How To Adjust Honda CB350 CL350 Clutch Cable: Part 195
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2020
- Sign up for the E-Newsletter!
www.keeponwrenching.com
Let’s install and adjust the CL350 clutch cable! It's the same process for the Honda CB350 (CL350 Scrambler / SL350) and the CB360 (CL360 Scrambler / CJ360)
Subscribe for updates and follow along on social media!
/ bvmatson
/ bvmatson
This video series features the complete restoration of a 1972 CL350 Honda Scrambler motorcycle. The videos should help anyone whether working on a cafe racer build or a full-on original restoration. I'm definitely not an expert so please refer to your manuals for proper disassembly and assembly instructions. Please leave comments if you have any questions. I'll be happy to help answer questions if I can confidently provide solutions. Again, I'm not a professional. This is my 2nd Honda motorcycle restoration and I'm learning every single day. I'd love to hear your tips if you have better ways to do things. I hope you find the series useful and entertaining. I strive to show as much detail as possible so that the videos can be used as not only a how-to resource but also a reference for the placement and original set up of parts and systems.
If you don't have one already please get a manual for your specific project. There are many available online for download for free. Common Motor Collective, from which I source many of my replacement parts, has a fantastic resource on their website: bit.ly/CBManuals You can also join groups on Facebook and get involved in the community.
Keep on wrenching, Friends! b
Please consider supporting the channel by purchasing items that you’ll need to complete your vintage motorcycle restoration project. Any support is appreciated.
BUY & SUPPORT
WD-40: amzn.to/3hIzIzg
PB Blaster: amzn.to/2N9CVtR
JIS Screwdrivers (A MUST HAVE): amzn.to/2NasN43
Marvel Mystery Oil: amzn.to/2NfYMjj
Evapo-Rust: amzn.to/2YPF2Ix
Steel Wool: amzn.to/2YU0Anh
Colonel Brassy: amzn.to/2zMK1RX
Wizards Chrome Polish: amzn.to/3dcD7Tv
Turtle Wax: amzn.to/2zMTNDv
Feeler Gauges: amzn.to/2V39tdn
Anti-Seize Thread Lubricant: amzn.to/2Yg7rIB
Blue Thread Locker: amzn.to/2Yg7AM9
Red Thread Locker: amzn.to/2CixExK
Test Light: amzn.to/37IC10R
Compression Tester: amzn.to/3elhWAi
Snap Ring Pliers: amzn.to/3fH4sii
Multimeter: amzn.to/2YSjefj
Micro Fiber Towels: amzn.to/3elil5M
Shop Towels: amzn.to/3etBRg8
Your support is extremely appreciated. THANK YOU! - ยานยนต์และพาหนะ
Best video on the Internet. I have a 1973 Honda CB 350. The clutch had me lost for six months and your video had the clutch fixed in six minutes.
That’s so awesome to hear! Glad you got it sorted.
Sweet! You are always here for me. I'm removing the cable now though... But, I'll be back to watch again when installing. Hope you are still getting credit with the Amazon links cause I'm using them to buy stuff!
Amazon links do work. Thank you for supporting the channel. Much appreciated.
Sensational video!! I learned a BUNCH!! Thank you, Sir!
You’re welcome. Glad it helped.
Damn that bike is looking good!
It’s getting there!
I have had a lot of trouble trying to adjust my clutch it seems like it should be really easy but you're right it's more complicated than you might think good job though man.
I expected this to be a tough video full of frustration but it went so smooth. I’ll know for sure once it running. Fingers crossed.
@@KeepOnWrenching How did it all hold together now that it's been over a week?
Big help!!
Glad the video was helpful.
Hi Brian, Finding your posts very helpful on my CB250 rebuild. The metal rod that the ball bearing pushes against on my bike doesn't seem to move unless I pull it out by hand. Should it be sprung loaded or something ? I feel that when its all back together when the clutch lever is pulled nothing is going to happen ! I can pull the bar out quite a way, but am frightened to pull it right out, though probably could !
Many thanks, Andy
It should slide easily like that. It makes contact on the clutch basket on the other side of the motor.
I quit. Got the clutch installed (a bit stiff even with all new cables and I oiled them last night), lubed the chain, put in a new battery. No start. No indicator light for neutral. No indicator for the right turn signal but I do for the left. Head light hi/lo works. blinkers work but slow. Rear brake light works front no. Horn works. I can cross wire the starter solenoid and starter does great turning over the engine. Just button for stater does not work. I've bought full replacement harnesses with upgraded bulbs, flasher relays, reg/rect (two new sets). Ate that cost but that's ok. I saw where someone had to use a splitter diode in the headlight bucket but it didn't come with either upgrade kits.
I put a ton of work in this and loved it but I'm exhausted. I'm going to try and find someone to fix it (even though I've done everything right. Only thing I haven't replaced is the the two handle bar switches(controls).
Regardless I'm so disappointed in myself that this didn't work. I'll try to find someone to fix it or I'll just take it apart and sell of each piece and use the money to buy a rebuilt bike.
I'm running out of time and can't depend on another year working on this bike. Thanks though
You have come to way too far to quit. And you're no quitter. Asking for help is never a bad thing...second opinions can be very enlightening. Don't be disappointed in yourself. It's not you...it's the riddle that old bikes offer up. With that said, If I recall correctly, everything was working electrically (minus the starter button) prior to your most recent work. There is always a reason. Something dumb usually.
Why did you change to a new battery? Are you sure it is fully charged?
The clutch adjustment can be very finicky. Try to loosen the adjustment at the handlebars to see if you can get it to loosen up. If not, You just needs to adjust on the flat head on the cover. You'd be loosening so hopefully you can avoid the dreaded "pop".
The neutral light indicator is also something that you don't need to stress about. It's a very dirty area and that small green wire under the cover can be very problematic. Also, that switch contact can be filthy. I wouldn't stress that one at this point.
Check the grounds on those signals that don't light...that can also mess up the flasher speed, that and a low battery!
Diodes are only needed if are running LEDs. If you are, the diode is needed absolutely.
Did you install the small grounding wire from the bottom of the tachometer to the bottom of the clamp for the handlebars? It's a small double eye wire...just a few inches long. It essentially grounds you handlebars and your switches!
Take a step back. Get some time to breathe a bit. I know this stuff can be so frustrating. I've wanted to walk away many times too. So have MANY Wrenchers in the group. Approach it again with a clear mind. Make a list and try to see if there are some commonalities that lead you in the right direction. Sounds like it is mostly a wiring gremlin that you're fighting. They can be tracked down! Keep on wrenching, man! You will get this.
b
Always great seeing this bike come together. Is the clutch cable from common motors or is it a universal fit?
It’s from Common Motor. So glad it fit. Super paranoid about that now.
Cable broke today, rode the day with no clutch, very fun! Tried to not stop, but had to at a few lights. Neutral, than a good push off and pop 2nd and wheelie out!
Old folks thought I was nuts, and my dog was aboard for the mayhem also. Waiting on the new cable!!
Nice video. Where did you find the service manual?
I found the service manual on FB marketplace locally. What a find!
Did you have to make any further adjustments to the clutch cable once you got the bike running?
I don’t think so. Maybe a little on the handle end. But not a lot.
@@KeepOnWrenching thanks as always!
Hey Brian. At 8:27, the part you are tightening that secures the cable into the plate, what is that called? I need to order one for my CB450 rebuild. thank you.
The nuts on top of the engine sprocket cover? Those were part of the clutch cable itself. I believe the 450s have a different setup. There is actually a bracket. Check the cmsnl website. You should be able to track down a part number.
Could you be looking for part #1? www.cmsnl.com/honda-cb450k2-usa_model50701/partslist/0028.html#.X4-hgMD3bDs
@@KeepOnWrenching that's it! thanks
Hi Brian, I did pretty much everything you showed to clean the clutch actuator, but once I reassembled everything, the gear lever no longer shifts, it just moves up and down freely, still in neutral. It shifted fine before I took it all apart, now I’m not sure what I did wrong. Thoughts? Thanks!
Is that ball bearing in the middle of the bearing for the clutch rod?
@@KeepOnWrenching yup, I put it in there with grease. The clutch seems to have adjusted fine too.
Issues with the shifter? Could that linkage be flipped. It’s kind of a puzzle to put back on the studs. Hard to imagine what is happening. You could IG message with video?
I’m having this same problem. Bought a new clutch cable and thought I was in for an easy replacement today. Now I can’t shift up to second. Any ideas? Thanks!
@@Vincentcamever find a solution? I’m having the same problem now
You talk of the clutching popping on you? As something that could happen. I think this might’ve happened to me on my 69 cl350. What makes that happen and how does one fix it?
Too tight. It’ll pop out of the guide and need to be reset if it is too tight. There’s a sweet spot. Gotta follow those directions precisely. You’ll get it!
Any idea how big the ball bearing is? I lost the one that came out and am trying to use a ball bearing like goes to forks.
lol these u tube guys this is how you do it after reading a manual lol
Reading a manual helps.
Apparently you don’t understand that people have different levels of reading comprehension. There are also people who even though they are avid readers, process instructions much better visually. One of TH-cam’s greatest benefits is having people who take the time to show us how to do things without the dryness of a manual. Thanks Brian!
What year is motorcycle
68-72
And I found where you heard the no starting without exhaust on the bike…..
Still waiting on an update.
@@KeepOnWrenching still waiting on a reason to give one. Been tooooooooo busy for wrenching lately my dude!