How To Replace Infiniti G35 Pulleys & Belts
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2016
- Welcome to ShopLifeTV!
This is a DIY video on how to change the pulleys and belts on an Infiniti G35. If you have any questions please let me know.
Instagram: @ShopLifeTV
Disclaimer: Not sponsored Disclaimer: The product links provided are often associated with an affiliate. When using any of the affiliate links I may get compensated for any products purchased using the link. This compensation does not affect my views on the product. - ยานยนต์และพาหนะ
This is probably the best "how to" mechanic video I've ever seen. No details skipped. Great lighting. Clear visibility of where and what they're working on. Thanks guys!
They were trying to charge me 1200 to replace all of my pulleys and belts... haha.. bullshit. Thank god for TH-cam! You’re a legend bro!! Thank you for this!!
what more can I say? After a weekend of pushing the G35 (120+4.5r) through historic R66 and 95N. It was imperative to see Dr. J. Blessed to know such a genuine person, brought it back it to life! From the ashes rose Golden Eagle...to be continue...
Sincere thanks man! I'm NOT a mechanic. I'm a musician. See the problem? I used this video for my FX35 with great success. Wrench sizes and nut locations were spot on. I ended up just tightening drive belt, eliminated the cold start screeching completely and saved 50 bucks. Thanks again!
Great video just great! You give out a lot of details down to the part numbers, to the size of the screws and tools used! This helped me a lot, thank you once again!
so many helpful vids. I have a e46 m3 and a 05 G35. your channel is perfect imo, keep it up! btw this was so helpful to replace my belt tomorrow
Thank you for posting! I'm changing my 2003 G35 belts tomorrow and this answered all my questions.
Best video on YT for changing these VQ belts. You saved me a lot of time and money,will be doing Dayco belts very soon!
loved your video, it was very thorough on explaining everything and even showing how its done! thanks to you i got the confidence to do this myself. thanks alot!
Thanks for this great video mahn it really helped me a lot wish you had more in dept videos on Gz though but keep it up mahn I’ll be looking forward to some more great content 🙏🏽🇯🇲🙏🏽
Thank you so much! I followed this step by step on my 2006 Nissan 350Z.
Good video. Appreciate the input on the aftermarket parts
You’re the best! Your explanation for step by step are very helpful. Need to see how to replace timing belt and water pump for Infiniti car if any.
Awesome videos man. I have a e46 325i myself and i use your videos to help maintain my car. BUT my girlfriend has an 07 g35 coupe. IF possible, could you do more videos on these g35s?! that'd be awesome
This was very informative and well made. That you sir
Thanks 🙏 for the Vids, now I can change it on my 06 g35 sports coupe 🤙🏼🤙🏼
Thanks man I appreciate it you doing step by step even with the pulley I have the same exact type car I know my AC belt is chewed up so I need to replace that so I'm going to go ahead and replace both belts so this helps a lot
New subs in the building 🤙🏼🤙🏼
I would definitely advise pulling the fuel pump fuse and disconnecting the negative post before cranking an engine even to tighten a low torque fan nut like mentioned at 17:01. Especially with high compression engines, one strong slip equals - "Look mom, no hands!"
Great 👍 I just replaced my Alternator and shall make sure I replace the spacer for the tensioner , Thanks a million Sky
No problem 👍
thankyou ....Awesome explanation .i loved it
Excellent job. Thanks.
well done..Guy. Thank you!!
Thanks and good job. I'm just gonna get me some good bearings and press them into the OEM pulley instead of buying all new.
Great video. Thanks!
Hey man so my ac idler pulley won’t add tension to the belt when I righty righty the bolt under the car any idea what I did wrong? It was tightening just fine before? 🤷♂️🤷♂️
always looks easy on video! but in reality so difficalt
awesome video very helpfull thank you
great video bro, i have to replace mine soon
great video thanks homie.
Thank you SO much
Great video
I wish you the included AC clutch removal on this G35. This happens to be a common problem on G35
Do you happen to know main crank pulley bolt torque specs or instructions on how to put it back like if i need Loctite thanks in advance
Do I need to put the dust shield on? Or is it ok without
What's that shield called with the three bolts right about the belt as soon as you put the belt back on. Looks like oil want to drip out of it on mine
nice video good job
Im a fan bro. How u record your video ?
great vid
Awesome thanks
great video , planning on using this to do my 05 g35 coupe , I have the rev up so I believe my fans are electrical..
reason I'm doing my belts is bc whenever I turn my steering wheel to the far left/right , there's a loud screech on Cold start , and minor screech when warmed up .
could that be bc of the belt being too tight or the belt itself ?
Did you ever find out what it was? I’m having the same problem.
You're the shit bro, thanks for these vids. Btw, you're vids are for the sedan. I have the 2005 G35 coupe. As far as everything in this video is it the same setup?
GDoubleOD go under is so much easier.....don’t need to remove the fan.
All of this is easy to do. Why do I pay mechanic's to do simple fixes like this? It's my time and schedule.... well time and schedule I will make you mine to do my own car repairs and save me a dollar. Thanks Jason.
Good video
@shoplifetv Please help me I bought a 2001 Nissan Skyline INFINITI 300GT Sedan 3.0L V6 recently but every time I start the car the engine would squeal and if I rev it the noise gets abit louder but after like 10min of warming the car it the noise settle downs abit but you still can hear it a tinny bit. So my Question is the problem coming from the Serpentine Belt + Belt Tensioner Idle Pully ? If so should i replace both my belts & both tensions pullys at the same time or just the belt only ? Also one last Important Question and that is can I use the Serpentine Belt & idle Tension Pully from a Nissan 350Z (Z33) 3.5L V6 24Valve and put it on the Nissan G35/300GT V35 Car since they are the same engine anyways right ???
What’s that metal line under the right pulley he’s working on? Please I’ve been wondering so hard
I was driving and my tensioner pulley i guess slid off and everything fell down, thankfully I have a z1 undertray and it caught the pulley, the nut, and the dust shield but i didn’t see the spacer that goes on the dust shield, is that necessary?
I wish you would say which way you unloosen the 4 bolts on the fan connected to the pulley cause mine don’t want to come off if I’m loosening them left I even tryed going right. I’m lost, help!
Question: can you leave the disconnected fan in the car, just tuck it away on the fan shroud.. negating the need to take out the fan and shroud… is there enough room to remove and replace belts if this is a possibility?
Need some help bro my ac tensioner bolt won't loosen it's super tight and bends a bit when I try to loosen or tighten it
How'd you clean the spilled antifreeze
Great video. I thought you were going to do a fan delete.
At 2:31, does anyone know what the hose is that wraps around the front of the engine , mine was recently shredded up by one of my belts .
thank you
Can I leave the fan off just put the bolts back in?
Please clarify order of dust shield and spacer. So is the order dust shield , spacer, pulley, dust shield, spacer, washer , nut on the ac side? You went to fast on that part of the video.
Then also clarity the alternator/ps side.
Because I'm doing my 2003 G35, and pretty sure there's also a washer right before putting the nut back on.
nice video
Around how much does that usually go for ?
Hey mate, great video!! Is the G35 identical to a Nissan 350GT? Everything seems very similar if not the same...
Ita the same car bruh
Could you please tell me for a 2003 g35 sedan what size belt i need. I went to buy one and they said there are 2 sizes 37-7/8 and 37-1/2. Thanks a lot!!!
Jose M if you have an early model 2003 with the mechanical fan, you will need the longer one. If you have the electric fan, the shorter one will work. Just replaced mine today
I have a question for anyone that can answer, but at 9:05 is the 89150 pulley different from the first one? I’m trying to change mine but I’m new to this and don’t know if I bought the right piece
thanks for the video, what size ac belt goes on a 03 G35 36 1/2 or the 37 1/2?
What is the name of the first belt you removed?
So my radio and ac/heater is not working you know what that could be?
my 06g35 coupe manual does this weird noise and feels like minor shaking with the car key switch positioned ON !why ?please help.
hi I have the exact same vehicle and love the video by the way,? I have to buy and replace the pulleys as well I notice cracks on my serpentine belt I was going to change that only, you only had one fan, so im going to use your video to replace the belts. i have many ? to ask you but thank you so much
How much do these assembly’s usually cost ?
You should add some protectant to the belts, might make em last longer.
No, does the apposite
What size is the belt that you used
If it wasn't for this video you would not know the Dayco 89156 part # for the A/C pulley side. Has anyone besides me searched recently both pulleys. You can only get 89150 for the other side. Total pain, it's like Infiniti told the third party makers you can only sell one pulley. Even Dayco doesn't list the 89156 for the G25. A++ on the video review, even though l went underneath to change belts.
Tension screws?! Seems like hydrualic/spring loaded tensioner (like on e46) would be preferable (no worries about under/over tightening)
So how would I know if the squeaky noise is coming from the belts or just the pulleys my g35 also makes the squeaky noise when I turn it on then it goes away when I drive off ..
Spray wd 40 on the tensioner pulley. If the squeaking noise goes away immediately. That means your pulley is worn out
What are the part numbers for the pulleys I only seen 1
Helped Replace both belts on my friends G25. After a week getting a 3 second sqeak on cold start-up. Is it possible the belts are to tight?
Ever find out what it was??
@@zuvk4190 Belts were to loose
How do you clean the coolant that comes out when you disconnect the hose?
You replace the coolant
Can you leave links to the pulleys
My name is Pamela, I have a situation. I have a 2000 Infinity I30. I was told my fan belt was broke that cools the radiator. I had went and bought the belt, even told the salesman what kind of car I had. He sold me the built that supposedly went to my model and make of my car. Started to change it out. To my surprise the fans had wires running to it and no belt. So my question is does an Infinity i30 2000 have a fan belt to cool radiator?
Pamela Robbins if there's wires then it's an electric fan, most likely you're thinking of the water pump belt that broke
If you need to change a belt when you see cracks on the ribs (12:20), you might end up changing it every oil change. The 2006 G35 has electric fans attached to the radiator shroud. It is very easy to change belts on it.
Do I need to loosen the pulley if I just want to replace the belts?
yes, the pulley wont drop down if it is still tight. you wont be able to loosen the adjustment bolt.
Why did you need to replace the tensioner pulleys ?
Noise
Why do the pullies n3ed to be replaced?
Would this be the same for the Vq35hr?
Matthew most likely, HR just has the rev up tuned software
What is the part number for the belts
my second problems are the ac stop blowing cold air! inside the g35 gets hot. plus the rpm is higher than normal the car revs up which sometimes I have to hit the brakes cause it will keep going without my feet on the gas
Your gas valve could be messed up
Those hose and nuts are loose as f. Just had to say that. Thank you so much. I will be doing mine tomorrow. A mechanic messed mine up two weeks ago.
Should've soaked that belt in 303 protectant! Would've been supple and new again
You can press these bearings out.
For me it only does it when it’s cold. Why is that?
What’s the purpose of replacing these tension pulleys?
Noise.
You might be able to replace or regressed the bearings, but I suspect the part is inexpensive?
About how much it cost you belt and pulley?
Around 80$ on eBay, for all two pulleys and two belts it’s around 150$
my g35 has been squeaking, what could that be? the belts?
Belts, pulley or tension on belts needs to be adjusted.
Johnny White when I drive it squeaks is that bad ?
Brooo the concentrated coolant needs to be mixed 1:1 before going into the radiator. Not just a little water at the end like you did.
My fan is not coming off automatically
I have two fans 😳 4:27
U don't have to do all that if you do it from the bottom like its done at the dealership
Totally unnecessary to remove air box and fan. Way easier to lift the car and loosen tensioners from underneath.
anybody else stripped their damn screws trying to get them off?
easiest way to do this is remove the front bumper only takes 15 min
I paid 600 dollars 😢
AREN'T YOU A INDIAN HINDU WHERE IS YOUR TOYOTA ? BRO
Shut your dumb ass up clown