Looks easy when it's all clean at the perfect height. It's not even rusted or dirty! How many times has that bushing been pushed in & out of that same trailing arm?
I recently done this trailing arm bush on a crv , leave the arm on the car just undo the trailing arm bushes bolts , and 2x2 bit of wood to lower the rear end down enough for the bush to come out, then just tap it out with a hammer and your trolley jack handle. Takes 30seconds to knock it out , and less than hour half the whole job done per side
With this tool, you can install the TA bushing without putting dents on the TA cup or the trailing arm itself..It’s your preference if you want to do a clean professional job..
@@pellergin If a gear puller can damage the arm, this can too. Besides all that, for less money you can go to harbor freight and buy a straight up shop press and do the job with that and have a press you can use for many other jobs. Not just one. If your going to take the trailing arm out anyway just to use this tool a press would be much easier.
Good day , how are you! Thanks you for your feedback:)) if you have any question or inquiry , please feel free to contact us by hcb@hcb-autotools.com.tw
Good day , how are you! Thanks you for your feedback:)) if you have any question or inquiry , please feel free to contact us by hcb@hcb-autotools.com.tw
Looks easy when it's all clean at the perfect height. It's not even rusted or dirty! How many times has that bushing been pushed in & out of that same trailing arm?
Set the new bushing on dry ice before installing. Slips right in.
I recently done this trailing arm bush on a crv , leave the arm on the car just undo the trailing arm bushes bolts , and 2x2 bit of wood to lower the rear end down enough for the bush to come out, then just tap it out with a hammer and your trolley jack handle. Takes 30seconds to knock it out , and less than hour half the whole job done per side
There is an easier way "without" tools! We just did 2 of them this week end. I will upload the video soon on my channel.
Here is my Video : th-cam.com/video/P8NXDlqkcWo/w-d-xo.html
With this tool, you can install the TA bushing without putting dents on the TA cup or the trailing arm itself..It’s your preference if you want to do a clean professional job..
@@JodBronson Hi i have this to do on a crv 2008 4x4 was wondering if you have uploaded the video please
@@philip.aocallaghan4602 - I have the link... SCROLL UP !!!
Gear puller, steel pipe section for the press cup... cut costs by more than half and don't end up with another tool that barely gets used.
There is an easier way "without" tools! We just did 2 of them this week end. I will upload the video soon on my channel.
@@pellergin - Here is my Video : th-cam.com/video/P8NXDlqkcWo/w-d-xo.html
Gear puller can bend/damage the arm, where it 'grabs' on to.
@@pellergin If a gear puller can damage the arm, this can too. Besides all that, for less money you can go to harbor freight and buy a straight up shop press and do the job with that and have a press you can use for many other jobs. Not just one. If your going to take the trailing arm out anyway just to use this tool a press would be much easier.
boa noite essa mesma ferramenta seve para troca do ford focus
Good day , how are you!
Thanks you for your feedback:))
if you have any question or inquiry , please feel free to contact us
by hcb@hcb-autotools.com.tw
muy bueno pero tendría que tener uno para calificarlo y recomendarlo con mis colegas
Good day , how are you!
Thanks you for your feedback:))
if you have any question or inquiry , please feel free to contact us
by hcb@hcb-autotools.com.tw
please turn off the music.
Som desnecessário