Dont copy other trends Set your own style Those handles are on everything I would get the original an sink it into the door Or just a smooth clean shave Pop tge doors via remote Even suicide the entire door
I never saw a car tubbed exactly like that but man it looks amazing.That will be one incredible Mustang when you're finished. Thanks for sharing your ideas with us.
Vtune outstanding progress on the Mustang! I really like the rendering and it looks like you are well on the way to complete the the artists vision! Ben you and Yuri collaborate really well. It is rare to see welds as good as Yuri does. Keep up the great work and I am looking forward to the next video!
The side view looks freaking awesome! Don't stop your creation no matter what someone says. There is nobody other than you who can shape your vision. Your imagination and your ideas are amazing. When you get a sort of burned out, try collaboration videos with someone. It will be a good refreshment for you. I am looking forward to see your collaboration with two Porsche projects: 23rd boys and Dang sauce boys.
One thing I learned with POR is to get the mini 6 pack instead of the quart. The other thing you want to do to keep the lid from sealing to the can from paint that gets in the grove is to use saran wrap over the can and then install the lid.
I think the fact you throw in a basic vehicle to get fixed and flipped is great, keeps everything real.. Once you start buying nothing but exotic cars or crazy expensive cars/trucks you lose a few viewers who will never be able to afford such things, me included lol.. Stay safe my friend.. Everyone loves a good Fab job 👍
looking dam good! you need to get Prescription Safety Glasses. i used to grind and weld with my regulas glasses but started to get pretty expensive to get a new pair every few months :D.
great work! only thing i see is that you could be using some weld through primer. not sure if its important or not. i would also consider drilling some access holes so you can fit a sprayer wand inside to spray rust proof inside the cavities. then you can rubber plug the holes.
You’re really doing a great job on this project. I’m glad you got some really good help to come along and advance your vision for this 66 Stang Thang! ❤
If the old Jack is losing pressure @0:40, don't throw it away. you can add new fluid and bleed the air and it will be good as new. Give it to your brother. That new jack is pretty cool. I could not believe the price. @3:10 I was expecting it to be much more than a hydraulic floor jack. A 3 ton floor jack is usally $150 and the air jack was less. I may get me one of those.
You may want to wield a small piece of 1/4” round bar in the middle of your rear wheel well, because that seam on the middle of the original rear wheel well is for strength. Looking good can’t wait for the paint.
Sometimes it is a huge moral booster to have someone come in and help you. Taking on a big project can be overwhelming at times and you think you'll never see the end of it but then someone comes in to help and you realize you're catastrophizing and it's ask in your head. You got this dewd.
Ben and Yuri both of you have done a stellar job on the metal fab so far. The Mustang is going to be awesome when finished. The artist rendering's looked great. Ben you have done a lot of hard work designing the Mustang. Keep it up can't wait for the finished product. ❤
Tell your brother he the man for coming through to help out from Car Revive I love the team work and I would recommend you and him work together more often you'll get more done... and that wheel well is look ooooowwww-weeeee damn good !! better than the original.. I already follow him but I'm not sure if I seen any of his content yet but will definitely check out his current projects!!
You guys should do this every few videos anyways, it helps keep u motivated and you each have your specialties, thx for the hardwork keep it up looks great
POR 15 is phenomenal. I've had it on my 2002 Chevy Silverado 4x4 frame for about 3 years now and I'm in the salt belt. Paint looks as good as the day I put it on. Love the "23rd" on the car.
That's awesome, yeah good to get help on the body it will get done faster 👍🏻 and the bead roller is great need to mount it and could put a electric motor on it with a foot pedal 👍🏽 looking great
great to see you using a bead roller, does make a lot of difference, makes panels look professional, you'll have people asking where you got the parts, were they pattern etc - nice work Ben and broz, great for you to get some assistance for once, keeps you motivated which i know you sometimes have problems with, me too, so fully understand
This build is coming along awesome Ben I can't wait to see it painted. Hopefully you get mark to paint it and hopefully mark goes back to your dads workshop
Looks awesome man keep up the good work. Excited to see the end result. Take it from a North Dakotan use por 15 and weld through primer. 👍🏻 don’t let the haters get you down. They’re just mad cause they’ve never done anything worth talking about. No one’s perfect and we all start somewhere.
The artist designs look amazing! I saw one of them you posted on your Instagram story and just looking at it got me excited about how it will look once all finished. Been following along with this build since you started and I'm looking forward to seeing the finished car. It looks awesome in the white.
Coming along. I was hoping your previous wide body attempt would workout but I guess you just decided to go another way. It would've been cool to have an old Mustang with a wider body without the wheel moldings and side skirts but it was an ambitious attempt.
Great work MR T. (Hey boy i said hey boy !!) Leave one side stock and plain white and the other full custom in pearl white with the stripes for promo/show vehicle.'' V tuned customs''. Your young you've got years to finish it.
Wow. Looking good. Been following this build for what seems like close to a year. It's starting to take shape finally!! Can't wait for this one to get paint and see what it looks when it's finished!
You should drill a few holes in the underside of this side skirt, just to be sure that if water enters (it will happen !...) it will then find it'd way out. Rust in classic cars is very often the consequence of water standing still in a piece of metal...
And even if i'd had to repot to you by some unknown circumstances my accomplishements, you wouldn't belive.....so i think that's your answer (much more than you deserve)
Eastwood makes a POR15 competitor, called 'Rust Encapsulator' I think. Since you are sponsored by Eastwood, you should contact them. They have a whole line up of rust solutions and chemicals for repair\installation. Eastwood is the bomb!
I got lucky and scored some POR-15 at a discounted price due to dented cans! Be sure to use a plastic bag when putting the lid back on, or good luck getting the lid off after
Hope you add holes to allow moisture out of that rocker. Also, they Por 15 is great, but using a bit of weld-through primer in areas not covered will allow all your work to last longer. Great work and design, just take your time to make it right.
the start of the video there when ben throws the jack out the door. that was priceless! that made the video. as for the car its really coming together! im glad youre welding everything properly and using the por 15 is wise! that stuff does miracle! keep up the good work!
Another killer video! The Maclaren build was fantastic, but this mustang build is so dope! The air jack is a game changer and a killer price. Really like your style.
Good solid work. The only thing I’d say is that the profile of the side skirts looks a bit too square. The doors and quarters curve in a little at the bottom and the new stuff goes straight up and down so the curve is lost.
Looks like you put the wheel well in the factory location which is good. But personally, I would’ve put a rear end in there, with the same spec wheel and tire I’ll be using, and work around the wheel, to mount the inner-fender wheel well.. just so it’s it’s in the perfect spot, and you can accommodate for wheel travel when you hit those massive pot holes 😅 awesome job so far, this is gonna be sick 👍
Hey vtuned Ben and brother 23 Garage very nice welding job on car and very nice job on 1965 ford mustang gt coupe v8 coyote engine and 6 speed manual transmission very nice good looking car be back road very good paint job brother Paul love support number one vtuned and 23 Garage and Motörhead co 👍👍👍👍👍👍l love like watching videos you tube show car very good job on ford/dodge/Nissan/ very nice good building on car
nice work / plan against the rost. Do it right and have fun for a long time with it. Great work, this will be a nice Mustang. I love to watch you working with metal you are a artist.
I wish vtuned retrofitted this mustang instead of copying what b is for build does would be fun seeing a perfect restomod of this mustang together with goonzquad camaro.
I really like what you've done with the wheel tub, skirt, and rear fender extension. That overlapping strip with the screws is a great method. I will likely use that myself in the future.
A set of Kindig door handles would just bring this build to the next level. They aren’t that expensive and give the profile the cleanest look.
Dont copy other trends
Set your own style
Those handles are on everything
I would get the original an sink it into the door
Or just a smooth clean shave
Pop tge doors via remote
Even suicide the entire door
I never saw a car tubbed exactly like that but man it looks amazing.That will be one incredible Mustang when you're finished. Thanks for sharing your ideas with us.
Cause all the pros do it the right way !!
Vtune outstanding progress on the Mustang! I really like the rendering and it looks like you are well on the way to complete the the artists vision! Ben you and Yuri collaborate really well. It is rare to see welds as good as Yuri does. Keep up the great work and I am looking forward to the next video!
The side view looks freaking awesome! Don't stop your creation no matter what someone says. There is nobody other than you who can shape your vision. Your imagination and your ideas are amazing. When you get a sort of burned out, try collaboration videos with someone. It will be a good refreshment for you. I am looking forward to see your collaboration with two Porsche projects: 23rd boys and Dang sauce boys.
One thing I learned with POR is to get the mini 6 pack instead of the quart. The other thing you want to do to keep the lid from sealing to the can from paint that gets in the grove is to use saran wrap over the can and then install the lid.
I dig the style of song at 12:00. Good time lapse vibes
I think the fact you throw in a basic vehicle to get fixed and flipped is great, keeps everything real.. Once you start buying nothing but exotic cars or crazy expensive cars/trucks you lose a few viewers who will never be able to afford such things, me included lol.. Stay safe my friend.. Everyone loves a good Fab job 👍
looking dam good! you need to get Prescription Safety Glasses. i used to grind and weld with my regulas glasses but started to get pretty expensive to get a new pair every few months :D.
great work! only thing i see is that you could be using some weld through primer. not sure if its important or not. i would also consider drilling some access holes so you can fit a sprayer wand inside to spray rust proof inside the cavities. then you can rubber plug the holes.
You’re really doing a great job on this project. I’m glad you got some really good help to come along and advance your vision for this 66 Stang Thang! ❤
Check Out The Vevor Air Jack bit.ly/3tfTlWm
Check Out The Vevor Auto Collection bit.ly/3htYyHH
First link is Porn Buddy 😂
I know how you measured the 5 1/2" hehehehe
why does the first link take me to a dating site?
If the old Jack is losing pressure @0:40, don't throw it away. you can add new fluid and bleed the air and it will be good as new. Give it to your brother. That new jack is pretty cool. I could not believe the price. @3:10 I was expecting it to be much more than a hydraulic floor jack. A 3 ton floor jack is usally $150 and the air jack was less. I may get me one of those.
Nobody wants to talk about what was on the lift? 😮
The nice Ferarri? Nope,didn't see a thing.
The progress on this car has been amazing lately, thank you for staying interested and pumping out all these videos in short time you are the man!
You may want to wield a small piece of 1/4” round bar in the middle of your rear wheel well, because that seam on the middle of the original rear wheel well is for strength. Looking good can’t wait for the paint.
Sometimes it is a huge moral booster to have someone come in and help you. Taking on a big project can be overwhelming at times and you think you'll never see the end of it but then someone comes in to help and you realize you're catastrophizing and it's ask in your head. You got this dewd.
I'm pretty sure they make pneumatic punches for sheet metal. It takes 0.1 seconds to make a perfect hole with no distortion.
Ben and Yuri both of you have done a stellar job on the metal fab so far. The Mustang is going to be awesome when finished. The artist rendering's looked great. Ben you have done a lot of hard work designing the Mustang. Keep it up can't wait for the finished product. ❤
You are rockin… looks great. You will be amazed yourself when the paint dries.
So glad to see you got some help. This is a great project. I felt bad when you started getting overwhelmed with it.
Nice vision for the exterior of the Mustang. But don't forget to make the interior just as amazing!
Gunmetal with black! De-chromed. It would look so good! Make that rear side vent practical too! Funnel some air into those big brakes.
Tell your brother he the man for coming through to help out
from Car Revive
I love the team work and I would recommend you and him work together more often you'll get more done... and that wheel well is look ooooowwww-weeeee damn good !! better than the original.. I already follow him but I'm not sure if I seen any of his content yet but will definitely check out his current projects!!
yuri and nate thanks for helping your brother,that wheel well was transformed by artist that looks sweet progress looking good great video.
You guys should do this every few videos anyways, it helps keep u motivated and you each have your specialties, thx for the hardwork keep it up looks great
Can't wait to see the finished build! Hope the wheels that came of did not get a lot of scratches
Just go watch Casey's custom, basically the same build the cars look the same
It's fun just to hang out in your shed (I don't have one) and watch you and your team trying new things.
POR 15 is phenomenal. I've had it on my 2002 Chevy Silverado 4x4 frame for about 3 years now and I'm in the salt belt. Paint looks as good as the day I put it on. Love the "23rd" on the car.
That's awesome, yeah good to get help on the body it will get done faster 👍🏻 and the bead roller is great need to mount it and could put a electric motor on it with a foot pedal 👍🏽 looking great
Loving the build! Can't wait to see it in completion!
That's badass wheel wells at least it has some . Next year are you going to have this bad ass build a SEMA ? The best video in months.
Wow, that’s all I can say. I absolutely cannot wait until the next installment.
*Can't wait to see this once it comes out of paint* 👀
Ben, this mustang is so sick. The metal fab you've done alone is just amazing!
great to see you using a bead roller, does make a lot of difference, makes panels look professional, you'll have people asking where you got the parts, were they pattern etc - nice work Ben and broz, great for you to get some assistance for once, keeps you motivated which i know you sometimes have problems with, me too, so fully understand
This build is coming along awesome Ben I can't wait to see it painted. Hopefully you get mark to paint it and hopefully mark goes back to your dads workshop
Looks awesome man keep up the good work. Excited to see the end result. Take it from a North Dakotan use por 15 and weld through primer. 👍🏻 don’t let the haters get you down. They’re just mad cause they’ve never done anything worth talking about. No one’s perfect and we all start somewhere.
The artist designs look amazing! I saw one of them you posted on your Instagram story and just looking at it got me excited about how it will look once all finished. Been following along with this build since you started and I'm looking forward to seeing the finished car. It looks awesome in the white.
Yuri my man! You make welding look so easy.
Coming along. I was hoping your previous wide body attempt would workout but I guess you just decided to go another way. It would've been cool to have an old Mustang with a wider body without the wheel moldings and side skirts but it was an ambitious attempt.
The blue rendering is fire.shoutout to the designer 💯
Great progress guys!! Car is Looking amazing!! Never see. Yuri so quiet lol
por-15 is a rust converter and will save the metal and the car, for the future of humanity. I can't wait to see this mustang finished.
man the metal work is looking great its really starting to come together
Awesomely done Nate Yuri and Ben. You are working up a storm on the Mustang. Thanks again for sharing your video and well done.
The "Stang" is looking good! Really good lines and good welding jobs.
Great work MR T. (Hey boy i said hey boy !!)
Leave one side stock and plain white and the other full custom in pearl white with the stripes for promo/show vehicle.'' V tuned customs''.
Your young you've got years to finish it.
Looking great! I think you and your brother work well together!!!!
I think it’s brilliant to youse brothers work together, the love youse have is fantastic
Don't worry so much about haters. As long as you don't start putting sauce on everything, I'm going to continue watching your videos.
your brother does some amazing work with the welder and i love how the mustang is coming along
Great brotherly bonding. Creating an awesome car.
Sky Blue Metallic would kill on that car
Wow. Looking good. Been following this build for what seems like close to a year. It's starting to take shape finally!! Can't wait for this one to get paint and see what it looks when it's finished!
You should drill a few holes in the underside of this side skirt, just to be sure that if water enters (it will happen !...) it will then find it'd way out. Rust in classic cars is very often the consequence of water standing still in a piece of metal...
When you speed up Uri's welding he looks like a robot.
Go Uri!
Wow! This jack or lift is amasing!!!
Personally I'm more of a fan of keeping it more original, but everyone's different so good for you for the progress so far.
Kinda liked the jack throwing and the 23rd Logo at the end, on the car
I think by march 2024 this car will be done 😁
What will you have accomplished by 2024?
@@ccuellar6212 surely don't have to report to you my accomplishments 🙄
And even if i'd had to repot to you by some unknown circumstances my accomplishements, you wouldn't belive.....so i think that's your answer (much more than you deserve)
Let’s hope it’s some form of educational completion. That sentence structure and grammar leaves something to be desired.
@@ccuellar6212 keep your hopes for your life, not for mine
But hand pumping all day long gives you big muscles 💪🤔😏
Eastwood makes a POR15 competitor, called 'Rust Encapsulator' I think. Since you are sponsored by Eastwood, you should contact them. They have a whole line up of rust solutions and chemicals for repair\installation. Eastwood is the bomb!
I got lucky and scored some POR-15 at a discounted price due to dented cans!
Be sure to use a plastic bag when putting the lid back on, or good luck getting the lid off after
Love the progress on the mustang, if your using the gold wheels then in my opinion the car needs to be black then colour match the wheels for stripes
Good job if you get any haters ask them to show their work that they designed from scratch cos it's easy to criticize sitting and watching.
I think you do some awesome stuff. I would have made wheel wells like I learned watching Bad Chad.
Hope you add holes to allow moisture out of that rocker. Also, they Por 15 is great, but using a bit of weld-through primer in areas not covered will allow all your work to last longer. Great work and design, just take your time to make it right.
amazing welding from 23garage the work on that Mustang is looking sick Mate...can't wait to see both side done!!
the start of the video there when ben throws the jack out the door.
that was priceless! that made the video.
as for the car its really coming together!
im glad youre welding everything properly and using the por 15 is wise!
that stuff does miracle!
keep up the good work!
Looking good. Yuri did a great job of welding those in. Can't wait to see this thing on the street.
Another killer video! The Maclaren build was fantastic, but this mustang build is so dope! The air jack is a game changer and a killer price. Really like your style.
It looks good,getting better all time,sorry for teasing about front bumper,just being silly.latter really it's coming together.
I doubted your design but you pulled it off. It’s looking good.
Man U guys work so good together awesome job guys
It really pays off being the person that can weld and/or paint. Everyone else preps (which sucks).
Never saw a jack like that before. Looks cool.
The progress on this is stellar! Really coming together! Good stuff dude!
Your brother (Yuri) sure can lay down some dimes! Great job thus far...looking good Ben!
That gray with black wheels looked nice
the more and more it goes the better its looking each video!
Good solid work. The only thing I’d say is that the profile of the side skirts looks a bit too square. The doors and quarters curve in a little at the bottom and the new stuff goes straight up and down so the curve is lost.
you should use “steel it “paint. its awsome. i use it on my trailer. it works in wheel well and any chips on powder coat
Looks like you put the wheel well in the factory location which is good. But personally, I would’ve put a rear end in there, with the same spec wheel and tire I’ll be using, and work around the wheel, to mount the inner-fender wheel well.. just so it’s it’s in the perfect spot, and you can accommodate for wheel travel when you hit those massive pot holes 😅 awesome job so far, this is gonna be sick 👍
keep working on the Stang, it's looking great!
You should flip the jack stick to make the valve up when you raise the car they will be easy to use not under the handle.
Hey vtuned Ben and brother 23 Garage very nice welding job on car and very nice job on 1965 ford mustang gt coupe v8 coyote engine and 6 speed manual transmission very nice good looking car be back road very good paint job brother Paul love support number one vtuned and 23 Garage and Motörhead co 👍👍👍👍👍👍l love like watching videos you tube show car very good job on ford/dodge/Nissan/ very nice good building on car
this stang is gonna look great! Ben Block Edition.
Looking good glad you have family to help can't wait to see it done
Please finish the Build Ben!!👍👍👍🇵🇭
This is awesome build
A new VTuned video...let's go!
nice work / plan against the rost. Do it right and have fun for a long time with it. Great work, this will be a nice Mustang. I love to watch you working with metal you are a artist.
Damn it’s looking GOOD! Can’t wait to see how it turns out, you’ll definitely have one of a kind!
This whole time I was thinking the other side has been matched. Great work though!
i love the way your brother tagged his company on your pillar of the mustang lol 23rd garage baby yeah ben does that make you 24th?
Probably one of the best videos about the mustang.
Keep going!
I wish vtuned retrofitted this mustang instead of copying what b is for build does would be fun seeing a perfect restomod of this mustang together with goonzquad camaro.
I really like what you've done with the wheel tub, skirt, and rear fender extension. That overlapping strip with the screws is a great method. I will likely use that myself in the future.
Crazy thought, make the fender flares bronze to match the wheels
OUTSTANDING WORK ON THAT CUSTOM MUSTANG SO FAR!!!!