3:16 I can't stress this part enough. I just installed a clutch kit on my 2013 Ski Doo Summit Sport 600, after riding this sled the last 8 winters it is hands down my most favorite upgrade. It makes a HUGE difference when it's dialed in with better springs, helix and clutch weights. Shoutout to Dynamo Joe from iBackshift 👍
@ tony johnson i own a550 94 ext panther. those are specifically for trail riding,not draging or ditch banging or anythin like that. anyway. i blew it up so i took the 550 out and had it professionally bored and honed now its a 580 i had to put it on hold from other projects,but i'm goin to put a new primary and secondary clutch in it. a performance Y pipe, a performance exaust and a can. then obviously give it a good tune up and after thats all done. look into a good track. but i guesss this all depends on your budget.
Louis, I have a '11 ski doo 800 TNT...what do I need to do to go from my stock 120" track to a 136" like you mention in this video...is there a kit? Price$? Thanks, love the videos!!
I was looking for an exhaust can for my 2008 polaris iq shift when a learned that rather of gaining power you loose some because the back pressure of an aftermarket can is reduced too much. Also some says that you sacrifice relieability. I'm really confused and i wanted your opinion on that subject. Thank you!
Louis I have a 2005 gsx 600 limited any pointers on what I can do with it any places I can find good cheap extensions for the track? Love the vids to keep them coming!!!
I have a 96 600 Ski Doo triple. one of the cylinders is constantly fouled out compression across all three are good wasn't sure if a valve would cause that or not carburetors for just rebuilt
I just got a 93 arctic cat wildcat 700 it's really heavy and the only thing is there's not much I can do for weight reduction I would like to do some mods to it to make it faster but I still can ride trails
Is this a RT? I bought a renegade RT this winter. But the combination of being front heavy and low at the belly, it causes it to ride the belly as much as the skiis which i dont like. and second, id like a tighter ski stance, do you have any recomendation on A-arms? or perhaps a small lift in the front will cause the skiis to come a bit closer together? Thoughts?
Hey Powermodz just wondering what can do you have in there. I have the RK tec 700 Engine rev SDI. I ride mostly trail so It can't be too loud. Just wondering what you think. I don't want to lose performance. Your input would be greatly appreciated thanks. Also where did you get that seat.
My 2009 Polaris 600 155 performs well but I’ve noticed even in mild weather, it likes to foul its plugs although it is fuel injected. Would my fuel injectors need to be reprogrammed? The clutches have flatland weights in them
You should really do a video for moding old sleds, I have a 94 v-max an i know it sounds kinda dumb, but I really wanna mod it, on a budget. I have no clue what to do or where to start. I'am starting with putting a longer track and thats it.
PowerModz would you buy a Polaris 340 Indy and make it a mountain sled, and if you would could you even make one, I think it would have to little power for the big hills and or trails. It would be a good little play sled though just think about it
it takes allot of money for little gain and often it just takes power from here and adds it there To keep your sled having wide paramiters leave it stock with a can and done
I got a question, I have a 1997 ski doo mach 1, I am currently putting 136" rails and track in it, with 7 tooth sprockets, I am wandering what gears I should put in my chaincase? I believe currently stock in chaincase.
Hi, I am running a prormk 800 on trails I am getting engine temps up to 210 this is with scratchers down , do I need to be concerned? The engine light didn’t come on just seems hot, as soon as I get in the powder it drops temp 50 degrees... running 2” track
would love to see an objectionable review on the 07 Mach z 1000. the pluses and minuses. Nothing out there other than super awesome or shit...I just got one...my first ever toy but don't know shit as to watch out for.
BSMotoVlogs reed spacers clutch kit polish the heads triple the base gasket and make a sports exhaust. it'll be fast and if you do the work yourself you'll keep it under $100
I have a 1998 ski-doo mxz 700 and I want to turn it into a deep snow monster but I also want to use it on trails and go fast with it what type of parts do i need
Thanks!! I want to try that with my sled. its a 1999 zr700. A little old lol but its been awesome!!! I was thinking about putting some risers on the handle bars, and some decals. I know u specialize in skidoo and polaris, but i was wondering if u would have any clue on some modern or after market seats for not too expensive that wouldnt take too much work to modify it to fit on the sled Thanks soooo much!!!! :-)
I have an 06 crossfire 600 I can't find jack shit for after market parts do I have to get them custom? I would like to know quick so I can have it all ready for riding season thanks
i got some vforce 3 reeds for my 600sdi renegade, i was talking to some people and they say the product is not worth it and doesnt do much, do you agree? or are the worth it?
Louis, I've got an 03 rev 440 chassis I'm getting a zx 800 then I'm going with rktek 827 big bore I'm 6'4" 260lbs I want to build my sled up like your rev to have fun in deep powder. I'm kinda new to all this but i know what I want! Is there anyway you can send me or comment me a list of parts to buy. My bestfriend has a 05 440/800 swap and I really just want to beat him in 660ft drag and catwalk it in the powder. Thanks, Chris from Michigan
I have a Yamaha 2006nytro 973 with the short track 121id like to switch out the 121 and take the long track from 600 center and get the gears from my vmax 700 how much of a difference in performance would this make???and has anyone done this?????
I had so much respect for you until I saw this vid and heard you say evans will protect against overheating. the only good evans does it protect you from boilovers.
someone answer me im gearing my 2006 500ss adrenaline downto top 21 and puttin a inch and 3 quarter sno cross track on her thoughs anyone it is also the sled i ride on my channel
i wish i could have my own youtube account and not use my brothers girlfriends but i gotta say in my words, i wish i could work for you when i grow up.
7 year old video but I still watch it every year when I start to play with my sleds
3:16 I can't stress this part enough. I just installed a clutch kit on my 2013 Ski Doo Summit Sport 600, after riding this sled the last 8 winters it is hands down my most favorite upgrade. It makes a HUGE difference when it's dialed in with better springs, helix and clutch weights. Shoutout to Dynamo Joe from iBackshift 👍
1 sticker = 5 mph
What if I wrap it
He keeps calling that thing an older sled. Mines a 1988 Indy 500. Reminding me how poor I am.
88 indy is a great sled, use what you have with a smile on your face:)
That's what I got
singedcarry nice to see others still riding Indy's
I got one 1987 Indy 500 f/c, it is my kid’s sled it is a champ and bullet proof!
I have a 79 yamaha exciter 440
I think you should make a easy mods video for fan cooled engines
You sir, are a cool old man.
adam baller lol his in his early 40s
Older sleds? I must be older than I thought, My sled is a 1992 Arctic Cat Prowler and runs fantastic, heavy as hell! But fun
unreal man!! awesome videos very helpful information !!
Love you videos your very skillful at this
Thank you very much!
if you want, you can make an exhaust out of a cherry bomb from AutoZone. works just as good as any expensive sport exhaust
Man all these are expensive for me I have less than 50 dollars
Love your videos bro
Thanks Andrew
Quality! When your good, your good! Plain and simple! To many assholes thinking they can use old tac to shut down what we love
hey have you ever heard of 'LINE X' spray on box liners? what do you think about getting A arms sprayed with that stuff? it would be durable as hell
@ tony johnson i own a550 94 ext panther. those are specifically for trail riding,not draging or ditch banging or anythin like that. anyway. i blew it up so i took the 550 out and had it professionally bored and honed now its a 580 i had to put it on hold from other projects,but i'm goin to put a new primary and secondary clutch in it. a performance Y pipe, a performance exaust and a can. then obviously give it a good tune up and after thats all done. look into a good track. but i guesss this all depends on your budget.
Louis,
Great vids brother! When is the Elan series coming?
yey sled vids are coming!!
Louis, I have a '11 ski doo 800 TNT...what do I need to do to go from my stock 120" track to a 136" like you mention in this video...is there a kit? Price$? Thanks, love the videos!!
It's all about the turbo man😂
You cant put a turbo on a carbed engine???
John Kozak yes you can
Jc vents are for newer sleds. Couldn't find much for arctic cats
I was looking for an exhaust can for my 2008 polaris iq shift when a learned that rather of gaining power you loose some because the back pressure of an aftermarket can is reduced too much. Also some says that you sacrifice relieability. I'm really confused and i wanted your opinion on that subject. Thank you!
Louis I have a 2005 gsx 600 limited any pointers on what I can do with it any places I can find good cheap extensions for the track? Love the vids to keep them coming!!!
What seat kit do u have on this sled? I have a 2003 rev 600 that I wanna put a seat kit on and was wondering which one would be best?
Where would you get a turbo from ??
I have a 96 600 Ski Doo triple. one of the cylinders is constantly fouled out compression across all three are good wasn't sure if a valve would cause that or not carburetors for just rebuilt
William Chyba use iridium plugs
I just got a 93 arctic cat wildcat 700 it's really heavy and the only thing is there's not much I can do for weight reduction I would like to do some mods to it to make it faster but I still can ride trails
Is this a RT? I bought a renegade RT this winter. But the combination of being front heavy and low at the belly, it causes it to ride the belly as much as the skiis which i dont like. and second, id like a tighter ski stance, do you have any recomendation on A-arms? or perhaps a small lift in the front will cause the skiis to come a bit closer together? Thoughts?
Where do u get the mesh for your venting? It looks awesome!!! You should do a how to video on how to make ports and where u should locate them :-)
I got it from a fabric shop, it is screening for doors
Hi. Great video and very helpful. What is your opinion on lift kits? or should I just buy a newer skid?
check out tracks usa to see - they might have what you need .
What’s a good website to buy mods from such a turbo and stuff like that
Hey Powermodz just wondering what can do you have in there. I have the RK tec 700 Engine rev SDI. I ride mostly trail so It can't be too loud. Just wondering what you think. I don't want to lose performance. Your input would be greatly appreciated thanks. Also where did you get that seat.
My 2009 Polaris 600 155 performs well but I’ve noticed even in mild weather, it likes to foul its plugs although it is fuel injected. Would my fuel injectors need to be reprogrammed? The clutches have flatland weights in them
You should really do a video for moding old sleds, I have a 94 v-max an i know it sounds kinda dumb, but I really wanna mod it, on a budget. I have no clue what to do or where to start. I'am starting with putting a longer track and thats it.
PowerModz would you buy a Polaris 340 Indy and make it a mountain sled, and if you would could you even make one, I think it would have to little power for the big hills and or trails. It would be a good little play sled though just think about it
it takes allot of money for little gain and often it just takes power from here and adds it there To keep your sled having wide paramiters leave it stock with a can and done
I got a question, I have a 1997 ski doo mach 1, I am currently putting 136" rails and track in it, with 7 tooth sprockets, I am wandering what gears I should put in my chaincase? I believe currently stock in chaincase.
You were talking about switching the track length how can you do that?
watch more of my vids- i put longer tracks on everything.
hey, how did you flash your computer to change it from trail?
send to skidoo race dept.
Cameraman pisses me off
So annoying..
Can you tell me what seat setup you used on this rev? I have an 07' Rev XRS 800 and love your choice could you tell me please.
Hi, I am running a prormk 800 on trails I am getting engine temps up to 210 this is with scratchers down , do I need to be concerned? The engine light didn’t come on just seems hot, as soon as I get in the powder it drops temp 50 degrees... running 2” track
would love to see an objectionable review on the 07 Mach z 1000. the pluses and minuses. Nothing out there other than super awesome or shit...I just got one...my first ever toy but don't know shit as to watch out for.
what do you have to adjust to make the front end stand up easier
Limiter strap.
How does one make a 76 340 olympique preform better
BSMotoVlogs reed spacers clutch kit polish the heads triple the base gasket and make a sports exhaust. it'll be fast and if you do the work yourself you'll keep it under $100
How do you get in contact with the skidoo race team for mpem curving?
Where do you get your vents from
I have a rev 121 any thoughts on different suspensions may go to 136
I have a 1998 ski-doo mxz 700 and I want to turn it into a deep snow monster but I also want to use it on trails and go fast with it what type of parts do i need
PowerModz I just recently purchased a 2013 Polaris Pro 800 163" what things can you think of I can do to get the most performance out of it?
big bore, clutch kit.
How do I make my 1999 Yamaha 500 venture liquid cooled snowmachine go faster and run better
would the hood vents be practical for a trail sled?
getting the heat out is always a good thing.
How much does the kit cost?
ɷ I Haveeee Watchedddd Thiss Movie Leakeddd Version Hereee : - t.co/NdLgwVlw7a
A bay my
Bailey Lauzon
My sled has a M10 suspension, is that too heavy? I know its good for on a bumpy trail but how about off trail riding?
Thanks!! I want to try that with my sled. its a 1999 zr700. A little old lol but its been awesome!!! I was thinking about putting some risers on the handle bars, and some decals. I know u specialize in skidoo and polaris, but i was wondering if u would have any clue on some modern or after market seats for not too expensive that wouldnt take too much work to modify it to fit on the sled
Thanks soooo much!!!! :-)
youll probably have to mod one yourself, but check with wrp and boss
Thanks!!
where can i get a primary clutch for a 2007 skidoo summit x
I just recently got a 2015 800 Ski Doo Freeride and I need some aftermarket parts to make it perform and look better. Any ideas?
+Chyaboi Ry
put a sUUUUUPER Q on er and blow it up allways have it pinned to the bar and put 20 slp torque arms on it cuz u suck
I recently sold it just got a custom 2012 800 freeride turbo and a 2014 kx250f and some cash for the sled
what is up with the slow-moving location of the camera
No idea - was a slow day maybe
What monitor is that on the handlebars?
did you ditch your sway bar ?
yes
I have an 06 crossfire 600 I can't find jack shit for after market parts do I have to get them custom? I would like to know quick so I can have it all ready for riding season thanks
How big of a job is it to gear down your sled
What kind of oil do you use in that sled
i got some vforce 3 reeds for my 600sdi renegade, i was talking to some people and they say the product is not worth it and doesnt do much, do you agree? or are the worth it?
Louis, I've got an 03 rev 440 chassis I'm getting a zx 800 then I'm going with rktek 827 big bore I'm 6'4" 260lbs I want to build my sled up like your rev to have fun in deep powder. I'm kinda new to all this but i know what I want! Is there anyway you can send me or comment me a list of parts to buy.
My bestfriend has a 05 440/800 swap and I really just want to beat him in 660ft drag and catwalk it in the powder. Thanks, Chris from Michigan
I'm 12 and I made a skidoo 450cc and like what I do and could make my self a four wheeler or dirt bike idk it might be better to buy one
if i put evans coolant in my sled do i have to change anything or just drain the system and dump it in 2001 mxz 600
+kx5 xtr just follow my instructions and thats all you have to do.
thanks
Any advice in clutching
I have 1998 Polaris Indy 500 and it's really boggy and it has really low compression what should I do?
Draiden_the Beast rebuild it lol anything under 90 psi is dead
Oh is 94 octane high octane gas in usa? in sweden 95 is low and 101 octane is high
hes in canada, and yes its is high. just get some octane boost then
drive down to your local airport and buy some av fuel
lol
how do you do in canada/usa with the newer sleds, because it says 95octane or higher on the fuel lid on my 800e-tec?
***** probably isnt a requirement here.
I've got a 2010 polaris rmk 800 155" and I was thinking about putting a chip in it. What to you guys think ?
+thatoneguy Like a potato chip?
Does anyone know part numbers to the added motor mount?
Hey powermodz were you located we should meet up and hit some back country
... Older sleds, and this guy has an élan?
Gravy Garage but its only a tunnel now lol
where can i get a snow sock can you give me a link i cant find one
what is that thing that is on the handle bars with the screen.
Ethan Richert gps
What do you do for a rotary engine
nice one !
I have a Yamaha 2006nytro 973 with the short track 121id like to switch out the 121 and take the long track from 600 center and get the gears from my vmax 700 how much of a difference in performance would this make???and has anyone done this?????
Ment 600venter
any advice for a 1998 Polaris 700 xc?
I had so much respect for you until I saw this vid and heard you say evans will protect against overheating. the only good evans does it protect you from boilovers.
Ok!
how do you pull the engine
someone answer me im gearing my 2006 500ss adrenaline downto top 21 and puttin a inch and 3 quarter sno cross track on her thoughs anyone it is also the sled i ride on my channel
powermodz you should build a 1999 polaris indy 500
What can i do to my 2000 yamaha phazer 500
Volvo miääs bar risers and clutching
@@aussiehonchar3606 Have done already.
i cant find those snow socks anywhere :[
How can I put risers on a old skidoo
Look it up u fuck
+Tyler Tomashowski thanks
Fuck u up it look!
You should mod a 1978 Arctic cat jag
Good tips but one big advertisement
keep it up
anyway I can add more power to my 04 380f legend gt? lol
pretty tough:) just ride it and have fun!
how can i make my 1983 yamaha srv fast
how????
I'm sorry, but adding AvGas is only going to end up fouling plugs... Spend a couple more dollars on some VP fuel and save your sled!!!
Dude, my sled was free, my budget is in the negatives for mods at this point
Then just ride and enjoy!
At this point I’m removing the seat for weight reduction
Dependable, fast & cheap. Pick 2 because you can never have all 3 at the same time. Period.
i wish i could have my own youtube account and not use my brothers girlfriends but i gotta say in my words, i wish i could work for you when i grow up.
I almost didn't watch this because of a chevy equinox ad. I can't stand another JD Power bullcrap commercial
James Erickson we all gotta pay the bills eh. Thanks for watching!
over heating.... rookie should of bought a arctic cat
lol, thanks for watching!
PowerModz ;)
Does he ever stop talking?
no, I never stop.....you're welcome.
Yo my skidoo is a Yamaha 600 classic 2014 could get a better one and
almost???? my 86 mx ripps arseholes right out of revs..... 1986 yip its a time machine XD