and these links are helpful. These are affiliate links. I receive a small portion of revenue from your purchase of these items if you use these links. If you have enjoyed the video, and it has made it easier for you to build your own booth, please consider using these links to purchase items for your iso booth.
Thanks,
Tom
00:00 Introduction
01:03 A Series of Boxes
03:57 Floating Support
05:04 Assembling the Booth
06:11 Making it Cute
07:59 How Effective Is It?
08:50 How Much Did It Cost?
09:29 Engineer Your Space!

[@EngineerYourSpace]

Had so much fun working on this project with you Tom!! It’s the cutest sound booth for sure 😍

[@tomgossmusic]

Thanks Isabelle! You are my smartest friend for sure!

[@giannishen]

You built a modular yourself, what a genius！
You did a really great job, thanks a lot for sharing！👍😄👏

[@tomgossmusic]

Thanks a lot! :) I couldn't have done it without Isabelle!

[@giannishen]

@@tomgossmusic However, you are the one who invests the most！👍👍👍

[@astnwndo]

The voice over recording is so clear and plane free! 👏👏👏

[@tomgossmusic]

Thanks Austin!

[@diegolarenas2342]

Thanks for the love Tom!! Was happy to help in anyway I could 😊

[@tomgossmusic]

You're always my hero! Do you want an ice cream sandwich?

[@HisValor]

Awesome job! Thank you for sharing your step-by-step and for including Isabel! Engineer Your Space is awesome!

[@tomgossmusic]

I love her!!!!

[@pastry111]

ngl there's literally terrible construction noises going on rn and it will continue for the next 1-2 years. so im finally going to do it. thanks for this video, ily

[@tomgossmusic]

You'll love the result!

[@DrewW0tM8]

I'm a voice actor and I want to build this booth. Do you have any blueprints or schematics I can use to build one myself?

[@erikriversmusic]

Thank you! This gives me hope.

[@rmccooty]

So cool!

[@tomgossmusic]

Thank you!

[@ShawsOwn]

I'm an aspiring voice over artist so I've been running through ideas for my own apartment Vo booth. This looks like the closest to what I would like to do.
By any chance to have blue prints or plans/instructions (besides in the video) anywhere that I could look at?

[@actemple3282]

Super good blog

[@devan6127]

I’m also interested in the blueprints if you have them, trying to figure out if I can accomplish this without any saws to work with

[@tomgossmusic]

I don't have blueprints unfortunately. We did this without using a saw. Any cuts, we got done at Home Depot. :)

[@MoonBrideMusic]

Thank you for this awesome video!! Do you have any guess how much that booth weighs?

[@VVerderame]

Amazing Job. I love that is comes apart. What plywood did you use on the inside and outside of the walls?

[@tomgossmusic]

It's actually very thin, 1/4".

[@thepersonguy1770]

I'm thinking about building one of these, do you happen to have any blueprints?

[@tomgossmusic]

I do not have blueprints, the scrolling shot is pretty much the idea. The rest we did in our heads. :)

[@thepersonguy1770]

@@tomgossmusic Hey thanks for replying! do you think you could provide the quantity's of each construction item or is that something you no longer have on hand

[@Londya]

What about ventilation?

[@tomgossmusic]

I chose not to make any. I just open the door.