First time RC owner. Had my JT RTR for a few months now. Have not been a TH-cam user so it sat around after that WTF moment when I realized this was not the plug & play I hoped it would be. These videos are a great help. Just took it into the backyard and put it and myself through the paces. Thanks for the ideas and suggestions.
I found my baseball cap inside the receiver housing in the accessories baggie. Thought it was missing at first. This video was exactly what I was looking for to upgrade my RTR. Love the wheels and tires you picked.
Great video as always, I can’t wait to see what you do next. I have the SCX10 III kit with the dig setup. It looks like I need to save my money for the Gladiator now. Thanks, Matt!
Looking forward to this series. As I hope to get this truck in the near future. I would like to see how the Hobbywing fusion 1800kv would fit in this. That will and tire combo is perfect!
For a motor, i would highly suggest the 1200kv hobbywing fusion, i know you dont like wheel speed as much as some but its so smooth and just the perfect amount of speed on 3s.
I installed Club5Racing's EZOFF hinge and magnet system on my Gladiator. Now the body just tilts up out of the way like it does on the stock 1/24 Gladiator. And no more screwing with those awful body clips! Highly recommend. And if you need the body completely removed for working on the truck, it comes off with a couple easy screws at the rear.
This is going to be a great series! Love mine and have already gone for vitavon brass portal covers X4 and ali panhard, Knight Customs fenders, sliders and some other accessories, HW 540 2300kv with FS GT5 and cant get over how enjoyable it is to pilot and how capable it is on the Welsh mountains. Still awaiting Ottsix Baby Faces to arrive from the US. 50wt oil has made a great improvement to technical trailing/climbing and given more support to the heavy ish body. Really looking forward to seeing the project develop Matt, after a warm but not hot initial reaction to its release it quickly seems to have become a really well rated truck; and it climbs like an absolute goat! Look forward to the next episode
17:34 how are you supposed to stop without calipers on those rotors? I’ve done tons of brake jobs and I know calipers are a crucial part to stopping the vehicle.
the only thing i like about having more wheel speed with my trail trucks is being able to clean out the tires in mud by spinning them faster than stock speed
I just subscribed to ur channel today because I just bought my jeep Gladiator and tell u I'm very happy I haven't even run iit yet so I'm more happy to know ur upgrades I can't wait to upgrade mines slow I have the red one its awesome especially tha cowboy the driver
that is exactly what people thought when jeep first made that gladiator (i LOVE what Hennesy performance did to it its called the maxximus for a reason)
Could you do a tour of your workbench and the tool you use please. I am returning to the hobby and seeying what you use and your setup would help. Thanks
Hey I just stopped watching and went searching for overdrive portal gears for trx4. I didn’t find anything. But maybe my search words were incorrect. “Trx4 portal overdrive output/input gears” So I’m back and finishing the vid. Are there overdrive options for trx4 besides the ring/pinion in the axles?
Great video Matt I got the Black version, l got rc4wd mud slingers and RC Lions aluminum beadlocks I ordered the same portal upgrades this is my 3rd scx10iii, the kit has a 2014 Chevy Silverado crewcab on it and the rtr JLU got the personalised clear body, bummer you didn't get the baseball hat, see ya next upgrade 😎👍
Why nut take a few measurements and run to the lap top, then rhn to the 3-D printer and print out the lights bucket with a lip or tongue/groove - 2 sided tape fixture to the stock fender. Keep strength, have light bucket and a new income stream lol... 🤔 😁 Love SBG!!!
I love my JT but I swapped to the 2 speed setup. I was immediately disappointed as the difference in gearing is not enough to use it more often. I then dropped the pinion a couple teeth to hopefully make more use of it since I run 3s.
I started in model trains when I was 6 years old. I liked building things for my layout and was in the hobby shop when I saw a promotional video for the Tamiya Monster Beetle. Once I saw that, it was all RC, all the time. Didn't really get serious into the building end of the hobby until my early 20's.
@@scalebuildersguild I got my first real RC @ 40, Axial SCX10 Jeep Wrangler Unlimited. Before that I had the Nylint Jeep Wrangler Rock Crawler, it was fun for about 15 minutes at a time. I actually still have it along with the yellow Scorpion body. Within 4.5 years I'm up to 7 RC's!
THIS! So excited! Many SSD parts I love to use. For sure getting those fenders, quite the game changer. How wide ssd rotor/hubs you went with? And anymore weight you plan on adding down low? Thanks again!
When you said there is some difference of the RTR from the kit version where you only talking about the JLU vs JT? I was under the impression that the JLU was exactly the same as the kit and no parts were subbed for the RTR.
great video brother, i gots ta git me one of them there trucks..lol hey man this may be a dumb question but, i've been in the hobby for many years and still have no idea what those metal collars are that are on some motor leads, any idea??
I'm looking into this rig and you mentioned it has a 13.9 inch wheelbase. But on the axial website it says it has a 14 inch wheelbase and includes a larger more realistic 3 piece body. Do you know if there's a newer version of the gladiator?
With the more aggressive offset (looks much better), did you have any rubbing issues with the tire at the lower rear of the front wheelwells when crawling? If so, what was your resolution? I’m working on getting mine set up with new wheels/tires and want to get much more aggressive with the offset, but at the same time I want to not rub when out on the rocks.
i be having a hard time chooses what kind of truck I want as my crawler. one being money but mainly idk what body I want. it most likely is the sc 10 or trx 4 but what body. I like old power wagons but jeeps look ok too and the old chevy body seems like a classic. idk
Great video, but that's nothing new. Lol. I already put the Rooftoptent and Sandladders. I ordered the front and rearbumper from CChand and the front fender flares as well. Installed the Mytrickrc lightkit for the JL, had to use the dremel for the rear rocklights to fit (3d printed holders) and next up is the AXE 540 2300KV and a Savox 1210SG. Already put some Boomracing Krait 1.9 rims with the Proline KM3 Mud terrain predator compound. All that bound to a DX5C with SR515.
Never jumped into the initial 10 III releases. Actually hate the gladiator in real life but, the RC version looks great. Parts bin is already getting stocked full of hop-ups for it, when I buy it.
Why does is there a random hole in the middle of the rear links? That seems weird . Aside, This truck is fantastic! Likely even fantastic still with the random factory weakened links
Because the links have standard threads on one end and reverse threaded on the other end. One ball end is standard thread, one ball end is left hand thread. That way you don't need to pop a ball off to lengthen or shorten the link. Just stick a small Allen wrench in that "random" hole, turn clockwise to shorten the link. Counterclockwise to lengthen the link. These types of links have been used for years in the world of rc helicopters. They call them turnbuckles.
I have a question, can plug a speedpack 1800 mah 7.2v 6 cell Ni-MH Battery, dynamite Brand in my new gladiator scx- 10 lll jeep please 🙏 help me out i jus wana take outside today its beautiful out here im in Wyoming, Mi
First time RC owner. Had my JT RTR for a few months now. Have not been a TH-cam user so it sat around after that WTF moment when I realized this was not the plug & play I hoped it would be. These videos are a great help. Just took it into the backyard and put it and myself through the paces. Thanks for the ideas and suggestions.
Glad to hear that the videos were helpful! Make sure to reach out or join the forum should you have any further questions!
I still would love to see the gladiator as the next scx24....perhaps a scx24.2?!
You got ur wish lol
@@maherkahala5269 aww man you beat me to it
Your videos are what have inspired me that scale rock crawlers need to be my next hobby. Paint up a small version of my 97 Jeep TJ!
I’m so excited to watch this series!! The Gladiator looks like a fantastic rig. 👍✌️
This JT is going places. Can't wait to see how it comes together.
I found my baseball cap inside the receiver housing in the accessories baggie. Thought it was missing at first. This video was exactly what I was looking for to upgrade my RTR. Love the wheels and tires you picked.
Can you do a top ten sort of video about most scale looking chassis ?
Gladiator and Capra are one of the most underapreciated rc´s out there, )
Great video as always, I can’t wait to see what you do next. I have the SCX10 III kit with the dig setup. It looks like I need to save my money for the Gladiator now. Thanks, Matt!
Looking forward to seeing how cool this one turns out.. One day I hope my squares are as well worn as yours.. Oh, and I called my Mom.
Looks great! Amazing how just a few changes can make such a difference.
I love how big it is.
Can't wait to see what you do with it.
Yessir looking forward to seeing more of this build 👍 this would have made a cool budget build off
I plan on making mine look kinda close to the one I drive . I will be following this one real close 😀
Just ordered mine after this vid. Will be here Thursday I'm excited. Plan on dropping my hbw axe 1900kv in
Everything you do is awesome I'm sure this will be too. Great start looks awesome!
Looking forward to this series. As I hope to get this truck in the near future. I would like to see how the Hobbywing fusion 1800kv would fit in this. That will and tire combo is perfect!
It looks much better already.
I can't wait to see what stage 2 going to be.
For a motor, i would highly suggest the 1200kv hobbywing fusion, i know you dont like wheel speed as much as some but its so smooth and just the perfect amount of speed on 3s.
Looking great Matt looking forward to the next update 👍👍
Another awesome video! Loving this series. Looking forward to the rest of the videos in this series. Thank you!
More to come!
@@scalebuildersguild YES!
I installed Club5Racing's EZOFF hinge and magnet system on my Gladiator. Now the body just tilts up out of the way like it does on the stock 1/24 Gladiator. And no more screwing with those awful body clips! Highly recommend. And if you need the body completely removed for working on the truck, it comes off with a couple easy screws at the rear.
Sounds good, I'll have to check that out!
This is going to be a great series! Love mine and have already gone for vitavon brass portal covers X4 and ali panhard, Knight Customs fenders, sliders and some other accessories, HW 540 2300kv with FS GT5 and cant get over how enjoyable it is to pilot and how capable it is on the Welsh mountains.
Still awaiting Ottsix Baby Faces to arrive from the US. 50wt oil has made a great improvement to technical trailing/climbing and given more support to the heavy ish body.
Really looking forward to seeing the project develop Matt, after a warm but not hot initial reaction to its release it quickly seems to have become a really well rated truck; and it climbs like an absolute goat!
Look forward to the next episode
Now I really want one of these trucks.. ugh... looks great!!!
Michael Heliker I was thinking the same thing. I would love to get one and follow his upgrades
Ron Hinkle I know, right!?? I just can’t afford to do it every time sbg, or Harley designs does this!!
17:34 how are you supposed to stop without calipers on those rotors? I’ve done tons of brake jobs and I know calipers are a crucial part to stopping the vehicle.
Drag brake in the motor, duh. ;)
I love that “overland cage”.
Awesome! I'm still in love with short wheelbase jeeps though. Would like a2dr jl, soft top both in RC and 1:1.
Yeah looking sweet. I dig it. I wish the body came in black, appreciate you sharing. I'm looking to get one down the road
I would have liked to see Sting Grey, myself!
the only thing i like about having more wheel speed with my trail trucks is being able to clean out the tires in mud by spinning them faster than stock speed
Looks killer! I can't wait to see the next stage.
I just subscribed to ur channel today because I just bought my jeep Gladiator and tell u I'm very happy I haven't even run iit yet so I'm more happy to know ur upgrades I can't wait to upgrade mines slow I have the red one its awesome especially tha cowboy the driver
that is exactly what people thought when jeep first made that gladiator (i LOVE what Hennesy performance did to it its called the maxximus for a reason)
Now i want one even more. My next door neighbor has a dark orange gladiator. It looks sharp. Although nothing beets olive darb green. I like add ons.
They sure are taking their sweet time with those straight axles.
What foams are you running in the tires? Do you normally vent your tires?
Could you do a tour of your workbench and the tool you use please. I am returning to the hobby and seeying what you use and your setup would help. Thanks
I’ve done a workshop tour! Also cover a lot of the tools I use in other videos! Check the channel for more!
I put the new Hobbywing 1800kv Fusion system in my JT, love it!
I wait a grey one for christmas... I hope that Santa bring me one! Great review and great mods, as usual! Congrats
Hey I just stopped watching and went searching for overdrive portal gears for trx4. I didn’t find anything. But maybe my search words were incorrect. “Trx4 portal overdrive output/input gears”
So I’m back and finishing the vid. Are there overdrive options for trx4 besides the ring/pinion in the axles?
awesome like always Matt brother order the grey one last week, appreciate this vid, stay safe brother
Great video Matt I got the Black version, l got rc4wd mud slingers and RC Lions aluminum beadlocks I ordered the same portal upgrades this is my 3rd scx10iii, the kit has a 2014 Chevy Silverado crewcab on it and the rtr JLU got the personalised clear body, bummer you didn't get the baseball hat, see ya next upgrade 😎👍
I really enjoy the intro to this episode
Haha, nice one! Always on point Sir! Somehow the new colour on the backdrop escaped me before, overall, glad to hand out the 870th like, thank you 👍
Does it still click?
The Jeep looks awesome.nice selection on parts Matt.💪
Why nut take a few measurements and run to the lap top, then rhn to the 3-D printer and print out the lights bucket with a lip or tongue/groove - 2 sided tape fixture to the stock fender. Keep strength, have light bucket and a new income stream lol... 🤔 😁 Love SBG!!!
I love my JT but I swapped to the 2 speed setup. I was immediately disappointed as the difference in gearing is not enough to use it more often. I then dropped the pinion a couple teeth to hopefully make more use of it since I run 3s.
How did u get into the hobby
I started in model trains when I was 6 years old. I liked building things for my layout and was in the hobby shop when I saw a promotional video for the Tamiya Monster Beetle. Once I saw that, it was all RC, all the time. Didn't really get serious into the building end of the hobby until my early 20's.
@@scalebuildersguild Monster Beetle was the first rc for a lot of people.
@@scalebuildersguild awesome story Matt thanks for sharing 👍
@@scalebuildersguild I got my first real RC @ 40, Axial SCX10 Jeep Wrangler Unlimited. Before that I had the Nylint Jeep Wrangler Rock Crawler, it was fun for about 15 minutes at a time. I actually still have it along with the yellow Scorpion body. Within 4.5 years I'm up to 7 RC's!
Looks awesome. SSD makes so many great parts
I’m excited to see what’s next!
THIS! So excited! Many SSD parts I love to use. For sure getting those fenders, quite the game changer. How wide ssd rotor/hubs you went with? And anymore weight you plan on adding down low? Thanks again!
What is the connector for the batteries when first put of the box is it a IC5 or IC3
IC3.
stage one looks great so far!!
DUDE I am FOREVER on the phone with my mom eating a sandwich when I'm driving my RC cars. I'm so glad they solved my problem :D
😂
I believe the fender's manufacturing process might be "SLS" which is what Shapeways use. It's "Selective Laser Sintering".
In retrospect, I think you're right!
will the rock sliders fit a scx10ii
eh i just chalk up the 6-bolt pattern to having the portal conversion of the JL and JT lol
Yay he reveiwed it
Those wheels are impressive👌
what break rotors did u use
What overdrive portal gears did you use?
I just sent it on an ssd trail king from amain. Should be a fantastic 2nd wave lockdown project
Sounds great!
I got a $500 budget what would you recommend the axial scx10 3 gladiator or jeep JL traxxas trx 4 redact gen 8 axe edition?
Love the wheels and fenders.
Looks real nice! I traded my JKU for a JT! Love it!!
I Just want that body! I have a long wheelbase crawler I built using a bpc chassis and element drivetrain
Can’t wait to see on Operation 11 Charlie’s channel tomorrow night!
Nice video I look at your video all the time I like the gladiator nice jeep!!!
Glad you enjoy it!
I’m really interested in finding out what stage one means!! Love the your stuff . I
When you said there is some difference of the RTR from the kit version where you only talking about the JLU vs JT? I was under the impression that the JLU was exactly the same as the kit and no parts were subbed for the RTR.
great video brother, i gots ta git me one of them there trucks..lol hey man this may be a dumb question but, i've been in the hobby for many years and still have no idea what those metal collars are that are on some motor leads, any idea??
Wow it's a nice truck to start and will get the premium sbg upgrades, probs
Question. Could you hook something else to the 3rd channel besides the dig/2-speed?
You could put whatever you wanted there.
I can hear Josh rolling his eyes now over all that brass..... 😂 Or is it from the wine Friday night? 🤷♂️
At least it's pretty stealthy!
@@scalebuildersguild agreed... It's nice that they can coat the brass now...
Is it possible to make this truck rwd and 4wd through the transmission?
Not with that transmission, no.
I've found imo that a 2.2" rim with a 4.19" tire looks really nice and more scale.
it looks more stock not necessarily scale.
@@mojaverc1585 1.9's with 3.9 tires maybe..
mike Morrow yeah whatever looks good to you I just prefer the more modified look
@@mojaverc1585lol all good. Variety adds spice. Who wants the exact same style as everyone else
Well it would be nice if you should how to install the fender lights. Ali has ok stuff but no instructions and splicing into wires sucks.
No splicing required. They plug right into an open slot on your receiver. Thanks for watching!
I'm looking into this rig and you mentioned it has a 13.9 inch wheelbase. But on the axial website it says it has a 14 inch wheelbase and includes a larger more realistic 3 piece body. Do you know if there's a newer version of the gladiator?
13.9 and 14 are basically the same, maybe they rounded up? Thanks for watching!
When do you think these trucks will be back in stock?
They’re in stock right now at Amain.
Oh!
Thank you!
With the more aggressive offset (looks much better), did you have any rubbing issues with the tire at the lower rear of the front wheelwells when crawling? If so, what was your resolution? I’m working on getting mine set up with new wheels/tires and want to get much more aggressive with the offset, but at the same time I want to not rub when out on the rocks.
A little, but you can offset the rub with a longer shock. A lot depends on how wide your offset is!
What how much wider is the ssd brake rotor kit you put on ? ssd has 3 different offset options
3mm.
I need a place where I can just print out a list of all the goodies you put on there
Links are in the description!
i be having a hard time chooses what kind of truck I want as my crawler. one being money but mainly idk what body I want. it most likely is the sc 10 or trx 4 but what body. I like old power wagons but jeeps look ok too and the old chevy body seems like a classic. idk
Can you post the part numbers for the brake rotors and hex’s please?
Added to the description!
Scale Builder's Guild awesome! Thanks for the always great content!
Where did you find a 2.5mm socket to change the beadlock color to red?
SSD offers one. www.ssd-rc.com/2mm-hex-socket-tools.html
@@scalebuildersguild Awesome thank you a ton! I ordered these wheels and orange Beadlock rings after watching your video!
Any rubbing issues with the water stance I put extended portal shafts on my TRX defender and it rubs like crazy ended up taking them off
Rubbing? No. It wasn’t that much wider than stock.
When do we see a driving video. Love the truck.
Not until the build is complete!
Fair enough then.
What battery pack and charger do you recommend? My scxiii is stock for now
I like the Spektrum SMART line of products, takes a lot of guesswork out of the equation!
Thanks for the review
Great video, but that's nothing new. Lol. I already put the Rooftoptent and Sandladders. I ordered the front and rearbumper from CChand and the front fender flares as well. Installed the Mytrickrc lightkit for the JL, had to use the dremel for the rear rocklights to fit (3d printed holders) and next up is the AXE 540 2300KV and a Savox 1210SG. Already put some Boomracing Krait 1.9 rims with the Proline KM3 Mud terrain predator compound. All that bound to a DX5C with SR515.
Sounds great! Keep in mind, not everyone has this truck, or done what you have, and this is only stage 1!
@@scalebuildersguild Yeah, i really love the Gladiator. Very capable, out performed my friends TRX-4... #malicious pleasure..lol
What brand are those rock sliders
Stock, come with the truck.
Do you know if all ssd wheels fit over the scx10 iii portals? I’m looking at the double time wheels for my gladiator.
I'm sorry I can't confirm that they all will.
Any idea on how to find out without buying a set?
Never jumped into the initial 10 III releases. Actually hate the gladiator in real life but, the RC version looks great. Parts bin is already getting stocked full of hop-ups for it, when I buy it.
what lights
Did you add the brass covers to the rear as well?
I did, yes.
will the nuckkes also work on the scx10.3 kit jl?
Yep, same exact setup.
Why does is there a random hole in the middle of the rear links? That seems weird . Aside, This truck is fantastic! Likely even fantastic still with the random factory weakened links
Makes it easy to adjust them if you want to tweak. Stick a driver or hex wrench in there and spin it to increase or decrease the length overall!
Because the links have standard threads on one end and reverse threaded on the other end. One ball end is standard thread, one ball end is left hand thread. That way you don't need to pop a ball off to lengthen or shorten the link. Just stick a small Allen wrench in that "random" hole, turn clockwise to shorten the link. Counterclockwise to lengthen the link. These types of links have been used for years in the world of rc helicopters. They call them turnbuckles.
What brake rotor offset did you go with?
3mm
What is the part number for the front fenders with light's can't find it on his site.
Hi Art, here's where I got them, I'll also put the link in the description! www.aliexpress.com/i/1005001265457217.html
@@scalebuildersguild thank you have them coming keep up the good work my rc friend art aka the old bone head
I have a question, can plug a speedpack 1800 mah 7.2v 6 cell Ni-MH Battery, dynamite Brand in my new gladiator scx- 10 lll jeep please 🙏 help me out i jus wana take outside today its beautiful out here im in Wyoming, Mi
You can, but I'd make sure that the ESC is set to NIMH mode. You will need the programming card to run it in that mode though.