Route & Install Wiring Harness on a Honda CB350 CL350 Motorcycle

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 72

  • @Yeastlord
    @Yeastlord 2 ปีที่แล้ว +2

    Just picked up a 71 cl350 your videos are so valuable for someone like me with no experience with motorcycles, so thank you!

    • @KeepOnWrenching
      @KeepOnWrenching  2 ปีที่แล้ว

      So great to hear that. Good luck with your project! Thank you.

  • @sumdawgtwigg
    @sumdawgtwigg 2 ปีที่แล้ว +1

    Fixing up a cb350 right now and the wiring harness has been hacked all
    To pieces. This gives me the confidence to take it out and replace it with a new one. Thank you

  • @dalecoddington
    @dalecoddington ปีที่แล้ว +1

    Thank you for taking the time to make this video! This was a lifesaver for me.

  • @Jenuin
    @Jenuin 3 หลายเดือนก่อน +2

    Thank you. I’m still working on mine but this was helpful.

    • @KeepOnWrenching
      @KeepOnWrenching  3 หลายเดือนก่อน +1

      Fantastic! Good luck moving forward.

  • @brad7861
    @brad7861 4 ปีที่แล้ว +6

    This video is amazing. Thanks for tackling such an intimidating part of the bike build and turning it into a fun video!

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว +1

      Thanks, man! I appreciate the feedback. That’s exactly what this series is all about. Keep on wrenching!

  • @vintagebiker
    @vintagebiker 3 ปีที่แล้ว +1

    Hey thanks for doing this video! Wasn't worried about the wiring but the harness routing was a mystery. Subscribed now.

    • @KeepOnWrenching
      @KeepOnWrenching  3 ปีที่แล้ว

      Thanks, John. Glad you found the video useful.

  • @robertmedrano9790
    @robertmedrano9790 ปีที่แล้ว +1

    Well done, very nice and simple, great teaching, thank you very much.

    • @KeepOnWrenching
      @KeepOnWrenching  ปีที่แล้ว

      My pleasure! Glad you found it useful.

  • @woncameron24
    @woncameron24 4 ปีที่แล้ว +1

    perfect timing. literally came inside from the garage with a routing question. thx for the details.

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      Graig Cameron glad the video helped you out!

  • @jhafanador69
    @jhafanador69 3 ปีที่แล้ว +1

    this is super helpful. gonna be doing my cb360 this weekend. thanks.

  • @maory2515
    @maory2515 4 ปีที่แล้ว +1

    Amazing content! Very thorough and enjoyable! Just what I need to start tearing up and rebuilding my 68' CB350-K0 twin.

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      So glad you found the series and are finding it useful.

  • @AyaanAhmado
    @AyaanAhmado 4 ปีที่แล้ว +1

    These videos are great you really help me out man this is crazy the amount of details you put in the videos thanks

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      My pleasure, man! I’m glad to hear they are helpful.

  • @jeffmoat6820
    @jeffmoat6820 4 ปีที่แล้ว +1

    Brian, this is incredibly helpful! Thanks

  • @spencerforbes1683
    @spencerforbes1683 4 ปีที่แล้ว +1

    Just what I'd asked for, thanks Brian

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      Spencer Forbes so glad it’s helpful. It’s one of those questions I could never find really solid answers for so I’m glad it’s useful. Thanks for the feedback.

  • @greghamilton5461
    @greghamilton5461 4 ปีที่แล้ว +1

    Very informative I have to do two bikes needing complete rewire.

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      Greg Hamilton that’s perfect. I thought this one would be helpful. Pretty common question. Good luck on those builds!

  • @joshbailey1011
    @joshbailey1011 4 ปีที่แล้ว +1

    Thanks, for all the stellar content, you have helped me a ton with tips and tricks on my CB550 project.
    Shake your paint!

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      Josh Bailey so great to hear, man. Thanks for the feedback. Let’s get our bikes back on the road. I’m happy to hear that the vids are useful outside the 350 builds. Also, the reference to shake your paint is impressive. Lol

  • @98katman
    @98katman 2 ปีที่แล้ว +1

    KUDOS excellent video.
    Next you need to restore a 1977 Yamaha RD 400D preferably red in color. Hint, hint, hint!

  • @Khoudi_91
    @Khoudi_91 4 ปีที่แล้ว +1

    woah this was exactly what I was looking for!

  • @sparckmoto8533
    @sparckmoto8533 4 ปีที่แล้ว +1

    Looking good!

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      Thanks! Really solid setup that you sell. Makes it all pretty easy! A+

  • @minifigme25
    @minifigme25 3 ปีที่แล้ว +1

    Just got a 1970 SL350 and I really need to know if this harness is the same as the CL/CB???

    • @KeepOnWrenching
      @KeepOnWrenching  3 ปีที่แล้ว

      Totally the same.

    • @KeepOnWrenching
      @KeepOnWrenching  3 ปีที่แล้ว

      I haven’t dealt with an sl but I’d assume it’s all generally the same.

    • @minifigme25
      @minifigme25 3 ปีที่แล้ว

      I will get a harness coming and keep you updated then. Thank you so much! 🙏

  • @Lakehouseobust
    @Lakehouseobust 2 ปีที่แล้ว +2

    You totally sound like Jack Black

  • @edwardm.9150
    @edwardm.9150 2 ปีที่แล้ว +1

    Hello......I can't figure where that one larger black wire with "ring" terminal goes...You are holding it at 11:16 in video and are calling it a Ground wire. But mine is "hot"......when my Red heavy wire with "ring" terminal is connected to positive on battery. Please help....

    • @KeepOnWrenching
      @KeepOnWrenching  2 ปีที่แล้ว

      Check out these vids. There are two parts. Here’s part one. th-cam.com/video/IoQFTdENcOI/w-d-xo.html

  • @jamiestanley8774
    @jamiestanley8774 8 หลายเดือนก่อน +1

    Once your set to wire up hand controls etc . Just remember right / left control etc . And connect colour to colour ? Is that about right 🤯🥴

    • @KeepOnWrenching
      @KeepOnWrenching  8 หลายเดือนก่อน

      Generally. But there are nuances. Sounds a little easier than it usually ends up being.

  • @richardb5298
    @richardb5298 3 ปีที่แล้ว

    Could I done this job without removing the engine but just carbs battery and air filter??

  • @larrykruger9243
    @larrykruger9243 3 ปีที่แล้ว

    Could I talk to you by phone. I have a round plug coming out of the chain cover area for the charging system. How do I plug it into the harness??????

  • @jacklipp955
    @jacklipp955 4 ปีที่แล้ว +1

    Anychance theres a second part to this video where you hook the wires to the bike and engine?

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว +1

      Jack Lippin yeah. Literally the next video in the playlist. Engine is still out so I haven’t wired that yet. The wiring video takes care of lights and switches. Once I get the engine in I’ll do a video on the rest.

    • @jacklipp955
      @jacklipp955 4 ปีที่แล้ว +1

      @@KeepOnWrenching okay cool! ill be waiting haha i am at the point on my build where i need a new harness, im going to try to get all the lights hooked up and i will stay posted for when the engine goes in

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      It might be a little white. Got a ways to go. Getting all the stuff out of the way in part 1 will definitely help you. One bridge at a time!

  • @BEVO_vs_The_World
    @BEVO_vs_The_World 3 ปีที่แล้ว +1

    Those fork ears... 🤤

    • @KeepOnWrenching
      @KeepOnWrenching  3 ปีที่แล้ว +1

      Yeah...aren’t they nice!?

    • @BEVO_vs_The_World
      @BEVO_vs_The_World 3 ปีที่แล้ว

      @@KeepOnWrenching don’t mind me while I’m being jealous. 😂

  • @hrgiyzueghe
    @hrgiyzueghe 3 ปีที่แล้ว +1

    Hey guys, anyone knows how to heat crimp these transparent covers like the factory does?

  • @salsgym4635
    @salsgym4635 4 ปีที่แล้ว +1

    Is This the same for a CB360?

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว

      I would assume the same ideas apply.

  • @rebelreloading5265
    @rebelreloading5265 4 ปีที่แล้ว +1

    The wire connected to the left nut inside the headlight housing disconnected from my harness I don’t know where it goes.

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว +1

      It’s a ground. Any green hub in the harness will do. There should be a couple 4-ports on a green that you can plug into.

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว +1

      More details are in the next video.

    • @rebelreloading5265
      @rebelreloading5265 4 ปีที่แล้ว +1

      Looks like it connects to the left front turn signal ground wire and plugs into the connector with double green on the other side. Going by the diagram. I will have to look. I appreciate it.

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว +1

      Matt Price ground is ground. So as long as it’s green you should be good!

    • @rebelreloading5265
      @rebelreloading5265 4 ปีที่แล้ว

      It’s my first bike build and I don’t want to cause a fire lol 😆 I am trying to leave the harness untouched with the exception of upgrading the battery charging system, slim lithium battery and turn signals. I’m doing a wire tuck, it’s pretty easy! Thank you very much for making these videos. I will follow the rest of them in my wiring journey 👍

  • @dcafe24
    @dcafe24 4 ปีที่แล้ว +1

    Will this fit on a 71 cb175

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว +1

      No. You’ll need to find the right harness for your model. I’m sure there are variations but the routing is likely very similar.

    • @dcafe24
      @dcafe24 4 ปีที่แล้ว +1

      @@KeepOnWrenching thanks sparckmoto offers a universal harnesses. It looks very similar to what I need.

    • @KeepOnWrenching
      @KeepOnWrenching  4 ปีที่แล้ว +1

      The one I have is for 350s specifically. The Honda color code on wires is likely universal. So it’ just a matter of getting things connected. If they say it’s universal for all models...it’s worth a shot. Their harnesses rock.