Windshield Replacement and Repair
ฝัง
- เผยแพร่เมื่อ 15 เม.ย. 2024
- ✅ Subscribe To My Channel For More Videos: / @ayfoo_its_otis
✅ Important Links:
👉 If You Want To Support The Channel Visit My Online Store: ayfooitsotis.bigcartel.com/
✅ Stay Connected With Me:
👉 Instagram: / ayfoo_its_otis
==============================
✅ About Otis Dixon:
Subscribe and buckle up; it's a wild ride!
For Collaboration and Business inquiries, please use the contact information below:
📩 Email: Otisjdixon@gmail.com
🔔 Subscribe to my channel for more videos: / @ayfoo_its_otis
=====================
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research.
Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use
© Otis Dixon - ยานยนต์และพาหนะ
That ain't a window fitter, that's a brother with a gun 🤣
God bless
Trying to be funny makes you look stupid
Caulk gun, now repeat what i said, bc i said that shit in the wrong hood and only after did i realize. (I told someone ill give them a cock gun or cocked gun, big fucking difference lmfao)
Stop hatn stupid
bro who are you , Theo von ? 😂
Bros hands are more steady then my paycheks
God Bless You 🙏 have a wonderful day.
Don't forget to leave ALL the broken glass down there so when the next dude goes to replace the heater core he shreds his shit😂😂
😂😂😂😂
Took me tf out with this comment
Hahaha holy fuck
I've been a professional auto glass installer for almost 20 years and this hurt my soul. Cowl panel still on so it's going to be a stuff job. Round bead strung out. We can only hope he used the proper pinchweld primer to inhibit any rust.
God Bless You 🙏 have a wonderful day.
You normally remove the cowl? what's it get in the way or something? Pinchweld primer I do not know WTF that is. Round bead "strung out" I don't know WTF that is either but then again I've never done this. Dupont U-428. AH! Pinchweld is a type of welding? and you use this UNDER the bead if that's present? Well wouldn't one use it anyway I mean its cheap as hell...
Betaprime 5504G ?? Anyhow this goo likes sunlight and high humidity. AK.. not good. AZ not too good. FL very good!
Talk heavy, that bead needs a point & its fs gone leak were he stopped the urethane at.
Yep
36 years myself
Aye he gets business. And don't know if you know this or not, but not everybody has been doing it for 36 years and I can almost guarantee you haven't been doing it the exact same way for 36 years. There's always new stuff being added. Always new stuff you can do always new ways you can learn etc etc. Don't hate on this man. He's out here hustling. He's getting the money and if the customers are satisfied, you're s*** talking means nothing. I've been painting and doing handyman services for years and I don't knock people for doing something different or wrong.
Nice and steady :) I would have to walk around the car to get it done
God bless
It's bad
Cut a v on the tip to make a peak. It’ll spread neater
God bless you
Yes, this will maximize your seal. Help you out with leaks and whistling.
@@BigB.223prevent air bubbles getting trapped and ensure better adhesion than just putting the bead on loosely.
Not to forget, that would be like what the manual says, they train professionals to do and how they do it at the factory
@@alexanderkupke920 yep indeed.
God helps the seal with blessings.
Kid: I think you’re doing it wrong dad
Dad: shut up son I seen someone on TH-cam do it.
God Bless
Your are so right sir. That is a not how to video
😂😂😂😂
Round bead creates 2 points of contact. The reason you see installers cut a v in the tip and run against the install surface is so the glass presses into the tip of the V shaped urathane and spreads evenly without air into a square.
God bless🙏✊🏾✝️
That’s a neat theory but not required-“feel-good” club vibes that never has and never will be necessary. ❤
@@mygiftmatters very necessary to prevent air bubbles as well
You're a lame, everyone giving you pointers and You're ungrateful. This business won't last. Foo @@Ayfoo_its_Otis
That's how not to do😂
Cut a V on one side of the tip and put the tip directly on the windshield channel. It will prevent the potential of dropping the urethane on the dash and interior and also creates a ridge of urethane which creates a better seal when the glass is applied. Keep up the good work🤙🏼
God Bless You 🙏 have a whonderful day.
Nice round bead to make sure it leaks . Repeat business is key
EVEN THOUGH I WALK THROUGH THE VALLEY
OF THE SHADOW OF DEATH, I WILL FEAR NO EVIL.
PSALMS 23:4
Coolio said it better.
God bless water leaks.
@@Ayfoo_its_Otiswhich demon f*cked you?
God bless
He did not have a razor to v out nozzle 😂
This is how to glue your headliner to your windshield properly
God bless 🙏✝️
Phenomenal😂🎉😢
never ever see this technique.not enough glue for windscreen
Not its not
А такой же только белый есть?
I was in the auto glass business for 31 years, retired in 2004. I was in the business when urethane sealants were first used to set windshields. I am very impressed with this man's skills!
God Bless You 🙏 have a wonderful day.
I worked in a RV factory installing windshields. That is by no means how you want to caulk. Bet that windshield leaks next time it goes through the car wash.
God Bless You 🙏 have a whonderful day.
And while turning around a tight corner it will pop loose
Yeah really he could've cleaned out all that broken glass before he started to caulk!
Matthew, that’s insulation not glass
I hate Robots
This is not how you lay down urethane.
God bless you
Totally not the way a professional would be doing this .
Why? Is it supposed to be dimed down?
It was good
@@PonkyKongaccording to about any manufacturer of the glue and how they do it on original assembly you are supposed to use a v notched nozzle that lays a triangle shaped bead on the primed (looks like that was done) metal, so it spreads evenly and without trapping air. Also you are not supposed to just let it float and drop down, but lay it directly onto the metal with the nozzle, to prevent air bubbles again and get good initial contact.
Laying the bead on only loosely like this might result in bad adhesion and water ingress.
Looks like it will blow away in the wind before the glass gets near it 😂
God bless
Had 7 years in the glass industry, kinda glad I’m not doing it anymore, cause I’ll probably be the one that would get sent back to fix stuff like this and dealing with an upset customer. 🙏🏽 god bless
God Bless You 🙏 have a whonderful day.
Very impressive doing that standing on one side of the car. Very nice work!
God Bless You 🙏 have a wonderful day.
So you're the one that keeps making me more customers.
God Bless
Everything that's wrong with the internet in one short clip. The blind leading the blind.
God Bless🙏✝️
@@Ayfoo_its_Otistell you god to kiss my 🍑
Elaborate
@@Ayfoo_its_Otisit's not god bless..... Is you misleading others to despair..... That's urethane , you had to "V" cut that nozzle , and prior to this you have to protect the part you don't work with....
@@Cris91CordyThe point of the god bless is the reason why you commented back. 😂 He stays positive no matter the negative comments so just let him do him and move tf on with yo life. God bless. 🙏🏼🙏🏼
Definition of bro reading all his 3k comments this man needs an award for being the best youtuber for actually careing about his fans.
😅✊🏾👋🏾 God bless
Just because it's skill doesn't make it sealed 😂😂😂😅😅 -xWINDSHIELD Tech
God bless🙏✊🏾✝️
I remember, I used to work at Honda car plant and one day, robot who was lying that glue was shut down. 20 plus people was needed to replace its work while mechanics were working on it.
God bless🙏✝️
Gonna sound silly, I worked at the Mercedes Benz plant and our robot did the same.. I remember correctly the robot puts the you urethane on the windshield .. primer goes on the vehicle frame
@@ASti_Spumante regarding the Glue both works. Primer usually is only needed on the metal. The glass, especially the black coating around the edge does not need to be primed. I have seen most often glue is put on the glas, as it is easier to move around the glas on a stand, than the vehicle frame. It seems it is easier to apply for a robot as well, as you can lay the glass mostly flat, which helps as well. And you can possibly get a way with a slightly smaller robot. Technically, if the glass is positioned and pressed on correctly, it should not make a difference.
I always put it with a v cut on the windshield and it works very well. This here is just "how not to do that"
God bless ✝️🙏
God bless ✝️🙏
Been a window technician for over 100 years, I can tell you this kid is still green
God bless
Thats a man that has several years of experience handling caulk
God Bless You 🙏 have a whonderful day.
You need to cut a v-shaped cut on that tip so the Silicon can have a peek a little higher than what you got there that's that's too round of a bead
EVEN THOUGH I WALK THROUGH THE VALLEY
OF THE SHADOW OF DEATH, I WILL FEAR NO EVIL.
PSALMS 23:4
Not silicon. Urethane. No way silicon has the holding power to bond a windscreen properly.
Betaseal is my go to. Sikaflex doesn’t seem to stand up in a v as well.
God Bless 🙏
It's automotive grade urethane and no silicone.
@Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaalalalalalalalalalalalalalalalalalalalalalalaaaaaaaa see see see see7 see,,W see❤😂🎉😢😮yfoo_its_Otis
I get the feeling that this video is designed to make the pro's angry and comment about how he is doing it all wrong.
God bless ✝️🙏
This js shit job
And he keeps spamming the same comment
You can tell homie isn't a smoker with steady hands like that,keep it up I like watching your videos, different and interesting
EVEN THOUGH I WALK THROUGH THE VALLEY
OF THE SHADOW OF DEATH, I WILL FEAR NO EVIL.
PSALMS 23:4
Whether it’s right or wrong, my hands aren’t as smooth as yours and I respect the boldness you need for this repair, God bless you man….. and you will be persecuted for doing what’s good not for the opposite haha it’s fun knowing you’re doing something when it causes hate 🙏🏼
🙏✝️✊🏾
Heck yeah.
I'd be wearing most of it trying it like that 😅 this is why I do bodywork and not install windshields
Пусть ребята работают. Другие заработают потом больше)
EVEN THOUGH I WALK THROUGH THE VALLEY
OF THE SHADOW OF DEATH, I WILL FEAR NO EVIL.
PSALMS 23:4
У нас таких ребят и не найти . Максимум в тюбетейках
Разве клей-герметик не на стекло наносится? Какая-то особенная технология у них?
@@my.binokular5283 не обязательно, можно по разному. Но вот валик не правильный.
@@my.binokular5283 можно и так. Валик только совсем не тот.
Bro smooth as hell👌🏻👌🏻👌🏻👌🏻👌🏻
✊🏾✊🏾✊🏾thanks. God bless 🙏
That was so clean, I thought a machine was doing the work for the first 10 seconds.
God Bless You 🙏 have a whonderful day.
Thanks for the tip 👍🏽 now I know who not to go to 🙏🏽
God bless you✝️🙏🙏
How to tell me you have no idea what you’re doing without telling me you have no idea what you’re doing… 🤣
God Bless You 🙏 have a whonderful day.
@@Ayfoo_its_Otis aye keep up the work man . Everybody works different.... Your clients are happy. That's all that matter.
@@leedempster4743but if it's wrong bro we should correct homie. Nobody can take criticism anymore, just jump to butthurt. There's tricks to the trade he doesn't know yet, hopefully he gets there, but he won't with people like you feeding him bullshit. Be genuine with the guy, he will appreciate it much more in the long run js
Guys, i think he do this for the first time 😂😂
An evil man is trapped by his sinful talk, but a righteous man escapes trouble.
- Proverbs 12:13 -
@Ayfoo_its_Otis you're arrogant if you think your right when people want only to help you....😅
@@Ayfoo_its_Otis Congrats about your imaginary mate in the sky.
@@Manu-Official Christ changed my life dramatically. He is definitely real ❤
@@mygiftmatters How did your imaginary sky mate change your life?
Im a professional glass installer for the past 35 years and I have to really say that this video on youtube about installing car glass window this video right here! especially this video in particular! this video out of countless useless video that get posted every single day on TH-cam is a honestly a true example of why im not a glass window installer.
I Love God, Jesus Christ
The & Spirit.
I am God Bless You 🙏 have a whonderful day. proud to say that.✝️🙏✊🏾
At first I was like you madman, then I was like hang on a minute and then I was like go you good thing. What ride, the hi's, the lo's, this film had everything
✊🏾God Bless You 🙏 have a wonderful day.
Is this even English
Should clean out all the broken glass first🤔🤔 maybe he will like the rattle 🫣 and you are suppose to press it against frame so it bonds..
@@beenrudy actually IDGAF I can afford glass insurance and have it professionally done🤡 sorry as an adult a comment hurt ya feelings on a comment page🤔🤣
EVEN THOUGH I WALK THROUGH THE VALLEY
OF THE SHADOW OF DEATH, I WILL FEAR NO EVIL.
PSALMS 23:4
i never seen a single piece of glass only fiber insulation or whatever! says alot about you when u hate on someone for no reason
@@Seabass1206 so since you didn't see it that makes it right... STFU 🤡🤡 actually I dgaf I can afford glass insurance and get it done professionally... Why be mad? My window ain't screwed up.. and sorry that as an adult a comment hurt your wittle feelings🤡🤡🤡
Press against the frame so it bonds surely the new glass will press it all in and will bond ??? Don’t be a hater you know my man was slick wid it ❤
When i had mine done the bead was literally a 1 inch tall peak. I was amazed on the amount put down
God Bless You 🙏 have a wonderful day.
1 inch tall peak with a v notched tip doesn't sound unreasonable if you had a large windshield. Maybe a work truck or tractor, perhaps. Dumbstruck, etc.
CLEAN AF. Keep up the work brotha
God Bless You 🙏 have a wonderful day.
That one hand handling is amazing, really 😮
God bless
Bruh that's gotta be the best bead I've ever seen! 👌
God bless
Um, this is 💯 wrong. Read the damn tube 😅
God didn't have anything to do with this@@Ayfoo_its_Otis
Да, это круто, только в России делают по другому почему-то, а так, заебца!)
This is sarcasm right? Lol
From reading the comments about the gasket type of formation, i have to say, i would still trust you to do mine, and i would still use your technique with just a few adjustments. Bravo sir. Good work.
Thank you 🙏 God bless
In Europe we put the glue directly on the windshield. Interesting 👍
God Bless You 🙏 have a whonderful day.
We did as well when I worked in a bodyshop. Over 30 years and this is the first time I have seen urethane applied to the car instead of the windshield. And we always v grooved the tip after we warmed the cartridges.
The two things i wont touch on my cars are alignments and windshields. Nicely done!
Thank you 🙏 God bless
Your corking skills are unbelievable 😊
I read cooking at first 😂
God bless
Why do I want to crack my windshield just to support bros business!😂
God Bless You 🙏 have a wonderful day.
My boy precise af with it 💯
God Bless You 🙏 have a wonderful day.
Yeah the glue should come with instructions, im not saying you're wrong but. God bless
Thought it was a damn machine doing this😂 flawless💪🏽
🙏
With a steady hand like yours, you’d be a great installer!
One technique for a longer-lasting installation: I did install quite a few windshields on BMW’s, and glue always goes on the glass first.
1. Use an adhesion promoter called a primer on the window frame and glass before installing
2. Cut a V in the tip and make a sharp peak with the glue on the glass like a mountain top.
3. Overlap glue slightly where the start meets the end.
This guarantees even spread, good adhesion, and no leaks.
Good luck!
God Bless You 🙏 have a wonderful day.
This guy is good.👍👍
God Bless You 🙏 have a wonderful day.
Bro, got talent
God Bless you
Horrible lmao 🤣 you need to be trained the right way.
God bless you
Not how I’ve seen it done, but could work in theory. Like to see the finished job with the wind shield installed
God Bless You 🙏 have a whonderful day.
I dont do this everyday either but based on the comments i know this dude has GREAT prices!! 😅
EVEN THOUGH I WALK THROUGH THE VALLEY
OF THE SHADOW OF DEATH, I WILL FEAR NO EVIL.
PSALMS 23:4
Hella trust in ya self for not covering the dash 💯 good work
God Bless You 🙏 have a wonderful day.
I have done plenty of replacements without covering the dash. It's pretty easy to not mess up.
You did a good job on putting the sealer most likely urethane as a retired windshield installer myself I wanted to see him actually put the glass in by himself like I used to not hard to do if you know what you're doing
God Bless You 🙏 have a whonderful day.
So that's how it's done? That is a man who knows his skills right there.
God Bless You 🙏 have a wonderful day.
No. No it isn't.
I own an auto glass shop, that's not how it's done, have some one teach you how to do it correctly, you could become good at it
Probably couldn’t have done that in my prime. Impressive skill and speed.
God bless
I mean he laid the bead just fine. Pretty consistent, I would not recommend starting like this but more power to you my man!
God bless
Dammm that was clean asf 🔥thats right
God Bless You 🙏 have a whonderful day.
That has to be the best laid bead for caulking a windshield I've ever seen.
God bless
Bro, you did a great job.
God Bless You 🙏 have a wonderful day.
Thats good bead pal. God bless you also my friend
God bless
That was clean af man, and i have machines doing that.
God bless
Good stuff man its hard making yourself out here
God Bless You 🙏 have a whonderful day.
Something relaxing about that glue got me watching it more than thrice...😅
God Bless You 🙏 have a whonderful day.
That is amazing brother! That bead is better than what the robots do at the factory! Mad respect 💯
God Bless You 🙏 have a whonderful day.
This is the guy you get when you are looking for the cheapest
God bless
I have had to do this with the cheapest, standard caulk gun before. My brother and I are both big and strong and were taking turns squeezing out the adhesive.
I now have a heavy duty applicator and laugh when I think back on what we did.
God bless
Hey God Bless you man keep at it you inspire to do great.
Thanks, you too!
That's a sturdy hand u got there👍
God bless
Making it look easy !!
God Bless You 🙏 have a wonderful day.
not bad bro, i’m so sorry for the losers hating on you, but you’re doing a good job.
God Bless You 🙏 have a wonderful day.
Looks like you’ve done that a time or two. Amazing
I Love God, Jesus Christ,
The & Spirit.
I am proud to say that.✝️🙏✊🏾
Never seen it done like this, but call the same guy. Looks nice and even. Make that money💪
God Bless You 🙏 have a wonderful day.
Good job bro!! Laid that glue clean asf!!!
God Bless You 🙏 have a whonderful day.
@@Ayfoo_its_Otis you too brother
God damn skill right there 💯 🔥
God bless 🙏✝️
Professional keep up the good work
God Bless You 🙏 have a wonderful day.
Heck yeah, a hatd working black MAN!!!
God Bless You 🙏 have a wonderful day.
That’s the best black caulk control I’ve seen (say it out loud)
God Bless You 🙏 have a whonderful day.
SATISFYING. Liked and subbed!
God Bless You 🙏 have a whonderful day.
This is that “this is all I’ve done since high school” skill set
God bless🙏✊🏾✝️
damn, that was clean AF.
God Bless You 🙏 have a whonderful day.
Appreciate this fam. I need to do my car.
God bless
That man has skill.
God Bless You 🙏 have a wonderful day.
Damn that was art work!!
God Bless You 🙏 have a whonderful day.
This my 4th front window install video today definitely boutta have a broken ass window this week 🤦♂️😂
God Bless You 🙏 have a whonderful day.
This is why windshield leak after getting a new windshield installed. This guy just hoped and prays the butly sealant seals the new windshield . In fact if you don’t smush down the gasket with your fingers you chance a small air bubble inside the butly tube . Which you won’t notice until you have a moldy musty smell inside your car . Great job
God Bless You 🙏 have a whonderful day.
Superb control. I thought it was done by machine
God Bless You 🙏 have a wonderful day.
Thanks. I did my first windshield this way also with a circle bead and had no issues whatsoever, no leaks etc. The comments are so foolish as if a V bead is superior which it really is not-the claim is that V uses only “one point of contact” but it actually risks more chance of porosity because you have to lay the profile of the V down in order to mate the first point of contact. The whole theory and teaching behind it is actually really flawed-especially when you pay to learn such a foolish technique. God is with you Sir, stay blessed. ❤
God Bless You 🙏 have a wonderful day.
Master 👍
God Bless You 🙏 have a whonderful day.
Yes sir!!! Nice and clean
God Bless You 🙏 have a whonderful day.
Dude u r doing better job than a tesla robot manufacture
God Bless You 🙏 have a whonderful day.
Damn, i remember the days of the manual gun and not being able to make a fist by the end of the day. And installing glass without a helper. You have it so easy.
God Bless You 🙏 have a wonderful day.
I'll do it myself, the right way, thanx!
God bless
Beautifully done
God Bless You 🙏 have a wonderful day.
Finally, the BBC everyone keeps talking about. Big black caulk 😂
God Bless You 🙏 have a whonderful day.
@Ayfoo_its_Otis And you as well my man 🙏🤙🏽
He looked very unsteady at first but amazing at the end he knew exactly where the glue was going
God Bless You 🙏 have a whonderful day.
This guys doing the good old Safelite salute! Wipers up baby lol
God Bless You 🙏 have a whonderful day.