I find using a hot glue gun works pretty good for the lower vents.wear thick rubber gloves tho otherwise you might burn yourself lol.where did you find that weatherstriping on the hood?
Hey I am 14 just bought my first newer sled and my first ski doo. Bought a 2006 ski doo 600 sdi. Spent 4,000 on the sled and it has I think its the x package or something like that. all stock. I want to know the best (cheep) UPGRADES. I saw you mod videos and I did most of the free ones, but didn't vent the sled yet. Dont have any money. (spent on the sled) What I will DO in the next 2 years when I have the MONEY, Track extension NOT SURE WHAT LENGTH (TRACKS USA) CAN LED light kit. WHAT ELS CAN I DO
Aiden Olson get rid of the old rev seat and replace it with a boss seat or a skinz if you can find one that’ll fit then get some protube lightweight running boards get a clutch kit if you’re a wheelie guy gear it and clutch it and there’s not many cheap upgrades but the only cheap ones I’m aware of are the headlight delete and replacing it with a led bar and the vents and probably remove the taillight save some weight then it looks better
did you splice into DC volt wires right after the stater? if not were did you get power from or where can I without battery? for the koso digital temp gauge +powermodz
what kind of recoil do you have in that rev? because I have a rev as well but the recoil is horrible its the same year and cc if you could let me know that would be great
hey i know its an old vidéo but i have the rev and put a vold air intake on it would i need to change anything. and on hard pack snow i go wide open and it spudders like its hitting the rev limiter an thoughts why? tia
Or can I connect the power for temp gauge into my key ignition even know its pull start when I do start it will come on because my key ignition is on??
+Nevyn Reinhart i actually plugged the wires right into a little plug i found right under the dash area - it has power and ground - not sure what it was for but there are two of them.
A motor is a device that creates motion. So 'that' guy is correct in calling the internal combustion engine a motor. You can also get hydraulic motors, electric motors, solid fuel motors, pneumatic motors, etc.
Oh goodie, some more video's from the boys .I love this stuff ...everything ! It's perfect!
Oh I hear you on that one. The sleds look good hope you get the rev fixed an ready before the next snow. Good luck to y'all
I like these videos that have more of a shop feel with more then one person in the video.
That REV is a survivor...AKA "The Phoenix" it will rise again.
Ya lol survivor alright , that rev is a hurting pos.
Hey Powermodz, heard you mention flushing the coolers out. Wondering if sometime you can do a video on that sometime.
I find using a hot glue gun works pretty good for the lower vents.wear thick rubber gloves tho otherwise you might burn yourself lol.where did you find that weatherstriping on the hood?
Hey I am 14 just bought my first newer sled and my first ski doo. Bought a 2006 ski doo 600 sdi. Spent 4,000 on the sled and it has I think its the x package or something like that. all stock. I want to know the best (cheep) UPGRADES. I saw you mod videos and I did most of the free ones, but didn't vent the sled yet. Dont have any money. (spent on the sled)
What I will DO in the next 2 years when I have the MONEY,
Track extension NOT SURE WHAT LENGTH (TRACKS USA)
CAN
LED light kit.
WHAT ELS CAN I DO
Aiden Olson get rid of the old rev seat and replace it with a boss seat or a skinz if you can find one that’ll fit then get some protube lightweight running boards get a clutch kit if you’re a wheelie guy gear it and clutch it and there’s not many cheap upgrades but the only cheap ones I’m aware of are the headlight delete and replacing it with a led bar and the vents and probably remove the taillight save some weight then it looks better
Aiden Olson and get some vforce 3 reed valves
did you splice into DC volt wires right after the stater? if not were did you get power from or where can I without battery? for the koso digital temp gauge +powermodz
How do I go about wiring up the digital temp gauge on my rev 800 ?
You gonna pit your other light back on or just leave it off it looks good with out but I think the more the light the better at night
I dont ride at night if i can help it, no trail riding with that machine and where we go i'm always out by nightfall or we are into some bad times:)
what kind of recoil do you have in that rev? because I have a rev as well but the recoil is horrible its the same year and cc if you could let me know that would be great
I have the same gauge on my sled it comes in handy man
Could you do a install video of the koso temp gauge?
hey i know its an old vidéo but i have the rev and put a vold air intake on it would i need to change anything. and on hard pack snow i go wide open and it spudders like its hitting the rev limiter an thoughts why? tia
Will that skinz seat work on a 07 mxz or is it just for the long tracks
no i had to make it - skinz is junk tho
What year is that rev?
Or can I connect the power for temp gauge into my key ignition even know its pull start when I do start it will come on because my key ignition is on??
+Nevyn Reinhart i actually plugged the wires right into a little plug i found right under the dash area - it has power and ground - not sure what it was for but there are two of them.
What sender do you use for that temp gauge?
Gauge from SLP! www.slp.cc/catalog.cfm?pageID=detail&catalogID=4&catID=30&productID=2014
What's the best chain case oil to run in my 2003 800 mxz rev chaise
chassis*
Great video.
assuming there is no gas in there... LOL
Make sure theirs gas in it before using the heat gun lol jk
Lol the kids
why does this guy keep calling engines motors. A motor is electric
Because an internal combustion engine is also called a motor:) At least that's what this guy thinks.
A motor is a device that creates motion. So 'that' guy is correct in calling the internal combustion engine a motor. You can also get hydraulic motors, electric motors, solid fuel motors, pneumatic motors, etc.
Where did you get that didigital temp gauge?