Wow, that young man’s sheet welding ability is second to none! He’s easily as good or better than any fabricator I’ve seen on TH-cam, including Fitzee. Props!
Good to see you and Ben working together again, the mustang is looking pretty good. Coming along nicely. Nice seeing the shop finally coming together, nice and clean and more efficient now, good to see it decluttered and organized. Great job guys.
That bead roll makes the structure look good, lots of rigidity too. Love the way the wheel well is finished, no compromise ! Hope you have a great week end.
When Yuri & Ben collaborate the do some outstanding work! You Guys should work together and make this Stang the most amazing Mustang to hit the road! If you wanted to make this car go one step beyond put a 2015 or newer Mustang independent suspension rear end under it! It solves your rear brake needs as well! That would make this car drive so much better than any old Mustang ever thought of driving! As always I am looking forward to the next video!
Bead rolling actually gives a lot of structural strength without realizing it; a V shaped bead roll in the center of that panel would have made it even stronger, however what you did will work fine. Great video! keep Orange Crushing It!
This widebody is going to be amazing in the end. Just caught up on B is for Build widebody Mustang and think this will be much better long term vs their fiberglass one.
Well blow me down. I am gob smacked at what Ben and Yuri have achieved I that wheel arch. Looks OEM. 👍🏻. You cannot get demotivated now Ben. Your brothers are there as back up. They will all use their talents to make this one off Mustang turn heads. 👏🏻👍🏻. Just wait until Paul puts his mark on the paintwork.
I like the beed roll. Really looks good. If it were me I would put RINO bed liner in the wheel liners. It would help with road noise and keep it from rusting. Love the sheet metal work.
Love the welding job. The bead rolling is awesome. I always wanted one. Making floor panels I use steel and hammer to form my strengthening beads. Works fine but I am now half deaf from constant pounding. You guys rock. Love your videos. Keep up the fantastic videos.
All of you are so talented,I’m sure your parents are so proud of you,especially your dad.beautiful job on all the welding on Ben’s mustang.great team work.with you working in your shop and helping your brother.great video.keep doing what your doing.😎😎😎👍👍👍
Ben is cut and weld before seeing if it's going to work, memories of his first mustang frame, Nate is voice of reason, and Yuri is just the boss, welding pro....
Gotta give you guys some credit, you’ve taken on a massive task there with all the fabrication that’s going to be required. Can’t wait to see the end result.
Great idea to get the rear end in tire width and suspension brakes clearances set up then the wheel flares. That would suck if the flares didn’t fit the tire width.. but it is looking good now y’all got to teach Ben to weld 😇
Some nice work being accomplished there fellas , I like it when someone takes an already nice looking car and making it even better but most importantly how they want it to look …nice work 👍
A great channel for learning metal forming and fabrication is Karl Fisher at Make It Kustom. Cool guy, extremely talented and an excellent teacher. Dont have thousands of dollars of special tools, no problem, he shows how to utilize normal tools and how to make your own!
Thanks for the brother's in action video. Yuri never a dull moment with you in the mix. Ben your Mustang is taking shape and the camera man is awesome. Paul are you hitting the gym. Peace guy's.
I am sure you'll finally wear eye protection as soon as one of the "gang" has to have a splinter of METAL removed from their eye... I KNOW< I DID IT!!!
I don't think you boys have ever done a bad job really .you just get people that couldn't do the work you boys do if thay tried thay just got nothing better to do but criticise every one else.anyway Ben you just keep doing what you are doing matey because you doing alright 👍👍👍🙏🙏🙏
Hey 23 Garage helps brother vtuned Ben on 1965 ford mustang gt v8 coupe coyote engine and 6 speed manual transmission very nice good looking car back road one time car be show car very nice good job on car love support number one Vtuned and 23 Garage and Motörhead co
It looks good don’t worry about the comments some of us are just hater’s keep up the good content Vtune . Oh yeah can’t forget about 23 garage . I like the that Porsche you’re working on . Vtune family
so glad to see Ben got a bead roller, excellent idea, one i suggested a while back, but sure you took no notice, i don't mind, really, this will easily increase the strength of flat parts and generally make them look way more professional and with Yuri's electric gluing (welding) will look so smart - pee sout too ! hehe
Wouldn't it better to have the right rims and tires that you want on the car first, and then build the flares around them? That way, you are sure that rims and tires will fill in the Wheel Well nice and tight. This is very important for the stance and the way the car looks for wide body cars. .
Yuri, where did that accent come from? Oh, well, we always knew 23rd would be a "work in progress" sort of thing! Ben's "Stang is getting more interesting- moving metal is what you have always done, I would expect you to figure it out pretty fast. And the home shop is looking good bro- don't blink, or it will all go back to wherever it gets left next. When will ya'll do the plane? Haven't heard a word on that - just seen the pieces in the yard. FR
Its good you look after each other. How does it work witrh your Dad as I assume he owns the Shop, do you rent it from him? Great content the shop looks great too. Thanks from the UK.
I thought my phones speaker was going out at certain parts of the video. Oh yeah not to jinx y'all but please wear eye protection when grinding. Just in general, in the shop wear them for GP
If you want to support the channel directly here is our PayPal link www.paypal.me/23rdllc
You forgot to Pin this.
Thanks for the link
Thank you Yuri and Nate for keeping Ben on track
Wow, that young man’s sheet welding ability is second to none! He’s easily as good or better than any fabricator I’ve seen on TH-cam, including Fitzee. Props!
Wow thank you so much ❤️❤️❤️
It awesome to see Nate and Yuri helping Ben out. It is great to see family helping each other out. All of them do an amazing job. ❤🇨🇦
As an overly organized weirdo, I love what you guys have done in the shop! Looking forward to seeing it fully cleaned and refreshed
Good to see you and Ben working together again, the mustang is looking pretty good. Coming along nicely. Nice seeing the shop finally coming together, nice and clean and more efficient now, good to see it decluttered and organized. Great job guys.
That bead roll makes the structure look good, lots of rigidity too. Love the way the wheel well is finished, no compromise ! Hope you have a great week end.
You and your brother are doing a great job on welding them panels and tub and wide body kit can't wait till it gets painted
When Yuri & Ben collaborate the do some outstanding work! You Guys should work together and make this Stang the most amazing Mustang to hit the road! If you wanted to make this car go one step beyond put a 2015 or newer Mustang independent suspension rear end under it! It solves your rear brake needs as well! That would make this car drive so much better than any old Mustang ever thought of driving! As always I am looking forward to the next video!
Bead rolling actually gives a lot of structural strength without realizing it; a V shaped bead roll in the center of that panel would have made it even stronger, however what you did will work fine. Great video! keep Orange Crushing It!
👆👆Congratulation you've been among my shortlisted luck winners Text me 🎁.
ben ben ben, dont forget your eye protection when you grind and weld!
This widebody is going to be amazing in the end. Just caught up on B is for Build widebody Mustang and think this will be much better long term vs their fiberglass one.
Evertime I see Ben on your channel he seems to be putting on more weight maybe you should start calling him “Big Ben” 😂
Geez that high level skills Yuri right here. 👌👏
Well blow me down. I am gob smacked at what Ben and Yuri have achieved I that wheel arch. Looks OEM. 👍🏻. You cannot get demotivated now Ben. Your brothers are there as back up. They will all use their talents to make this one off Mustang turn heads. 👏🏻👍🏻. Just wait until Paul puts his mark on the paintwork.
Nice work Yuri!! Ben’s reputation is at stake on this build. Please help him finish it !!
I like the beed roll. Really looks good. If it were me I would put RINO bed liner in the wheel liners. It would help with road noise and keep it from rusting. Love the sheet metal work.
Love the welding job. The bead rolling is awesome. I always wanted one. Making floor panels I use steel and hammer to form my strengthening beads. Works fine but I am now half deaf from constant pounding. You guys rock. Love your videos. Keep up the fantastic videos.
All of you are so talented,I’m sure your parents are so proud of you,especially your dad.beautiful job on all the welding on Ben’s mustang.great team work.with you working in your shop and helping your brother.great video.keep doing what your doing.😎😎😎👍👍👍
Great look Ben thx for letting us see it :)
Ben is cut and weld before seeing if it's going to work, memories of his first mustang frame, Nate is voice of reason, and Yuri is just the boss, welding pro....
Excellent support from you Yuri and keep supporting Ben until he finish it
I give it 3 days before all the wrenches are mixed up 😂
Noooo 😂😂😂
Awesome job guys I’m glad your helping your brother out ,it’s great to see you all working together!
im so pleased that he brought you into the mix to help weld and put in your two cents , i feel ben moves too fast
Top quality work happening here!! Love this old school build!
Amazing metal work amazing welds amazing ideas keep it up guys
That is one tough A$$ wheel well , should survive any burn out tire explosion , great job
Gotta give you guys some credit, you’ve taken on a massive task there with all the fabrication that’s going to be required. Can’t wait to see the end result.
Yuri……your skills are sick bro. Keep Ben motivated to finish this sick car please
That came out looking SICK great job on those inner fenders 👏🏼👏🏼👏🏼💪🏽
Amazing transformation and yes figure on the rear axles.
Great idea to get the rear end in tire width and suspension brakes clearances set up then the wheel flares. That would suck if the flares didn’t fit the tire width.. but it is looking good now y’all got to teach Ben to weld 😇
I love what you guys did with that wheel well
there's some very nice fabrication work on that car. I can't wait until it's finished.
Some nice work being accomplished there fellas , I like it when someone takes an already nice looking car and making it even better but most importantly how they want it to look …nice work 👍
Yep master welder....just saying.... love from Melbourne Australia 🇦🇺
Shop looks great! Reducing wasted movement and searching helps production 👍
Great video and clean lines and welding.😊
A great channel for learning metal forming and fabrication is Karl Fisher at Make It Kustom. Cool guy, extremely talented and an excellent teacher. Dont have thousands of dollars of special tools, no problem, he shows how to utilize normal tools and how to make your own!
I just can’t wait to see this finish, great job guys 👏🏻
Dude Paul has lost some weight
No more pizza and beer?
He does look sharp. Having kids will pack on those pounds, the dad too...not just mom.
Thanks for the brother's in action video. Yuri never a dull moment with you in the mix. Ben your Mustang is taking shape and the camera man is awesome. Paul are you hitting the gym. Peace guy's.
You and vtune make a good team keep up the good work vtune and 23 garage
By tomorrow those well organized Wrenches are gonna be mix 🤣
Beautiful look and work. Solid.
I am sure you'll finally wear eye protection as soon as one of the "gang" has to have a splinter of METAL removed from their eye... I KNOW< I DID IT!!!
Twice in my lifetime too, no fun...
Wow the shop clean
One thing it looks very nice you guys always do good work and it always looks good on the end so I like it
It’s a really nice work there, f-ck those hater’s, there are always somebody who is taking a shit on public
I don't think you boys have ever done a bad job really .you just get people that couldn't do the work you boys do if thay tried thay just got nothing better to do but criticise every one else.anyway Ben you just keep doing what you are doing matey because you doing alright 👍👍👍🙏🙏🙏
Hey 23 Garage helps brother vtuned Ben on 1965 ford mustang gt v8 coupe coyote engine and 6 speed manual transmission very nice good looking car back road one time car be show car very nice good job on car love support number one Vtuned and 23 Garage and Motörhead co
I was a little concerned in the beginning of this, but I must say it looks very nice. Better than I could ever do..
Great work guys. You all are so talented.
Someone may have had one too many cheese burgers 🍔
Really good improvement guys, way to go! And the work on Ben's wheel well is a big improvement.
Looks dn good. Keep up the great work guys.
Loving the brotherly love
Nice job !! The haters can eat Crow !! 😀👍🍺
Amazing work and content. You guys never stop amazing with the work that you do.
Awesome Fab work Yuri 👏🏼
Get goonsquad to buy the plasma cutter
Bloody fantaastic Maaate! Joe Australia
Yuri and ben i love you brothers
Really nice work. 🇺🇸
Ben, listen to your brothers. They're right.
You guys do amazing work
Cars looking mean
Love this channel! Patreon looms!
Great job! It’s coming along.
And as always screw the trolls
keep working on the next year sema winner 🤟 when working with fibreglass filler, use wax paper to smooth it out 👌you asked for a tip and a trick 😅
It looks good don’t worry about the comments some of us are just hater’s keep up the good content Vtune . Oh yeah can’t forget about 23 garage . I like the that Porsche you’re working on . Vtune family
Looks amazing
Great job 😃 check after a month lol
It looks incredible.
A very nice episode with such nice welding ! And the Workshop is clean and so much better to work ! And the music....amazing with this video !
so glad to see Ben got a bead roller, excellent idea, one i suggested a while back, but sure you took no notice, i don't mind, really, this will easily increase the strength of flat parts and generally make them look way more professional and with Yuri's electric gluing (welding) will look so smart - pee sout too ! hehe
Looks nice and fresh!
Wouldn't it better to have the right rims and tires that you want on the car first, and then build the flares around them?
That way, you are sure that rims and tires will fill in the Wheel Well nice and tight.
This is very important for the stance and the way the car looks for wide body cars. .
Yuri, where did that accent come from? Oh, well, we always knew 23rd would be a "work in progress" sort of thing! Ben's "Stang is getting more interesting- moving metal is what you have always done, I would expect you to figure it out pretty fast. And the home shop is looking good bro- don't blink, or it will all go back to wherever it gets left next. When will ya'll do the plane? Haven't heard a word on that - just seen the pieces in the yard. FR
I think it looks awesome 😊
looks good. progress
looking wery nice boys
Nice job.
Why didn’t you use the inner panel as a template for the other side ? Just sayin from Newcastle 🇬🇧🇬🇧🇬🇧👍👍
Top 👍
Love it thanks 😊 🙏
Good job 👍
Looking great 👍
tnx for the video
Nice!
Hey guys, i dont really like patreon and their policy. If u have a paypal account i will be happy to make a donation over there.
Fr. PayPal or Zella is better. It's direct & they don't take any money away from you.
I added it to the pinned comment
👌👌👌👌👌💯💯💯💯💯💯👍👍👍👍👍👍👍👍♥️♥️♥️♥️♥️♥️💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💝💝💝💝💝💝💝💝💝💝💝💝💝💝
Smashed it👌👌👌
great job : ))
Its good you look after each other. How does it work witrh your Dad as I assume he owns the Shop, do you rent it from him? Great content the shop looks great too. Thanks from the UK.
Cool
Post video on pax sideand installing axel tim
Like watching you guys! But the dumb accents drive me nuts!!
👍 It's always better to be yourself than to imitate someone else.
Neat work guys 👍👍
I thought my phones speaker was going out at certain parts of the video. Oh yeah not to jinx y'all but please wear eye protection when grinding. Just in general, in the shop wear them for GP