Had to skip out of work for a long lunch so I could watch this! Top work - bloody good result. Bummer about the end mill but that’s all in a days work in the shop. Well, in mine it is. 😁 Great results, going to enjoy this project I can already tell. Nice job on the HSS threading tools - being able to make your own custom cutting tools is a wonderful thing. 👍👍
Good to see you back, Matty. I'm sure I speak for most of your followers when I say we've missed your cheerful cussing. This looks like a useful addition to the lathe tooling. Waiting for vol 2. Regards from Canada's banana belt. 🤞🇨🇦🍌🥋🇺🇦🕊🇦🇺🐨🪃👍
Now that's a real machinist, never throw anything in the bin, you might need it someday. Remembering where you left it is the hardest bit. Nice job as usual, even with the evading endmill 😉😂
Oh, Matty! You musn't use bad words, even after you've screwed up. Just give a deep sigh. Remember what Mum said, mate. Thanks for posting, man. Appreciated. [edit] And just so you know, I really like your closing pics of NSW. They're beauty, mate
Nicely done mate. I dislike machining chromed bar, from the noise to the chips. Nowadays there are better tools but back in the day it was a tedious process. The tooling looks great so far despite the self destructing end mill 😂 we've all had them. I wish TH-cam would sort out their notification alerts, just looking and found this post but no alert. Hope you and family are all well, take care and see you next time 👍
I have made a few things that I could have just gone out and bought. Sometimes it is quicker to make them than to drive across town and back in the stupid Auckland traffic. Good work Matty.
Look on the bright side, he stub of that deceased endmill will be useful for making custom cutters! I've NEVER snapped a 4mm mill. Lots of other sizes, but never a 4. Destroyed a 3/4 inch 4 flute once by enabling the Bridgeport feed the wrong way. That made a mighty bang.
Nice finishes on those parts, Matty. I've been real happy with my Hafco edge finder. Just make sure you don't have it in the spindle and start it up at 2500 rpm. You'll soon find out what centrifugal force is all about. A friend told me this happened to him 😅 Regards, Preso
Happy to see you starting a new project Matty. Always more fun making parts yourself than buying them. Hope you’re keeping well mate. Looking forward to part 2. Cheers Nobby
Well g'day Matty and great seeing you back in front of the camera my mate, hope you're keeping well, and the dust is settling down, just starting my day with this, a fresh coffee and I'll certainly be inspired to get at in my shop, lots of love to you and yours Ralfy
G'day Matty. Great project you have started. Everything worked like clockwork, and the nut, slid over the threads perfectly. Yep those pesky little end mills get in the road of the vice. 😅 I can show you a new 10mm got in the road, ended up in 3 pieces 😊 Ted
Well done. I find making something no matter how it turns out is a whole lot more satisfying than buying the same thing. If I save money, all to the good, if I don't it's still much more satisfying to make. I enjoy your vids and I'll watch whenever you feel like posting. Thanks for sharing
G'day Matty, great job as always, I've bought one of those electronic edge finders, wasn't expecting it to be as repeatable as they are considering the price 👍
Nice one Matty, those edge finders look the business. I'm not sure how a pipe centre works to be honest so I think I need to watch the video over with sound rather than trying to read subtitles and watch what youre doing, then I should get a proper idea of what it does, some great processes and filming too Thanks for sharing
G'Day Matty, nice to see you back. Just a word of warning for that electronic edge finder, if you try to use it on anodised aluminium the anodising acts as an insulator and it wont work and if you forget and think you're not touching the part yet you can snap off the end of the edge finder by going that little bit extra. Forewarned is forearmed 👍
Hay Matty nice build there making your own Nuts strangely satisfying i did manage to finish that sentence for you and i think word for word have done similar myself anyway looking forward to the next part of the build cheers from up north
Gday Matty good to see ya back. Yeah I've done that too more than one end mills, it doesn't get any less annoying but at least the language gets worse and it makes you feel a little bit more stupid each time. Catch ya on the next one.
G'day Matty, how are you? The pipe centre is coming along nicely mate. I'm looking forward to part two, coz I'm gonna copy it if you don't mind? Cheers from poor old England! ( we will be a damned sight poorer with this bloody new government lol) Sam
Ya got me on the thumbnail, Matty! A quick glance and I thought it said "MT8 pipe centre" not "MT3"! I wanted to see what kind of lathe you were using that had an MT8 tailstock!
Matty, your work is so beautiful.
Nice Job as usual Matty. I’m always impressed with your Machining.👍👍
Thanks mate
Had to skip out of work for a long lunch so I could watch this!
Top work - bloody good result. Bummer about the end mill but that’s all in a days work in the shop. Well, in mine it is. 😁
Great results, going to enjoy this project I can already tell. Nice job on the HSS threading tools - being able to make your own custom cutting tools is a wonderful thing. 👍👍
Gday Stuart, Hope you enjoyed your lunch mate and appreciate you watching, Cheers
Good to see you back, Matty. I'm sure I speak for most of your followers when I say we've missed your cheerful cussing.
This looks like a useful addition to the lathe tooling. Waiting for vol 2. Regards from Canada's banana belt.
🤞🇨🇦🍌🥋🇺🇦🕊🇦🇺🐨🪃👍
Thanks mate, Appreciate you watching and commenting, Cheers
Now that's a real machinist, never throw anything in the bin, you might need it someday. Remembering where you left it is the hardest bit. Nice job as usual, even with the evading endmill 😉😂
Thanks for watching mate, Cheers
Oh, Matty! You musn't use bad words, even after you've screwed up. Just give a deep sigh. Remember what Mum said, mate.
Thanks for posting, man. Appreciated.
[edit]
And just so you know, I really like your closing pics of NSW. They're beauty, mate
Thanks for watching mate
Saved the end mill... and added to the legend of Matty!
Thanks for watching mate
Nicely done mate. I dislike machining chromed bar, from the noise to the chips. Nowadays there are better tools but back in the day it was a tedious process. The tooling looks great so far despite the self destructing end mill 😂 we've all had them. I wish TH-cam would sort out their notification alerts, just looking and found this post but no alert. Hope you and family are all well, take care and see you next time 👍
Gday, I have to stop buying the self destructing end mills, Im sure I ordered normal ones🤷♂️🤣, Thanks for watching mate, Cheers
I have made a few things that I could have just gone out and bought. Sometimes it is quicker to make them than to drive across town and back in the stupid Auckland traffic. Good work Matty.
Gday John, its more enjoyable to build it yourself to mate, Thanks for watching, Cheers
Nice Job! Beutiful morse taper turning. Spectacular endmill fail, adds drama! I do that allot with carbide milling cutters, now I only buy HSS.
Gday Nigel, I couldn’t believe I did that to the endmill, doesn’t happen often thankfully, appreciate you watching mate, cheers
Look on the bright side, he stub of that deceased endmill will be useful for making custom cutters! I've NEVER snapped a 4mm mill. Lots of other sizes, but never a 4. Destroyed a 3/4 inch 4 flute once by enabling the Bridgeport feed the wrong way. That made a mighty bang.
Gday, the rest of the endmill got turfed in the bin outa frustration🤣, I can imagine what the 3/4 cutter sounded like, thanks for watching
Glad you are getting in some shop time in between banging gears.
Gday Tom, good bit of variety now mate, appreciate you watching and commenting, cheers
Nice finishes on those parts, Matty. I've been real happy with my Hafco edge finder. Just make sure you don't have it in the spindle and start it up at 2500 rpm. You'll soon find out what centrifugal force is all about. A friend told me this happened to him 😅
Regards, Preso
Gday Preso, the edge finder works great and always repeats, centrifugal forces can be a problem by the sounds of it mate, thanks for watching, cheers
Happy to see you starting a new project Matty. Always more fun making parts yourself than buying them. Hope you’re keeping well mate. Looking forward to part 2. Cheers Nobby
Gday Nobby, it’s much more satisfying making things you need rather then buying them, appreciate you watching mate, cheers
That's a pretty looking river!
At least it was only an endmill and not a 15 hr part as well!!
Thanks for sharing 🇨🇦
Cheers mate, Thanks for watching
Well g'day Matty and great seeing you back in front of the camera my mate, hope you're keeping well, and the dust is settling down, just starting my day with this, a fresh coffee and I'll certainly be inspired to get at in my shop, lots of love to you and yours Ralfy
Gday Ralfy, I’ve been keeping fairly busy mate, feel like another coffee now you mentioned it🤣, appreciate you watching as always mate
G'day Matty. Great project you have started. Everything worked like clockwork, and the nut, slid over the threads perfectly.
Yep those pesky little end mills get in the road of the vice. 😅
I can show you a new 10mm got in the road, ended up in 3 pieces 😊
Ted
Thanks Ted, I’m hoping I don’t make breaking endmills a habit, thanks for watching, cheers
Hi Matty. Great to see you back. Iv'e been slacking lately. Must get busy. Great video & looks very accurate as usual. All the best
Steve.
Gday Steve, nothing wrong with being a bit slack mate, Thanks for watching, Cheers
My idea too. Yoy can buy whatever you want, but make yourself is way more fun.
Definitely a lot more fun making it myself mate, Thanks for watching
Well done.
I find making something no matter how it turns out is a whole lot more satisfying than buying the same thing.
If I save money, all to the good, if I don't it's still much more satisfying to make.
I enjoy your vids and I'll watch whenever you feel like posting.
Thanks for sharing
Thanks mate, Definitely much more enjoyable building it yourself, Thanks for watching, Cheers
4:03 😍😍😍 we glad you are fine dear sir 🌹🌹 keep it up strong man
Cheers
In fact, I very much enjoy watching your videos, and I hope that God will grant you good health
It was a nice surprise to see your video on a Tuesday morning rather than on the usual Thursday.
Gday, Im not sure if ill go back to Thursday uploads now mate, see what happens, Thanks for watching, Cheers
20.002mm careless. Nice job Matty. I have to make a pipe center, so I can't wait for the finished product for inspiration.
Thanks for watching mate
Really great to see you well enough to be back...
Cheers mate, Thanks for watching
G'day Matty, great job as always, I've bought one of those electronic edge finders, wasn't expecting it to be as repeatable as they are considering the price 👍
Gday, Im pretty impressed with this in mate, Cheers
Good to see you back on YT Matty.
Great channel donations 👏
Nice build series, handy addition to the shop.
Gday, the gifts are amazing mate, appreciate you watching and commenting, cheers
Great to see you in the shop Matty
another A1 job👍👍👍👍😉😉😉😉
regards
Kev
Thanks very much Kev, Appreciate you watching as always, Cheers
Looking good Matty! It's great to see you again.
Thanks mate, Cheers
Great project.
Good to see you
Thanks mate
Hey buddy. Good to see you doing well.
Great camera work Matty, and the shop looks very smart. I like the project. Very instructional. Cheers
Thanks very much mate, appreciate you watching, cheers
21:12 sorry Matty, that snapped alright. Glad to see you, thanks 👍💪✌
Good thing it only snapped once mate, Thanks for watching
might be cheaper for you too make it if you add in your time to run too the hardware store and the gas ,, glad your back on You Tube .
Gday, More enjoyable to make it as well, Thanks for watching, Cheers
thanks for that very interesting
Cheers mate
Lookin' sharp Matty and another video well worth waiting (WWW) for
Thanks mate
Welcome back Matty hope you are refreshed and found your motivation for sharing your hobby.
Thanks mate
Hello Matty, awesome job, smiles for miles.
Happy days.
Thanks for watching mate
I don't know how you're feeling but you look and sound good. Nice content. Thank you!
Im going good now thanks mate, Cheers
Nice one Matty, those edge finders look the business. I'm not sure how a pipe centre works to be honest so I think I need to watch the video over with sound rather than trying to read subtitles and watch what youre doing, then I should get a proper idea of what it does, some great processes and filming too
Thanks for sharing
Gday, Its just like a normal live centre but with a larger nose cone, Thanks for watching, Cheers
Nice work. I hope that there will be a time when these tool drawings will be available. Thanks for sharing. All the best my friend.
Gday, These will be available soon I believe, Barry is working on it now, Cheers
Nice!
Hi, Matty. Another cool project. Looking forward to the next one. Thanks and be well, mate. Cheers.
Thanks mate, glad you enjoyed, cheers
good video Matty
Cheers mate
Great video Matty, good to see ya up and at'um,looking forward to the next video..
Thanks mate
Always great Matty, Paulie in Florida, the other Sunshine State….
Cheers Paulie, Thanks for watching mate
G'Day Matty, nice to see you back.
Just a word of warning for that electronic edge finder, if you try to use it on anodised aluminium the anodising acts as an insulator and it wont work and if you forget and think you're not touching the part yet you can snap off the end of the edge finder by going that little bit extra.
Forewarned is forearmed 👍
Gday, Thanks for letting me know mate, I'll defiantly remember this, Cheers
Mr Matty. Good to see you. You are looking well. Nice work mister.
Cheers mate
Nice job Matty.
Thanks mate
Once again, nice work Matty. Glad to see you back.
Thanks mate, appreciate you watching
Super nice Matty. . great job in recovering the nut threads. . Have a great day.
Gday, It almost ended up in the bin mate, Thanks for watching
young man, l'm very happy to see your video,
keep on keeping on.
Cheers mate
So happy you are back looking fine Ron
Appreciate you watching mate, cheers
Hay Matty nice build there making your own Nuts strangely satisfying i did manage to finish that sentence for you and i think word for word have done similar myself anyway looking forward to the next part of the build
cheers from up north
Gday, it’s very satisfying when things work out mate, appreciate you watching, cheers
Thx for the vid.
Cheers mate
Gday Matty good to see ya back. Yeah I've done that too more than one end mills, it doesn't get any less annoying but at least the language gets worse and it makes you feel a little bit more stupid each time. Catch ya on the next one.
G'day Matty awesome work as always mate
Thanks mate
Good to see you Matty,
Nice little project
Cheers….
Gday Dean, hope your going well mate, cheers
Very nice job so far. I'd have made the nut too - I dislike chequebook engineering!
Gday, I did think about making the washer as well but got lazy, thanks for watching, cheers
G'day Matty, how are you? The pipe centre is coming along nicely mate. I'm looking forward to part two, coz I'm gonna copy it if you don't mind? Cheers from poor old England! ( we will be a damned sight poorer with this bloody new government lol) Sam
Thanks Sam, Appreciate you watching
Nice work Matty. Enjoyed watching. Cheers Tony 👍
Cheers Tony, thanks for watching mate
very good to see mate .now have to wait for part two
Hopefully won’t be to long away, cheers
Happy Days ... Nice To See A Video From You Chap ...
peace
Thanks mate, appreciate you watching and commenting, cheers
@@MattysWorkshop Pleasure ... Thank You Kindly for the Videos Chap And Sharing Your Amazing Knowledge ...
peace
Good one! Thanks for sharing 👍
Thanks mate
Looking like another good job in the making stay safe
Cheers mate
Need to make one myself. Great job so far.
Thanks mate
Pleased to see your video! All the best, Matthew
Cheers mate
good to seen ya in action ... hope you are getting better ...
Thanks for watching mate
Nice. Have a good one mate. ATB. Cheers👍
Cheers Tom, Thanks for watching mate
Welcome back
Thanks mate, appreciate you watching, Cheers
Very nice job...Thank You...
Cheers mate
Nice to see you looking well mate
Thanks mate, appreciate you watching, cheers
Good show, Matty!
Thanks mate
Welcome back matty
Thanks mate, Cheers
Ya got me on the thumbnail, Matty! A quick glance and I thought it said "MT8 pipe centre" not "MT3"! I wanted to see what kind of lathe you were using that had an MT8 tailstock!
Gday, Don't worry, I had to check the if I put a 3 not an 8 there myself 🤣, thanks for watching
Hi Matty. Welcome back, sorry about the end mill, like I never did that before, yeah right!! Cheers
I hope I don’t make a habit of breaking endmills🤣, thanks for watching
21:11, Oh Well, not to worry just a slip up.
Frustrating slip up mate🤣
@21:08 …… whoops…… we’ve all been there 😢
Big whoops mate🤣
Oh, yes, the end mill twang. Might’ve done that a time or three…🤨
Not fun when it happens mate
Booong goes the end mill bit and the PG rating changed on the video ( it’s ok I filled in the blank for the full effect)
It went booong big time mate, Thanks for watching