The more information and products you put out for this swap, the more I can't wait to do it!! All the extra benefits of Comfort, legroom, storage and upholstery options make me REALLY excited
Genius! You got me excited again! When I finish replacing my intake manifold. I need to order! My driver seat been broke for many years now. It's time!
Man I am glad I found this video. I have a 2000 and a 2014 Silverado and I love my seats in the 14. They are exactly like the 1s in your video. Was thinking about selling the 00, but after seeing this I may just give it a refresh. Love how simple you make the brackets. Thanks for not only posting, but for building the needed hardware.
Awesome work. My 95 suburban seat bracket has been welded already once and my electric wiring is trashed. Time to look for a new set of seats and looks like my options just got much larger! Ty
Just did an install with these brackets. I installed new carpet at the same time, the carpet was plush with mass backing and jute. I added another layer of jute beneath. My truck also has rear floor vents. Fitment of the brackets were off by a bit, but not insurmountable. 1) my thick carpet caused a problem with starting the front bolt on the passenger side inner bracket. This was solved with a longer bolt to start it and then replacing it once both front and rear bolts were sunk. 2) on the same passenger side inner bracket, seemingly unrelated to the carpet thickness, the rear gusset on the bracket interferes with the floor vent cover. This was solved by removing the cover and leaving the vent open. I am sightless disappointed that I didn’t realize this earlier because the carpet hole could have been cut tighter around the vent. These are my install tips.
I appreciate the feedback. I do disclose in the ad: Please note that brackets may interfere with the floor heat vent duct on trucks & SUVs equipped with this and may need to be modified with a heat gun to allow clearance.The GEN 3 are 15.5" wide compared to the factory seat frame at 13.5". Typically keeping the floor duct with some mods is not an issue with GEN 3 unless there is a lot of carpet padding then that needs to be removed to allow clearance. I go over the duct deeper on the GEN 5 video which is a problem because the GEN 5 are 17.5" wide and the duct needs to be cut or removed. .
@@OBSOutpost Thanks for the reply. I think the product is fantastic. Just giving my tips for the installer who might be reading replys! By the way, do you have any 2nd row swap solutions for suburban?
@@AngryDogPerformance No brackets needed for the 2nd row on Suburban. You will need to get a piece of tubing for the rear to make it level and then just drill new holes once you get the seats squared up. This is for 2007-13 2nd row captains 2015-2020 are flat and dont need any rear riser. I have not tried doing a bench but it should mount he same way
Awesome work and engineering 🤙🏾 ordering some for mine soon, could i make a request to make the mounting plate/bolt that goes under the truck magnetic?
all seats come from wrecked trucks so check your local dismantlers/junkyards. also check FB marketplace, craigslist and offer up. OEMseats.com is a good place that sells near-perfect used seats. eBay is also a great place, do a radius search 50-100 miles from your location, most of the high-end dismantlers list the seats.
@@OBSOutpost Have you checked the dealer for theses seats..also get part numbers and piece together parts and pieces..im sure you can still get the covers and foam from the dealer.. .
go to our store, www.OBSOutpost.com here is a link to the seat brackets: obsoutpost.com/shop/ols/products/gen-iv-seat-bracket-201415-2020-gm-trucksuv-seats-to-88-9899-00-gmt400
Do you make back seat brackets as well? Looking to do a full seat swap in a Crew Cab, and I'm sure Tahoe guys have thought the same thing. Killer stuff though, amazing work.
@@Blitz0065 the back seats in my crew cab at least mount just like the bench seat in the single cabs bc mine has the exact same seat my single cab had in it until I put bucket seats and console out of a 04 Silverado in it.
@@OBSOutpost buying a 1995 GMC extended cab truck and I’m definitely doing the gen 4 front and back seats at some points. I’m excited for this whole process of going to the junkyards and looking for the right truck to grab the seats from and taking them out, to the install to the obs.
I send out the wiring diagram when customers get the brackets. The heat and cool are PWM controlled so there is no easy way to hook that up. you will need the factory modules and switches.
Not yet but plan to have it done real soon. GEN 5 are the easiest because they just bolt to the brackets, no rivets to drill. Then they install the same way as all other brackets.
@@OBSOutpost awesome thanks that’s a relief! Just got gen5 seats and currently saving up for your brackets now. 1 more question is your special install tool the same for center console and front seats?
@obsoutpost Received my brackets and just modified the seats etc. what 3 wires are used to power the power driver seat on these Gen 4’s? Big solid black is ground? Big yellow/red is power? And third wire?
I enjoyed the video you’ve done a good job explaining all of it. One thing I wanted to ask is if you could do a video on the seat wiring? Like which wires are needed because I know the power seats have a larger connector with multiple wires that won’t get used..
Unfortunately the wiring for these sats is not universal. the pin location and wire colors change depending on what year truck/SUV and what options the truck or SUV had. Most all of the drivers side seats use the big red for 12v+ and big black for ground and then you need one other thin gauge wire for the memory bypass which gets 12v+. I have a diagram that may work or at least get you in the ball park that I can email you, send request to Dan@OBSOutpost.com
@@Gear_Banger the driver side will have the memory mode. Which is a tiny red wire with black stripe. You’ll want to cut that wire from the big plug and also cut the only 2 bigger wires at each end of the plug. One is black which is negative and the red big wire for positive. Take the positive wire and the tiny red wire with black stripe and twist them together and apply a 12v source to them and a ground to the black wire and that’s how you wire the seats to move them. For the passenger seat it’s just the standard big red wire and the big black wire and same thing apply 12v to the red and ground to the black wire
Im on your site and I have selected the brackets for my new 5 gen front and jump seat to go in my 99 ob's double cab. However, I can't see a bracket option for 5gen rear seats. Can you tell me if the 4 gen option from your site will work? I need to order ASAP. Thanks in advance for your support.
Its a shame you don't ship to Canada. This would make my swap so much more easier. I tried to order and got this message "We are unable to calculate shipping rates for the selected items.".
You wont be able to wire the factory heated seats. They work off the trucks BCM through CANBUS and send PWM signals so it not like wiring 12v. Simple fix is to get a $50 12v aftermarket seat heater and swap out for the original, you will never tell the difference.
Will there be a gen 4 extended cab back seats, also do you have any tips for upgrading the wiring for the newer power seats? I just bought a 98gmt 400 and upgrading a lot definitely will be buying gen 4 brackets from you
For a two door Tahoe, how much room do these brackets give for rear seat passenger ingress and egress. The right front factory seat bracket allows the seat to move all the way to the dash.
What are those things under the seats? Some type of module to get the seats to move forward and back? Or for the heated or cooled optioned seats ? would like to know what those things are, thanks. Once I find some seats I’ll forsure order these gen iv brackets for my OBS.
We just started doing rear seat brackets for ext cab and crew cab trucks. We also are doing rear seats to use as front seat in single cabs. Since there are many different styles of rears and we only do a few, its best to email pics of what you have and I can determine if we have a solution for you. the email is Dan@OBSOutpost.com
would these brackets match up to the floor console rather than the jump seat? there are nuts and bolts on the bottom that differ from the clips on the jump seat but would these still work?
You will need a bracket for the rear seat but it will depend on what seat your putting back there. We have the 2014-2018 Crew Cab rear seat in production and will be available on our website late next week. The 2014-2018 DBL Cab Rear seat is in R&D and will not be available until the middle of October. If you dont know what seat you have you can email me a pic to Dan@OBSOupost.com
We just finished the R&D and installed our first one. Ext Cab rear brackets are in production and will be available on the website late next week. If you have Instagram you can check out the photos here: instagram.com/p/CgsfXgiLuhT/
We got ya covered. You will need our GEN III Brackets: obsoutpost.com/shop/ols/products/gen-iii-seat-brackets-2007-201314-gmt900-seats-to-88-9899-gmt400
@@OBSOutpost Hello I have a 2014 extended cab rear seat, well this work in a 4 door Tahoe? Or do you offer a bracket to purchase? I see you have one that fit in to a extended cab truck.
@@erikcruz2888 I have not attempted this. Our Crew cab rear brackets may work. If you can send me a pic of your Tahoes rear floor I will be able to see if it will. Dan@OBSOutpost.com
Which ones are more comfortable to you? I always found my 98 Z71 seats were much more plush than the ones in the shops's 2014 Silverado where I used to work.
Not sure that a 24-year-old seat can compare to a newer style seat but comfort is a personal preference or maybe what you become used to. I can tell you that the GEN 4 Tahoe or Escalade seats are by far the best seat I have rode in. My 2017 Tahoe seats are 1000x better than the factory 97 ones. From an ergonomic standpoint, comfort, support, adjustability, and design. The side bolsters hold you when cornering and the deep seat really makes you feel locked in.
GM I have a 98 gmc yukon and wanted to know if the seats from a 04 Tahoe with rear bucket seat will those fit in my 98 Yukon or what I will need to make the seats work
@@isidrogarza8309 I do not make rear seat brackets. I do provide info on how to mount the 3rd row seat in a 2dr tahoe. I have not had any ext or crew cab trucks in the shop to see what's needed if anything. I was told by a customer that he just drilled new holes in his crew cab to mount the newer style rear seat. The ext cabs mount the side so I would think that the newer style seats would also need to be drilled and mounted to the floor.
GREAT PRODUCT... Installation kicked my ahh but I tried some shortcuts that probably caused it and better tools for the job would have helped! Great product and instruction videos though. The brackets do exactly what you instructed they would.🏌🏾♂️
Yeah I’ll be ordering a set or 2 or 5. Never been more in love with a single mod in my life.
The more information and products you put out for this swap, the more I can't wait to do it!! All the extra benefits of Comfort, legroom, storage and upholstery options make me REALLY excited
Hello I'm looking for a set for a 98 suburban.
So glad someone is genius enough to create these. I’ll be ordering very very soon! Time to go to a local junkyard to find some seats !!!!
Great idea and very nice products. Now we need a solution for the cracking dashboards!
Stay tuned that is coming very soon. Full dash swap for the DIY'er. one option will be based on the 2015 Cadillac SRX which can be obtained for cheap.
@@OBSOutpost that should be interesting
I'm anxious to get my seats in. I just ordered the set for my crew cab
Thank you
@@OBSOutpost I am definitely wanting to see what these seats look like in my truck
Genius! You got me excited again! When I finish replacing my intake manifold. I need to order! My driver seat been broke for many years now. It's time!
Man I am glad I found this video. I have a 2000 and a 2014 Silverado and I love my seats in the 14. They are exactly like the 1s in your video. Was thinking about selling the 00, but after seeing this I may just give it a refresh. Love how simple you make the brackets. Thanks for not only posting, but for building the needed hardware.
Can’t wait to do this to my single cab! Will order when ready!
Orderes these for my 2000 Limited and they got out beautiful. Highly recommend if you are thinking about swapping.
Thank you, I appreciate it. Post up some pics on insta or FB when you get a chance.
Awesome work. My 95 suburban seat bracket has been welded already once and my electric wiring is trashed. Time to look for a new set of seats and looks like my options just got much larger!
Ty
Just did an install with these brackets. I installed new carpet at the same time, the carpet was plush with mass backing and jute. I added another layer of jute beneath. My truck also has rear floor vents. Fitment of the brackets were off by a bit, but not insurmountable. 1) my thick carpet caused a problem with starting the front bolt on the passenger side inner bracket. This was solved with a longer bolt to start it and then replacing it once both front and rear bolts were sunk. 2) on the same passenger side inner bracket, seemingly unrelated to the carpet thickness, the rear gusset on the bracket interferes with the floor vent cover. This was solved by removing the cover and leaving the vent open. I am sightless disappointed that I didn’t realize this earlier because the carpet hole could have been cut tighter around the vent.
These are my install tips.
Also a tip on drilling the rivets, use an impact drill. About 4-5 min with a regular drill. About 30 seconds with an impact drill.
I appreciate the feedback. I do disclose in the ad: Please note that brackets may interfere with the floor heat vent duct on trucks & SUVs equipped with this and may need to be modified with a heat gun to allow clearance.The GEN 3 are 15.5" wide compared to the factory seat frame at 13.5". Typically keeping the floor duct with some mods is not an issue with GEN 3 unless there is a lot of carpet padding then that needs to be removed to allow clearance. I go over the duct deeper on the GEN 5 video which is a problem because the GEN 5 are 17.5" wide and the duct needs to be cut or removed. .
@@OBSOutpost Thanks for the reply. I think the product is fantastic. Just giving my tips for the installer who might be reading replys!
By the way, do you have any 2nd row swap solutions for suburban?
@@AngryDogPerformance No brackets needed for the 2nd row on Suburban. You will need to get a piece of tubing for the rear to make it level and then just drill new holes once you get the seats squared up. This is for 2007-13 2nd row captains 2015-2020 are flat and dont need any rear riser. I have not tried doing a bench but it should mount he same way
Great video. Looking forward to my seat replacements using this product.
Should do a video about the power seat operation. I have a Tahoe with power driver manual passenger and am curious how new powered seats would work.
thank you for taking your time to make these great informative in detail videos 🙏, we spoke on the phone i will be ordering asap.
Very informative video
great product i have a pair of them myself now i need those plates lol
Cool I always wanted a jump seat for my tagoe
Awesome work and engineering 🤙🏾 ordering some for mine soon, could i make a request to make the mounting plate/bolt that goes under the truck magnetic?
Dude...I need this for my 95 extended cab.
Ur doing gods work my friend. Question… where are u buying all these factory interiors from? I cant seem to source any
all seats come from wrecked trucks so check your local dismantlers/junkyards. also check FB marketplace, craigslist and offer up. OEMseats.com is a good place that sells near-perfect used seats. eBay is also a great place, do a radius search 50-100 miles from your location, most of the high-end dismantlers list the seats.
@@OBSOutpost thanks for the insight
@@OBSOutpost
Have you checked the dealer for theses seats..also get part numbers and piece together parts and pieces..im sure you can still get the covers and foam from the dealer..
.
Great idea. In my 88 C1500 I still prefer my custom done 60/40. I like less weight as well and other seats to damn heavy.
I wish you made this for my 2004 Yukon. I'd like to put newer in it
Looking for the coupon code in the description 🤦♀️
We wish
I’m glad I seen this and how much is the kits I wanna change my seats out
go to our store, www.OBSOutpost.com here is a link to the seat brackets: obsoutpost.com/shop/ols/products/gen-iv-seat-bracket-201415-2020-gm-trucksuv-seats-to-88-9899-00-gmt400
Do you make back seat brackets as well? Looking to do a full seat swap in a Crew Cab, and I'm sure Tahoe guys have thought the same thing. Killer stuff though, amazing work.
no bracket is needed for the rear seat swap
I'm looking at getting a Crew Cab and this was my EXACT thought. Gen 4 seats all the way around
@@Blitz0065 I figured we'd need brackets bc of the way they fasten and flip up but I suppose I'd have to look closer and how they mount lol
@@Ringer15 I don't have one yet so I didn't know. Just assumed Hahaha
@@Blitz0065 the back seats in my crew cab at least mount just like the bench seat in the single cabs bc mine has the exact same seat my single cab had in it until I put bucket seats and console out of a 04 Silverado in it.
Great video
Do you have brackets to swap gen 4 seats to gen 3 sierra crew cab!
th-cam.com/video/Cnj8gjhPQ94/w-d-xo.html
My question is what about the seat belts from the original obs to the new generation seats?
The OBS shoulder belt buckles to the new seats buckle release.
@@OBSOutpost nice!!!! Thanks
@@OBSOutpost buying a 1995 GMC extended cab truck and I’m definitely doing the gen 4 front and back seats at some points. I’m excited for this whole process of going to the junkyards and looking for the right truck to grab the seats from and taking them out, to the install to the obs.
Hope you have some Chevy dually stuff in mind
Is there a video that shows how to wire the power seats and heated and cooled seats
I send out the wiring diagram when customers get the brackets. The heat and cool are PWM controlled so there is no easy way to hook that up. you will need the factory modules and switches.
I have a 99 2 door tahoe was wondering would u be doing brackets to adapt gen 4 rear seats from a silverado or tahoe
you don't need a bracket, guys that order my seat bracket I walk them through how to install the rear
Do y’all have a video for Gen 5 seats swap into OBS Chevy single cab
Not yet but plan to have it done real soon. GEN 5 are the easiest because they just bolt to the brackets, no rivets to drill. Then they install the same way as all other brackets.
@@OBSOutpost awesome thanks that’s a relief! Just got gen5 seats and currently saving up for your brackets now. 1 more question is your special install tool the same for center console and front seats?
Is there a video about the wiring?
Ill probably do a separate video soon on just wiring but the wiring is simple, it's only 3 wires. I send out the diagram with the bracket orders.
@@OBSOutpost alright cool! I’ll be ordering some soon
@obsoutpost
Received my brackets and just modified the seats etc. what 3 wires are used to power the power driver seat on these Gen 4’s?
Big solid black is ground?
Big yellow/red is power?
And third wire?
Hey I have a 88 c3500 Silverado extended cab I was on your website but it didn’t specifically mention my set up
our brackets work with all OBS trucks
Did I miss information about the seat height difference? I'm looking to gain a little head room from stock.
Will the new seats come forward enough to access the back seat on a 2 door tahoe?
I have them in my 2dr and yes.
Didn’t see my question already asked, so will this mod take away from the room for audio equipment behind the seat in a single cab?
I enjoyed the video you’ve done a good job explaining all of it. One thing I wanted to ask is if you could do a video on the seat wiring? Like which wires are needed because I know the power seats have a larger connector with multiple wires that won’t get used..
Unfortunately the wiring for these sats is not universal. the pin location and wire colors change depending on what year truck/SUV and what options the truck or SUV had. Most all of the drivers side seats use the big red for 12v+ and big black for ground and then you need one other thin gauge wire for the memory bypass which gets 12v+. I have a diagram that may work or at least get you in the ball park that I can email you, send request to Dan@OBSOutpost.com
@@OBSOutpost ok thanks! I’ll do that. Just purchased some brackets today now gotta figure out the wiring.
@@Gear_Banger the driver side will have the memory mode. Which is a tiny red wire with black stripe. You’ll want to cut that wire from the big plug and also cut the only 2 bigger wires at each end of the plug. One is black which is negative and the red big wire for positive. Take the positive wire and the tiny red wire with black stripe and twist them together and apply a 12v source to them and a ground to the black wire and that’s how you wire the seats to move them. For the passenger seat it’s just the standard big red wire and the big black wire and same thing apply 12v to the red and ground to the black wire
@@christopherlee1006 thanks!
Nice job! What particular year and model are those seats out of?
The truck in the video used 2017 GMC Sierra Seats.
Im on your site and I have selected the brackets for my new 5 gen front and jump seat to go in my 99 ob's double cab. However, I can't see a bracket option for 5gen rear seats. Can you tell me if the 4 gen option from your site will work? I need to order ASAP.
Thanks in advance for your support.
I just emailed you.
How much room is there to ingress/ egress from the back seats on the club cab/ 2 door '95
there is a mod that I have a video showing how to get 24" clearance
Do you have a kit for 2020 gmc denali seat to a 2002 chevy 2500
Its a shame you don't ship to Canada. This would make my swap so much more easier. I tried to order and got this message "We are unable to calculate shipping rates for the selected items.".
We can ship to Canada, I just sent you an email with the shipping cost.
What rear seat would I use in my 4 door swap?
Will a single cab OBS with buckets and console have to drill the additional holes, or will the install be more like the Tahoe?
if you have buckets then no drilling needed
Have you installed any with the heated cooled powered seats? I don’t have my seats yet but wondering if there’s a tutorial on how to
You wont be able to wire the factory heated seats. They work off the trucks BCM through CANBUS and send PWM signals so it not like wiring 12v. Simple fix is to get a $50 12v aftermarket seat heater and swap out for the original, you will never tell the difference.
@@OBSOutpost what about wiring the power seats? Is that just as simple as splicing 2 negative and 2 positive words together?
@@rodaz9458 yeah the power seat functions are simple. 12v+ and ground
Will there be a gen 4 extended cab back seats, also do you have any tips for upgrading the wiring for the newer power seats? I just bought a 98gmt 400 and upgrading a lot definitely will be buying gen 4 brackets from you
extended cab rear brackets are available, here is the link. obsoutpost.com/obs-parts/ols/products/gen-4-extended-cab-rear-seat-brackets
we can send out the wiring diagram for the GEN 4 seats
Will the jump seat be in the way of a floor shift in a single cab ? 2014-2023
Thanks
no, done a bunch of them
For a two door Tahoe, how much room do these brackets give for rear seat passenger ingress and egress. The right front factory seat bracket allows the seat to move all the way to the dash.
This video goes over all the details: th-cam.com/video/2laQD11RhX0/w-d-xo.html
So the seats fit into your factory seat harness?
if you mean the seat belt then yes
about to do this-- i notice the brackets for the jump seat skews more to the drivers side, no issues with centeredness?
The trans tunnel is not center to the truck. Our bracket corrects this and centers the jump seat 100%.
I'm interested in purchasing a set for my 90 c2500 I don't see any way to order or contact you to place an order or pricing
website in the description www.OBSOutpost.com
What are those things under the seats? Some type of module to get the seats to move forward and back? Or for the heated or cooled optioned seats ?
would like to know what those things are, thanks.
Once I find some seats I’ll forsure order these gen iv brackets for my OBS.
Rockford Fosgate Power series amplifiers
I have a crew cab would these work for me ?
What’s some contact info I’d like to chat about this if possible
all 2014-21 seats fit a 1997 GMC sierra C1500 Extended Cab?
they use different brackets but yes they will all adapt
@@OBSOutpost which brackets would be those if you dont mind me asking?
What about seatbelts? Do the stock belts buckle into new seats?
yes they do
Do you guys have brackets for 1993 pickup seats out of 22 suburban 2nd row
We just started doing rear seat brackets for ext cab and crew cab trucks. We also are doing rear seats to use as front seat in single cabs. Since there are many different styles of rears and we only do a few, its best to email pics of what you have and I can determine if we have a solution for you. the email is Dan@OBSOutpost.com
When I read the title is assumed it backwards, obs seats in a newer truck, and was like "why would you want to ever do that?"
would these brackets match up to the floor console rather than the jump seat? there are nuts and bolts on the bottom that differ from the clips on the jump seat but would these still work?
@Dan Pettigrew i’ll try and get this emailed sent to you as fast as i can. my emails aren’t wanting to go though right now for some reason
Do stock seat belts work
Yes
Do I need a bracket for back seat in an extended cab for 2014 back seat?
You will need a bracket for the rear seat but it will depend on what seat your putting back there. We have the 2014-2018 Crew Cab rear seat in production and will be available on our website late next week. The 2014-2018 DBL Cab Rear seat is in R&D and will not be available until the middle of October. If you dont know what seat you have you can email me a pic to Dan@OBSOupost.com
Is there a rear seat bracket for an extended cab rear seat?
We just finished the R&D and installed our first one. Ext Cab rear brackets are in production and will be available on the website late next week. If you have Instagram you can check out the photos here: instagram.com/p/CgsfXgiLuhT/
@@OBSOutpost nice i been staring at my new rear seats for a year
Hey I have a 95 c1500 single cab and have some 07 seats I want to install. Is these the right brackets and where do I order them from
We got ya covered. You will need our GEN III Brackets: obsoutpost.com/shop/ols/products/gen-iii-seat-brackets-2007-201314-gmt900-seats-to-88-9899-gmt400
Do you make brackets for the back seats? Captains or bench for the obs suburbans or tahoes?
no brackets are needed for the rear. you just need to drill new holes
@@OBSOutpost gotcha thanks for the info! I’ll be ordering those brackets here soon. As soon as I find a decent pair of seats for my burban!
@@OBSOutpost Hello I have a 2014 extended cab rear seat, well this work in a 4 door Tahoe? Or do you offer a bracket to purchase? I see you have one that fit in to a extended cab truck.
@@erikcruz2888 I have not attempted this. Our Crew cab rear brackets may work. If you can send me a pic of your Tahoes rear floor I will be able to see if it will. Dan@OBSOutpost.com
so whats the seat belt options? keep the stock?
Keep the trucks seat belt and use the new seats buckle.
Would these brackets work for rear seats in a crew cab aswell?
no bracket is needed for the rear. you just drill new holes and add nut plates. obsoutpost.com/shop/ols/products/nut-plate
Which ones are more comfortable to you? I always found my 98 Z71 seats were much more plush than the ones in the shops's 2014 Silverado where I used to work.
Not sure that a 24-year-old seat can compare to a newer style seat but comfort is a personal preference or maybe what you become used to. I can tell you that the GEN 4 Tahoe or Escalade seats are by far the best seat I have rode in. My 2017 Tahoe seats are 1000x better than the factory 97 ones. From an ergonomic standpoint, comfort, support, adjustability, and design. The side bolsters hold you when cornering and the deep seat really makes you feel locked in.
GM I have a 98 gmc yukon and wanted to know if the seats from a 04 Tahoe with rear bucket seat will those fit in my 98 Yukon or what I will need to make the seats work
they will not bolt in, totally different mounts. We used to make the GEN 2 bracket but discontinued it a while ago.
@@OBSOutpost ok thanks
What's you location you do installs?
near Orlando FL
Would that fit my 93 gmc yukon
yes, they are designed to exact fit all 88-98 gm trucks/SUV GMT400
Thank you also do you make brackets for the back bench seat wonder if i can use same seats in the rear
@@isidrogarza8309 I do not make rear seat brackets. I do provide info on how to mount the 3rd row seat in a 2dr tahoe. I have not had any ext or crew cab trucks in the shop to see what's needed if anything. I was told by a customer that he just drilled new holes in his crew cab to mount the newer style rear seat. The ext cabs mount the side so I would think that the newer style seats would also need to be drilled and mounted to the floor.
What site do I visit
www.OBSOutpost.com
I read seac swamp .. that t fucked my brain up.
Does anyone have a coupon code???
I got a set from 2015(manuel seats) I want to put them in my 97 single cab. I’ll like them lower, will they with your brackets ? Thanks
Ok thanks. I appreciate your help
I’ll order them
Can you post pictures of your single cab with them installed on your Instagram? Thanks
@@davidfavela8276 just added a few of our customers 1997 GMC Single Cab
@@OBSOutpost just seen it , looks really good
GREAT PRODUCT... Installation kicked my ahh but I tried some shortcuts that probably caused it and better tools for the job would have helped! Great product and instruction videos though. The brackets do exactly what you instructed they would.🏌🏾♂️
send me some pics of the install, love to see your truck. Dan@OBSOutpost.com
Any brackets for a 2004 extended cab?
Willl it work in 1997 4wd Crew cab dually?
yes
How did u wire the power seats?!
I have a diagram we send out
@@OBSOutpost so when I buy the brackets it comes with the diagram? If so then I will place my order soon!
@@aronramos3432 yes we include the wiring diagram, for the power function, not the heating and cooling.