AXI03006 Axial® SCX10™ III Jeep® Gladiator JT 4WD RTR
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2020
- www.axialracing.com/t/vehicles...
The 1/10 scale Axial® SCX10™ III Jeep® Gladiator JT 4WD RTR marks the next step forward in ready-to-run, scale off-road action. While continuing to incorporate key components that have made SCX10™ vehicles successful, the SCX10™ III chassis increases realism with details that include a replica V8 engine to house the front-mounted 540 brushed motor, mated to a realistic transmission housing and transfer case like a 1:1 vehicle. The Spektrum™ DX3™ 3-channel 2.4GHz DSMR® transmitter and Firma™ 40A ESC/receiver are also ready to give you the advantages of innovative Spektrum™ Smart technology.
Out of the box, the SCX10™ III Jeep® Gladiator JT transmission offers a third-channel DIG function that lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Though locked out from the factory, you can set up the vehicle to have a 40% faster second gear instead of DIG - or, by adding another micro servo and using a radio with at least four channels (such as the 5-channel Spektrum DX5), have simultaneous access to both the DIG and two-speed functions.
The SCX10™ III Jeep® Gladiator JT uses new AR45™ portal axles to improve performance by increasing the ground clearance and reducing torque twist. The motor is located at the front of the chassis for forward weight. The standard battery tray is positioned near the vehicle’s center for improved balance and accepts full-size LiPo or NiMH packs. There are also locations in the side pods for drivers who prefer smaller “shorty” LiPo packs. Inner fenders and floor sides hide internal components that would usually be visible from the side of the chassis.
Topping off the chassis is a scale Jeep® Gladiator JT body that mirrors its full-size counterpart with many highly authentic details. The body has over 20 injection-molded parts including a bed rack, door handles, mirrors, hood vents and more - taking polycarbonate body realism to the next level. The body has been split into three pieces for a more realistic deep bed. Officially licensed Nitto Trail Grappler tires on 3-piece beadlock wheels add more scale realism and more grip on dirt, rocks, and all other off-road trails.
With the Spektrum™ DX3™ radio, you’ll enjoy the superior range, response, and interference resistance of DSMR® technology. Together with the installed Firma™ Smart 40A ESC/receiver, it also offers the advantages of exclusive Spektrum™ Smart technology. Install a Spektrum Smart LiPo battery and you can view vehicle battery capacity at a glance on the DX3 transmitter’s voltage level indicator. Outfit the DX3 with the optional BT2000 Bluetooth module and download the free Spektrum Dashboard™ app to your smart device, and you’re also ready to use Smart real-time telemetry - without needing on-board sensors or modules.
©2020 Horizon Hobby, LLC. Axial, the Axial logo, SCX10, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. Nitto, KMC Wheels, and CRC are property of their respective owners and are used with permission or under license by Horizon Hobby, LLC.
Jeep, the Jeep grille and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Horizon Hobby, LLC. ©2020 FCA US LLC.
NOTE: Prototype shown. Some imagery may differ from the actual product. - ยานยนต์และพาหนะ
It actually has a deep truck bed. FINALLY. I'm super excited for this.
Ordering this one for sure!!!! Been waiting for this since it was leaked!
Just got one of these and very impressed in the short time I've been able to drive it.
Go Axial!! Wish I was in a position to get one right now but I am stretched lol. Will get one later.
I have a scx10 i and i am so happy to see that they made a new one...
I will get it for sure!
I got this body style & already have it upgraded. Took the back off & did a flatbed instead. Can't wait to do more to it!
The best of 2020💪💪
Gladiator body looks really nice 👍 and scale too
Awsome work and filming keep up axial
R Crawling thats correct.. 🎬
Looks amazing, I’ve been wanting one of these since the release. Life got in the way, but maybe it’ll settle down enough to get one soon! Awesome product, I love Jeeps and this Gladiator looks fantastic - well done. Can’t wait to get one and do some slow, relaxing crawling. 👍✌️
Just bought mine last week in red. It's pretty sweet.👍
Killed it Axial🔥🔥
Another Jeep, yippee
Can't wait to get this in my hands
Sweet rig!
Good job axial!!!😍👍
Primos RC they did! 👍🏼
This SCX10 seems to have a very good movement👍
I would really like to see capera axles on this rig. that would make it perfect. good looking rig.
What would be a massive crawler. Wider and longer
@@mojaverc1585 yea... my wroncho wth AR 60"s is my favorite rig to drive. the wheelbase is 13 5/8 and it's light low and wide. I would keep the wheelbase stock.
Great! I will have it on my channel soon! 👍🏼👍🏼👍🏼🇻🇳
Please make a full body kit so that we can put them on other axial vehicles.
Freddies Rc all on axial website, just have to order the bits separate
Dan Gavin RC thank you
Freddies Rc no problem my man, have fun
Yeah! 💪😃👍 That’s awesome! 👍😃👍
Ordered mine yesterday.
Look great.
Hopefully they update the 6x6 platform as well, the TRX6 needs some competition! 😉
Looks very good. Kit version anytime down the road?
Did you fix the gear tolerance problem that makes it click under load?
Looks good but what about the turning left problem?
Awesome!😎👍
So at 0:34 the bottom of the vehicle is propped on a rock and basically swiveling. The dig function really didn’t have anything to do with the truck turning there.
Is there an SCX10-III Jeep JT Gladiator Kit on the way? Or do I have to buy an RTR and strip the electronics, then try and strip the paint off the body?
✌🏻😎🏴Awesome as always. Is this your 202020 special or is there another one on the way? There’s 4 dates left 😃
Hey, Axial. I wanna rebuild my Exo Terra Buggy, but I wonder, if I can still get the Parts I need (Servo-Mount, Motor-Mount, Receiverbox Cover). Please answer. Thx
Very nice video my friend, great work 👍#440
Was this filmed at Alabama Hills?!
Wow way to go axial but do a non Jeep one too. Maybe a Land Rover discovery 1
Heck yes! 3 door Disco 1 would be fab!
yes!!! real drop bed!!!!
1:1 scale Gladiators are hideous....., but Axial’s 1/10 version is 🔥!
seriously, the proportions are so much better. axial did a great job
Go axial time!!!!! 💪🏼💪🏼💪🏼⛰💪🏼💪🏼💪🏼
Can someone advice me what to get for my 5 y old son. To do some good 4x4 crawling. We live at the beach and forest. Budget around 250 euro.
Well well you did well with this...I could imagine how great the 6X6 will be....the question is what body will you launch with it🤔
Hopefully the ford raptor 6x6 hennessey
@@ukmudlover7839 that will be awesome...
🔥🔥🔥🔥🔥
I want one so bad !!!! 🤤😃👍❤️
I think the new Scx10iii should come with the ambush scout body I might buy 1 then
I really hate 4 door Jeeps especially the Gladiator Tank. BUT Axial really did a good job on this.
Good looking I guess. But I will wait for a not Jeep 10iii before I consider one
I think it’s the best besides the JL because of the wheelbase and scale realism axial nailed it
Ill be buying 2 of those bodies and put it on my 6x6 with a longer bed
Need Kit to and No Portals
wish i could get one but its expensive to me. i can afford it but i find it very expensive to me.
As popular as they are getting somebody needs to make scale Milestart Patagonia M/Ts! Hint hint Axial!!!!
Also make this a kit and im selling my TRX4 for it like immediately!
This Guy rc4wd has them in 4.75 height and they are great tire and the foams are pretty good in them
Hey axial I'm in love wanna trade for my decked out trx4 sport LOL 😆 Rich would be ok with it im sure 👍
👌
I hope axial fixed all the flaws
U guys got to build a new buggy to keep up with the Lodi lasernut
both companies are owned by horizon hobby, so they are kinda like the same thing now
i need one i would review it on my youtube channel
teton30000 well pre order’s are open
I wish it was a kit, no portals, and no dig or 2 speed option
josh_rit you don’t have to have dig and two speed
We need a kit
I am thinking since the 10iii has an adjustable chassis if you can just get the body and 10iii kit separate.
RC Upgrades in a podcast I watched the axial guy said that the body alone would cost like 200, then you’d need all the extended chassis parts which would cost like 80
@@dangavin Ok 200 is a lot for a lexan body,guess its all the fenders and interior parts.
RC Upgrades well it’s a three piece body with all the plastic bed and roll cage as well as the separate lexan pieces
Looks great but $520?!! Yikes!
Byebye honcho?
Just got the email
Proline stay more update than axial the body very cheap for scx10 proline proline is the best
Absima Sherpa is still the better deal.
Enough with the Jeeps!!!
Don't get me wrong I love Jeeps but there are other bodies you could use.
Too bad the scx3 has a horrible transmission. Junk. Sloppy a d noisy. Not ever buying one lol.