My 295/70/18 (34.5x12) trail grapplers rub the fender well liner at full lock. But I have the 2.5 inch level on my 2018. Only time they hit that plastic corner piece is in reverse sometimes. Kinda regret not going with the 3 inch kit.
Sorry I just saw these comments. Mines about a 1/4 to 1/2 inch lower in the front with the 2.5 inch kit. My passenger side front tire just barely rubs the sway bar and inner liner. The drivers side only touches the inner fender liner. I haven't noticed any rubbing on the upper control arm. I ran 285/70/18 ridge grapplers before and they didn't rub anything.
I have a ‘14 Silverado with a 3.5 inch rough country suspension lift and 305/55r20 on stock rims and they rub the cover at full lock. I want to put those 295/55r20 because they’re not as wide.
Do you like the factory mirrors or are you planning on upgrading to tow mirrors? I hate not being able to see my rear tires near curbs. Having offset wheels I wanna be able to see them.
Idk how much you paid but i bought a nice set of toyo open country mt 35x12.5x18 new for 2k they are rated to go 50-60k miles How about giving them a though when you look at tires, they have very nice tread pattern and ride smooth
2018 Sierra on 35” BFG A/T KO2, tires rubbing inside control arm, will 2” spacers stop this/ does anyone know if it will cause them to contact the fenders/wheel well etc?
I have a 2011 chevy silverado 1500 LT 2WD. i wanna install a 3" leveling kit in the front and buy some stock chevy rims 18" with 35 inch tires...so besides the rubbing on full lock turns this will not be a problem? Also would wheels spacers aboid the rubbing??
“unless your a tacoma boi”🤣🤣
I used to be one so i can make these jokes lol
4s and 5s would look so good man. i know it’s hard to spend the money but man id love it!
THE BEGINNING ,THE BEST PART OF THE VIDEO! 👍
Freaking awesome !
Went with a Kanati 275/65/20 their 34.2" tall with stock wheels and 3" lift. Only rubbing in on the UCA's at full lock.
My 295/70/18 (34.5x12) trail grapplers rub the fender well liner at full lock. But I have the 2.5 inch level on my 2018. Only time they hit that plastic corner piece is in reverse sometimes. Kinda regret not going with the 3 inch kit.
Anthony Fogner u ever rub on control arms? I was thinking about doing 285/75/18
Is your truck still lower in the front with the 2.5?
Sorry I just saw these comments. Mines about a 1/4 to 1/2 inch lower in the front with the 2.5 inch kit. My passenger side front tire just barely rubs the sway bar and inner liner. The drivers side only touches the inner fender liner. I haven't noticed any rubbing on the upper control arm. I ran 285/70/18 ridge grapplers before and they didn't rub anything.
I have a ‘14 Silverado with a 3.5 inch rough country suspension lift and 305/55r20 on stock rims and they rub the cover at full lock. I want to put those 295/55r20 because they’re not as wide.
Excellent camera work👍
A different set of stocks and this setup would be sick
Snowflake 20’s!
Hey if you can’t laugh at yourself then what’s the point?
exactly lol
I’m gonna put some 35x11.50s on my leveled Silverado. If you trim enough, the 11.50 wides will fit.
How did it work out?
BAC great actually. My truck has 18” Z71 wheels, 35x11.50 trail graps. I had to trip the inner fender quite a bit but it clears 100 percent.
@@bcjdwbiernfjherwfbowfib do you have a picture? Thought about doing the same
I got some 33 rdr tires on stock 20s so far so good. Only a little rub on the upper control arm.
Hi have you ever used wheel spacers and what are your thoughts on it? I’ve been considering 2” spacers but idk.
Yes- I am interested too, about that on stocks (20 snowflakes)
Cliff's: No they don't fit on a "leveled" truck, it rubs on this "squatted" truck that has the front higher than the rear
Do you like the factory mirrors or are you planning on upgrading to tow mirrors? I hate not being able to see my rear tires near curbs. Having offset wheels I wanna be able to see them.
Yes I upgrade to Tow mirror to see my tires with the huge offset
Did you do any trimming or cutting?
Idk how much you paid but i bought a nice set of toyo open country mt 35x12.5x18 new for 2k they are rated to go 50-60k miles
How about giving them a though when you look at tires, they have very nice tread pattern and ride smooth
Do you think a 20x10 with a 275/65r20 with a 2.5inch level?
My 06 rubs barely with a 6inch with 35 12.50s on 18x9s on the drivers side
Do u think I can run 315 40 26 on a 2015 Silverado wit a 2.5 leveling kit
BTW love your vids your one of the only true tubers that off-road
2018 Sierra on 35” BFG A/T KO2, tires rubbing inside control arm, will 2” spacers stop this/ does anyone know if it will cause them to contact the fenders/wheel well etc?
3 inch front now you need a block to level the back up again
what tail lights are those? and is it an lt or ltz?
i am thinking about getting 33s 34s or 35s which should i go with. They will be MTs, Also prefere cheap mt. Great video bro keep em coming
35s. 33’s look alright on 99-06, 35s give a lot more aggressive look though
@@jacobn3160 thanks for the help
That_04_Fisheye depends on your rim size. I got 22’s with 34’s and they look amazing
Kolby Guillot I got 16s and thinking on 33s or 34s
If you ain’t tucking, you ain’t thuging
I wonder what will happen with spacers
Slim S I run 1.75 inch bora spacers and 295/60 stock 20s and I don’t rub and full lock .. check out my instagram Brandon_Ervin52
I have a 2012 model, do you think it would do the same as yours?
Mud graps!!!!😂🤣😂🤣😂🤣
Street truck 35s are fine. Any flexing off road they will rub
when you said that piece will clear it self out , that’s wishing thinking my brother piece ripped off lol
315 75r16 would it fit a level 2016 silverado
So can I fit 35x12 on stock wheels with a 4inch lift on a 2016 chevy 1500?
I don't have a 4" or true 35s but i don't see why not.
@@lmfscrew Lol going to get the lift soon and wanted to see if I could them thanks thou.
I try to put 35x12.5 on my 2015 chevy dually and the tire guy said i will no fit right because is gonna rub..he said i have to trimmed a lil bit
@@juancabrera9319 hey how did the 35s fit with 4 inch lift on stock wheels
Tire size only matters when it matters screw... You and me can both agree???
DON"T DO IT 35'S RUB!!!!!
I have a 2011 chevy silverado 1500 LT 2WD.
i wanna install a 3" leveling kit in the front and buy some stock chevy rims 18" with 35 inch tires...so besides the rubbing on full lock turns this will not be a problem? Also would wheels spacers aboid the rubbing??
u didn't notice that ? cmon man lol anyways thank for the info
How would i notice it lol
35's rub on a 6 inch lift
always depends on your offset and tire size. A 295/ 65/ 20 wont rub on a 2.5" level
F150 on 35’s and it doesn’t rub
I have to wait, got a 6year 100k warranty.
Same
Get that negativity outta here
What level you got
Josh adams he has a 3 inch Motofab lift
Post the trucks in the gallery
Nice sticker nerd....that's something I'd do. Lol
If you had new tires with some tread they would rub
These have tread and i clearly said that in the video lol
Do 35s take away power
Anything above stock will affect the truck.
@@lmfscrew i run 33s now is it much different than 35s
Is your truck tuned
Think I could fit 24x14 on 35.12.50 on a 4inch lift on my obs chevy or im i gonna haft to go with 6inch
You'll need to go bigger
ight I thought so I really appreciate it love the vids man keep up the good work
6:17 my mouth watering while watching this vid
Why are these on Facebook? I dig the stocks on here....Just my opinion man.
Because they are for sale lol I like them too but the only reason i buy used setups is to make videos with them and then sell them.
Make me a deal on them! Haha I ain’t far from you according to fb.
those are 35s? look like 285’s in those huge wheel wells, go with 37s
Sup screw?
I’m assuming you’re the type of guy to get a big ass lifted truck just to drive it on the road
Well you know what they say about assuming.
lmfscrew it’s more so an educated realization. You don’t put wheels that will rub on something you take off-road and need clearance
Well if you think a truck with a 3" leveling kit is a "big ass lifted truck" you might need to re-educate yourself lmao
@@lmfscrew Holy... you just creamed that guy!
@@ieatslag5947_Now you sittin there lookin silly with no eligible response.. 😂😂🤡_
Tellem that
You think 35s would rub on 2.5 level
yes
Who cares bro you ain't going off-road anyway!!!
Plz get reps