ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Serpentine Belt Replacement - INFINITI G35 🔧 NISSAN 350z
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2018
- A worn serpentine belt will usually cause noises, squeaking, squealing or chirping-sounds, which is the warning to have it looked at. Once the belt breaks, the engine will not function properly. The car will not be able to be driven. If the engine is allowed to run without a working drive belt, it could overheat because the water pump will not be able to circulate antifreeze through the radiator.
How to remove serpentine belt. Serpentine belt location, inspection, removal and repair.
I love TH-cam and decided instead of consuming, I wanted to start creating! So please subscribe and I'll do my best to create the most entertaining and helpful videos possible for the G35.
Please subscribe to my channel.
2005 G35 - 350 HP G35 - Dyno Tuned Gain +37whp/45wtq...... • INFINITI G35 / NISSAN ...
Performance Mods:
- KW v3 Coilovers
- Injen CAI
- NWP 75mm throttle body
- Motordyne MREV2
- Motordyne 5/16th spacer
- Motordyne v3 ART pipes
- Motordyne Shockwave TDX2 exhaust
#Infiniti
#InfinitiQ60
#InfinitiG35
#Motordyne
$25 for both: Serpentine Belt PK060465 and Belt PK040372
Motordyne G35 can I get the link ?
@@omarmartinez6155 Just copy the numbers and search in google. First thing that pops up is Amazon. Just got mine today.
@Rex Erection Yes the 350z and G35 share the same VQ engine. You have a DE like me so yes if you buy them off amazon they will fit.
@Rex Erection Nice man. It's a super easy job, hardest part is getting the under tray off. I didn't use a tape measure I just went by feel. Keep in mind you might have to go back and re-tighten by a couple turns the belts once they break in. Another good video I found to help was by mils garage but like I said super easy.
You recommend getting a cheap one over a expensive serpentine belt?!
Everytime something goes wrong on my G. You upload the repair I need. Never stop bro, your going places and helping people.
Same here. It's super ironic.
Same, had an ignition coil go bad couple days ago, last week he uploaded a video on how to replace them
just bought a used g35 4 days ago and unfortunately i noticed the belts were cracking just like yours and this video helped me understand how to fix it and it was my first time i fully worked on my car on my own
Men turn wrenches, welcome to the club and congratulations on getting a G!
Thank you man; I’ve been meaning to change my Belts for months now - your video made me realize it was easier than I thought. 👍
You're a beast at showing the detailed work and especially with one hand while recording 👌
Your car looks so clean , it looks like you take it to the car wash every single day
This Video saved me unnecessary expenses thinking I needed new idle pulleys...The deflection by your notes shows a deflection that in seens tighter then most common cars...Well following your book specs, no more belt squeal...Thank You for your excellent G35 DIY videos.
Best Video in The Tube for these procedures!!! Glad you showed the Part Numbers as well, getting work done On my G today and this was extremely Helpful!!! Thank you Motordyne!!!
I thought it was going to be really difficult, But now I’m going to replace them rn Thank u , u’re awesome
You have it backwards. Loosen the center of pulley nut slightly. That loosens the adjuster. Then go CCW on the adjuster nut to loosen the belt. Install the belt and then go CWE on the adjuster nut to tighten. When the proper tension is reached, tighten the pulley nut.
Great video. Auto maintenance on the airport parking garage rooftop, unique.❤️
Noticed that my AC belt was just as worn as yours. Thanks for video!
I did my A/C belt today, the last belt had shredded It worked flawlessly. Just FYI the part numbers have changed on these from autozone, I only bought the AC Belt which is Continental 4040372 --- 4PK0945
I jus bought one as my second car a gem love it and these videos help me with every issue I had buying it bc the guy didn't change the belts sensors or anything lol thank you for the help bro
Nice. I'm going to take this job on. My ac belt is cracked like yours and screams on cold mornings.
I have the same problem but idk if it’s a pulley or serpentine belt !! My g starts up and makes a LOUD noise but goes away after a while please help
It should be a crime to have a G and not be subscribed to your channel
Life in prison tbh
Thank you !!! Replaced my belts easily with this video . Both belts came out to total of 45$ at autozone for the continental brand
"And then remove your under tray" i think your the only one that still has stock undertray lol. Your whole engine bay area, top and bottom, is cleaner than any I've seen. Nice vid, needed this.
:53 no my first mod a long long time ago was TBW or toll booth willey's aluminum undertray powder coated in black. It's there laying on the ground at 53 seconds into the video, no stock undertray. Thanks for watching and the compliments!
I have mine
I know this video is old but it was a huge help!! Thank you!!! Belts went on great because of this. Cheers!
Bro help I’m trynna but one he said it needs a pulley assembly should it still run or no ?
Still saving me till this day everybody else says take off your fans but to take of your fans you got to remove a coolant hose which leads to getting air into the coolants system and not getting hot air just a snowball affect but thankyou didn’t realize I could do it without removing the fans
Recently bought an 04 G35 and will be doing this. Thank you for this video.
i just got my G n i already fw the channel
Great vid as always, I have used your channel to do almost everything on my 2007 g35 coupe! Keep up the great work bro.
Love your channel man not many ppl do there own work on the g35s very underrated channel
@Rex Erection Hahahhahahahahha
Hello dear author,
love your videos!
I own G35 coupe for around 7 years.
Have changed pulleys 6 years ago.
1 week ago, something has started to prevent cranking the engine: 1st day it was one more additional slow rotation of a starter, then it required a little more and more everyday.
Yesterday, starter rotated too slowly, exact symptom as if battery is dead (but its new!) - all electronics turn off at that moment. I brought a new battery to check, but the result is the same - alternator stuck after 0.5 rotation and my aftermarket onboard multimeter showed zero voltage while cranking (because it's minimum is 5V), but was back to 12.6V after released key.
Can you advice, what to check next?
Thanks in advance!
Kalashster it’s your starter. Happened to me twice as well. Give the starter a few taps and it’ll be fine.
@@N54_335i Thank you so much! I've already repaired that starter using high quality materials. Total repair cost was 65GEL (22$) :)
Hey man, have you made a video on how to properly/safely jack up the G35 and where to place jack stands, etc?
it’s right on the side where the skirt meets the metal lip
you’ll feel it
@@zacharydavis9129 I forget what I was doing on the car but I think that point wasn't accessible. I now have a better jack and ramps as well, so I'm good to go now. I've also sold the car since lol
Hi!First of all I have to say your car looks cool👌🏻. Because you are a INFINITI owner,I want to know what is your thought on the 2015 INFINITI Q50S,I am considering buying a used one.
I’m interesting in why you didn’t go with new oem belts.
Great video, and excellent method to make sure belts have the correct tension.
🙌 thank you!
Very informative
Just got a G. What was the reason to jack up the car and remove the under shield? Didn’t seem like you needed to go under to work or anything.
I would get the gates brand belts from oreillys they have 3 yr warranty and good quality!
I brought a belt for alternator from z1 Motorsport it said 03-06 for alternator crank pulley my car is a 04 g35x awd but belt doesn’t fit I lowered the pulley the lowest it could go still didn’t want to go on so did I order the wrong belt
easy work, thank you man.
is it recommend to change the tensioner if we replace both belts?
So when it says 03-06 that means 03 thru 06 my car is a 04 so y belt don’t fit I did the same thing n ur video belt to short to go on I tried different ways to slip it on but it won’t go I lowered the pulley the lowest it could go
I tried changing mu belts with the same part number and they don’t fit at all lmao.
great videos.
Oh shit its that easy? Mine are cracked too probably never been changed im at 140k right now just got this car maybe 3 months ago, seems to be in near perfect condition but I can tell most of the parts have never been changed including the belt. Anything else I should have replaced or checked?
Wait what? the water pump is timing belt driven not serpentine belt driven.
At least on the G37
How much is 25 pond feet of torque . How do I know how much pressure to apply?
You should check out the bell raceworks rear diff brace!
I have a Bad catalytic converter code on a 182k 2005 coupe. Do you think cataclean would help or do you think they’re most likely fried due to the car being so rich. Also do you think this is a job for professionals? Thank you I love your content I’ve never seen someone so precise and efficient when it comes to vehicle maintenance.
Just replaced both CATS, I had a local muffler shop do it for $400 total, my car runs WAYYYY better. My advice, don't try to use any solvents, just put cats instead.
Did you do this after u bleed the system becuase i believe my car started overheating after they changed alternator
To change the alternator, the bolt is too long, you have to remove the radiator fans to get the bolt out. To remove the fans, you have to remove the radiator hose on the top passenger side. So your hunch is right. Bleed the system as shown in the video, you should have no problems.
@@MotordyneG35 i also replaced the thermostat and the hose that connects to the housing is cold while the passanger one is hot can that be cause of air as well in the cooling system
@@johnamezcua7414 ...Did you watch this video? th-cam.com/video/o13izIyEI4o/w-d-xo.html
Would these belts work for a g35x 2007
You gonna change the rims ? They dont do the car justice and especially with the motordyne catback set up to me.
Anyone know the part # or where to find the Pully for the ac
Is changing a 2008 G37's belts that much different?
Where do you put the tape measure? Is it in the pulley?
literally a life saver man keep it up!
Where are you setting the tape measure at? Im confused
Masked NME that’s what I wanted to know too haha. I hope he answers this question.
If I understand correctly it doesn’t really matter where the tape measure is placed. He’s just arbitrarily placing it over a free floating segment of belt between two pulleys.
The purpose is then to make sure that there is the correct amount of play on the belt when the belt is pressed.
How is Phoenix in the summer time?
Will this go on my 2007?
Do both nuts take a 12mm socket?
Whata the size of the idler pulley screw ?
A shop in Jersey tried to charge me 600 dollars for this right desi auto care.
I have 03 g35 sedan which belts please?
$25 for both: Serpentine Belt PK060465 and Belt PK040372
The auto parts says there is 2 different belts for AC belt?
Again this is for 03 infinity g35 sedan
Could you make a video of must have tools / types of sockets... that you have used while working on the g's maintenance so far?
I want to get started on mine 350z and am kinda lost at what tools to start buying. I have not personally done any work on any of my cars yet.
Just get a general tool box and a torque wrench. I worked on all my friends cars and my G using simple things. Anything you don't have you can just rent from autozone.
Have you or know anyone who has or had the gas problem with their infiniti. I replaced both fuel pumps but still runs out of gas at Quarter line before E.
It's a common problem on the G.
@@ulrblitzer what is it how much is it
@@brokeboijd6983 fuel level sender. Google it.
How would I know if my Pulleys are bad?
When the bearings go out the pulleys will start to whine.
My G squeals when’s it’s really cold out when I first start it but then stops.
@@jspansera ....loose belt is the reason. Time to change.
Thanks for the video man ! Must be a bitch doing it with one hand on the camera
What's