@Car Cleaning Guru no way. Not a robot personality. Your narration isnt just typical explanation in other channels detailing videos, but yours is a journey and story we are being told. Its descriptive, it teaches, and its informative, not full of garbage. Always look forward to your vids.
Great job. I usually do this every time i change from summer to winter tires or vice versa. I use silicone spray as a sort of dressing and water dispersant on the plastic and rubber parts, instead of the water based dressing, as i think it lasts a bit longer and can actually help with keeping suspension bushings soft and flexible. Further more I use some aerosol cavity wax where i can fit the nozzle in and usually give my rusty metal components a very quick lick of spray paint.
I found that cleaning arches is more important than just making them look nice but for keeping suspension components working well. I had coilovers that squeeked and found that cleaning all the crap out of them helped a lot
Thanks Joe, just a UK diy driveway detailer of my own family fleet, I have been very pleased with 🚗 Gods range, for all round value at my local Tetrosyl car parts shop, in terms of 💷vfm and the off the shelf bigger volumes of their potions. I wish more shops not just online sold 5ltrs as well because fortnightly 🚐🚙🚗 family fleet clean day requires semi bulk useage, but not needing to go OTT buying 25ltr size product. Their red diesel looking pre wash and purple bleeding Iron fall out I rate highly too. I cannot praise Bilt Hamber snow foam enough for leaving such a nice gloss on the paintwork👌and BH’s protection products to motor underside and bay area metals also is top notch as you so elequently spoke about. All the best for this years content CG.
Hey Joe, really enjoyed that. I have the same Tein coilovers as you on my CRZ. I plan to do this in spring and remove the liner to treat any rust hiding behind them and a bit of underseal. Be sure to watch out for that video. Lots more crz content to come
Great video! Love the voice! Have I mentioned before now that you should consider voice acting. Your voice is easy on the ears. Water wasting is only mentioned by those around the globe living in aired climates. Here in Canada we have lots of water, but also use lots of road salts that rush out our vehicles. Use all the water you need to get all those road contaminants off of your car!
Nice job on both the wheel and the arch, did a qiuck job on mine last week with the wheels on just using an underbody lance, couldn't believe the amount of crud that came out
Looks great. I do the same in Spring after snow is done and sand is cleaned off the roads. Interesting to learn about Atom Mac. We only recently have we been able to get BH in the US. The problem with rusted rotors has only had one solution for us and that’s Hyde’s Serum Rust Stopper. It a clear liquid that works well to cut down on rust after washing wheels, but it’s very expensive. Currently it’s $90 for I US gallon (128 fl oz). The Atom Mac is $45 for 500ml (16.9 fl oz). So it’s considerably cheaper when you figur the Atom Mac is a concentrate and can actually make 340 oz at 5% dilution. The Hyde’s is pre diluted. Looking at your rotors it it seems to work at least as well. I’ll have to give it a try when my Hyde’s runs out. I usually only do a light mist to the rotors when wet. It looks like you coat the rotors heavily with it. Is that what it calls for? What dilution do you use it at?
Great work, Joe.👍I cleaned the arches on my daily early autumn, then sprayed Bilt Hamber Dynax UC into the arches and along the sills to give them some protection throughout the winter.👍
Listening to Joe talk is the most incredible thing, I feel like I've learned a life time of new phrases and knowledge just from these videos, easily the most informative and entertaining car detailing channel out there.
As a 'Guru', it would be great to see you catch as much of those chemicals before they go down the drain and into the environment. A start from someone would be great. The future nature will love you.
Once its all clean, does the rubbers, bushings & boots etc need any lubication, like silicone spary or ATP-205, or this cleaning doesn't hurt the rubbers?
Great job. But in my opinion there's no sense in cleaning the wheelhouse without taking out the plastic cover. The really dirty parts are covered behind them and cause rust.
i do love how everyone has been brain washed into thinking you can actually "waste" water, Water is indestructible, it may change form but will always turn back into water, any water that is used in any way shape or form also re-enters the water cycle so how can something that you cannot destroy and always enters back into an infinite cycle be wasted...
Yeh I’ve replied with pretty much this before. I think what they mean is clean, treated water but still, plenty of pure stuff falls from the sky on an almost daily basis here.
I liked that repair you performed on the rim "rash". I "bumped" in to the curb and did similar damage to my wife's fairly new car and she's pretty angry with me. I'll try that and see if she calms down :)
I've been pondering how to clean the wheel arches and suspension on my 02 z06 since last year. I made this too complicated by lifting the whole car off the ground. I finally figured out how when you did one wheel at a time. LOL Best of luck and GB!
Waste of water? If I recall after living there for nearly four years I don't think that a water shortage is coming anytime soon. Still good to conserve as much as feasible though. Looks great. I would think that you get top money for your cars once you decide to sell. I loved your 370z.
Unfortunately i ended up in an overspray removal loop. Diligently re-cleaning the wheel arches to remove overspray from the car clean before then cleaning the car to remove the overspray from the wheel arch clean. This loop went on for 4 exhausting days before the water company cut off my supply.
I think the wheel scuff repair came up great! I guess you could mask it off and give it a couple of coats of clear & polish to blend if you were worried about it oxidizing - but it's such a small area probably not worth it.
when your not into your Detailing most will think of this as overkill . better to tell those people it's to stop rot happening . somewhere you won't always see but it's knowing the it's done , clean and dressed that gives the owner a lift .
Great job 👏👏. But that car needs treating with Lanoguard. You can see in places on the rear arches that corrosion is beginning to set in. It is a Honda after all.
Well done Joe...👍 another great video... What you could fit on your coilovers are some suspension socks they certainly do keep the coilovers a lot cleaner..👍😎
Nice job on the CRZ's arches. Are you planning on applying a ceramic coating to the paint in the good weather, or will you be going with something else?
Love your videos. Youre teaching me a whole lot. But, I may not have seen it in the video, but please use a jack stand. It's worth your life and limbs.
Car guru. Quick q. Given you squirt about a thousand times a day (see Big Train bathroom sketch), what is your favourite go-to trigger sprayer and bottle?
That was the original plan but it was going to be a nightmare with ten year old brittle plastic clips and rusty old screws so didn’t bother plus half of the fronts were exposed anyway 🤷♂️.
Pity we have a lot of minus in the winter so can't wash the shit off. But thats fine as there is literally no road salt used when below -3 and the shitsaltmudice doesn't melt and rust your car totally.
4:49 - no complaints from me as Thames water left a 4ft fountain to flow for 3 solid days across the road from me. No, it wasn't a cracked pipe caused by ice, THEY caused it when doing some work and just went home at 2pm the first day it happened. God knows how much water was wasted unnecessarily then.
![[TH] RNT vs SPG - VCT Ascension Pacific - Day 1](http://i.ytimg.com/vi/RUTkf8Detj8/mqdefault.jpg)
This guy needs to do audiobooks; there is so much personality in his voice.
Robot personality 🙈
@Car Cleaning Guru no way. Not a robot personality. Your narration isnt just typical explanation in other channels detailing videos, but yours is a journey and story we are being told. Its descriptive, it teaches, and its informative, not full of garbage. Always look forward to your vids.
I could fall asleep to his voice, not to sound weird or anything 🤣🤣🤣
I was shocked when i finally saw his face for the first time
@@Uglier.
I agree
The voice and face just don't match in my mind.
I’d recommend getting behind the arch liner. I’ve seen soil and green shoots hiding in them.
My man there are very few things on TH-cam as satisfying as your wheel arch cleaning videos. Thanks for the drop
Great job. I usually do this every time i change from summer to winter tires or vice versa. I use silicone spray as a sort of dressing and water dispersant on the plastic and rubber parts, instead of the water based dressing, as i think it lasts a bit longer and can actually help with keeping suspension bushings soft and flexible. Further more I use some aerosol cavity wax where i can fit the nozzle in and usually give my rusty metal components a very quick lick of spray paint.
I found that cleaning arches is more important than just making them look nice but for keeping suspension components working well. I had coilovers that squeeked and found that cleaning all the crap out of them helped a lot
i do this at least once a year after winter, but i also remove the inner liner to remove dirt and other grime as that is what would cause rust etc.
Thanks Joe, just a UK diy driveway detailer of my own family fleet, I have been very pleased with 🚗 Gods range, for all round value at my local Tetrosyl car parts shop, in terms of 💷vfm and the off the shelf bigger volumes of their potions. I wish more shops not just online sold 5ltrs as well because fortnightly 🚐🚙🚗 family fleet clean day requires semi bulk useage, but not needing to go OTT buying 25ltr size product.
Their red diesel looking pre wash and purple bleeding Iron fall out I rate highly too.
I cannot praise Bilt Hamber snow foam enough for leaving such a nice gloss on the paintwork👌and BH’s protection products to motor underside and bay area metals also is top notch as you so elequently spoke about. All the best for this years content CG.
I absolutely love wheel arch cleaning!, should be more of it on TH-cam ❤
Hey Joe, really enjoyed that. I have the same Tein coilovers as you on my CRZ. I plan to do this in spring and remove the liner to treat any rust hiding behind them and a bit of underseal. Be sure to watch out for that video. Lots more crz content to come
Thank you for taking the time to make this enjoyable and informative video. You definitely motivated me to get out and do some winter cleaning!
Great video! Love the voice! Have I mentioned before now that you should consider voice acting. Your voice is easy on the ears. Water wasting is only mentioned by those around the globe living in aired climates. Here in Canada we have lots of water, but also use lots of road salts that rush out our vehicles. Use all the water you need to get all those road contaminants off of your car!
Nice job on both the wheel and the arch, did a qiuck job on mine last week with the wheels on just using an underbody lance, couldn't believe the amount of crud that came out
good job, I do the same thing up here in Canada during the spring to remove built up dirt/salt and other junk to help prevent rust.
Looks great. I do the same in Spring after snow is done and sand is cleaned off the roads. Interesting to learn about Atom Mac. We only recently have we been able to get BH in the US. The problem with rusted rotors has only had one solution for us and that’s Hyde’s Serum Rust Stopper. It a clear liquid that works well to cut down on rust after washing wheels, but it’s very expensive. Currently it’s $90 for I US gallon (128 fl oz). The Atom Mac is $45 for 500ml (16.9 fl oz). So it’s considerably cheaper when you figur the Atom Mac is a concentrate and can actually make 340 oz at 5% dilution. The Hyde’s is pre diluted. Looking at your rotors it it seems to work at least as well. I’ll have to give it a try when my Hyde’s runs out. I usually only do a light mist to the rotors when wet. It looks like you coat the rotors heavily with it. Is that what it calls for? What dilution do you use it at?
Nice little monday evening treat 👌
Looking forward to next month's viewings 🤙
Great work and nice video, your car definitely stands out from the crowd.
Great video and commentary. Pragmatic and informative. Thank you for sharing. Lovely job on the scuff.
Wheel arch cleaning videos are the best 👌 more please!!
Fastest trigger finger in the west!! Greetings from Florida
Mate, I live in Devon, it’s been raining since September so your all good re water use 👍😂
Top job fella , considering buying one of those kranzel washers for car and general use. Stay lucky!
Great work, Joe.👍I cleaned the arches on my daily early autumn, then sprayed Bilt Hamber Dynax UC into the arches and along the sills to give them some protection throughout the winter.👍
Listening to Joe talk is the most incredible thing, I feel like I've learned a life time of new phrases and knowledge just from these videos, easily the most informative and entertaining car detailing channel out there.
Man I miss my CRZ. Such a fun little car!
whao! really impress on the diy wheel fix! such a pleasure to listen and watch your videos!
Joe, came out great! Just did the same process on my red FA5 Si !
im glad we dont have to do any of that here in Texas! my 1988 Yugo and 1989 Nissan look brand new underside!!
As a 'Guru', it would be great to see you catch as much of those chemicals before they go down the drain and into the environment. A start from someone would be great. The future nature will love you.
Nature loves me already as my ecological footprint is way, way lower than most people’s despite me washing cars in a rainy county!
Once its all clean, does the rubbers, bushings & boots etc need any lubication, like silicone spary or ATP-205, or this cleaning doesn't hurt the rubbers?
U r a true legend man! Keep it up!
Great job. But in my opinion there's no sense in cleaning the wheelhouse without taking out the plastic cover. The really dirty parts are covered behind them and cause rust.
i do love how everyone has been brain washed into thinking you can actually "waste" water, Water is indestructible, it may change form but will always turn back into water, any water that is used in any way shape or form also re-enters the water cycle so how can something that you cannot destroy and always enters back into an infinite cycle be wasted...
While yes i agree to a very large extent, you still need to expend energy to clean the majority of the water before it is released in any other form
@@Zoranurai13 nah. Depends what you do with it. When the water evaporates it cleans itself in effect.
Yeh I’ve replied with pretty much this before. I think what they mean is clean, treated water but still, plenty of pure stuff falls from the sky on an almost daily basis here.
@@CarCleaningGuru you’re also surrounded by quite a bit of it.
Verbal and cleaning skills legend.
I liked that repair you performed on the rim "rash". I "bumped" in to the curb and did similar damage to my wife's fairly new car and she's pretty angry with me. I'll try that and see if she calms down :)
Excellent job Joe! This is what I’m planning to do on my 16 years old Mercedes 🤩
Now that’s putting love into your car, Great Job!!
Can I take this video for my English classes? perfect pronunciation and entonation 🤣🤣🤣
The wheels on your daily are 🔥👍. They remind me of Ferrari wheels.
Yeh they’re supposed to be 458 spider reps, just quite a bit smaller!
Always great to see these vids with a very nice voice! I really like, and keep it up!
Best episode of The Archers ever….
Nice to see more crz content 👌👌
I've been pondering how to clean the wheel arches and suspension on my 02 z06 since last year. I made this too complicated by lifting the whole car off the ground. I finally figured out how when you did one wheel at a time. LOL Best of luck and GB!
Waste of water? If I recall after living there for nearly four years I don't think that a water shortage is coming anytime soon. Still good to conserve as much as feasible though. Looks great. I would think that you get top money for your cars once you decide to sell. I loved your 370z.
I believe joe that with your voice; you could voice even the Bible in audio 😉.
Unfortunately i ended up in an overspray removal loop. Diligently re-cleaning the wheel arches to remove overspray from the car clean before then cleaning the car to remove the overspray from the wheel arch clean. This loop went on for 4 exhausting days before the water company cut off my supply.
We’ve all been there!
Nice job, Joe!
I think the wheel scuff repair came up great! I guess you could mask it off and give it a couple of coats of clear & polish to blend if you were worried about it oxidizing - but it's such a small area probably not worth it.
Love the attention to detail!
🤣🤣🤣☠️🤡🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️
Class, we have enough rain in the uk so I like the water usage
Rain just stopped here in CA time to clean my car🤣
Great job as always, does the dressing not attract all the road grime and cling onto it?
when your not into your Detailing most will think of this as overkill . better to tell those people it's to stop rot happening . somewhere you won't always see but it's knowing the it's done , clean and dressed that gives the owner a lift .
You’re wrong, I’d happily watch all four wheels being cleaned.
This
Did you gather a decent audience, when you vacuumed those back wheel arches?
Great job 👏👏.
But that car needs treating with Lanoguard.
You can see in places on the rear arches that corrosion is beginning to set in.
It is a Honda after all.
Well done Joe...👍 another great video... What you could fit on your coilovers are some suspension socks they certainly do keep the coilovers a lot cleaner..👍😎
Wish I had a car I cared this much about
Nice job on the CRZ's arches. Are you planning on applying a ceramic coating to the paint in the good weather, or will you be going with something else?
Do you get an answer ?
Legend. Great video as usual
🤯Nice job! Those wheels look brand new!
I must say that you should investigate / pursue stage work or voice over employment with your guru gig. Perfect vids from original 1st.
PLEASE upload a full detail video 😁👌
Have you ever removed the screws to get that plastic cladding off and clean underneath? I think rust likes to start under there.
I’d love to see an ‘Guru at Pebble Beach’ vid! 😂
thank you bro, amazing videos
Ever thought of fitting alloy gators to the rims, protects against scuffs.Tony D.
I've given up this year
I used to do this as a job, to wheel wells of aircraft when I was younger.
I love you videos ! Can u please tell me what brush was the purple one you used on the engine bay ? It looks super sweet 💜
Great stuff has always. Cheers from Detroit.
Care to treat your CRZ to Bilt Hamber rust-proofing products? would make a great video to watch!
Love your videos. Youre teaching me a whole lot. But, I may not have seen it in the video, but please use a jack stand. It's worth your life and limbs.
Nice car! Never sell it, just keep it.
Car guru. Quick q.
Given you squirt about a thousand times a day (see Big Train bathroom sketch), what is your favourite go-to trigger sprayer and bottle?
Really got to do my 2015 Honda civic touring because it’s filthy with winter grime and it black so looks terrible 😢
I always think that some of that elbow grease should be moved to power tools. at least inside the wheel arch area where it doesn't cause problems.
Nice vid guru
Great job, I think you should have taken the wheel arch liners off to clean behind them
That was the original plan but it was going to be a nightmare with ten year old brittle plastic clips and rusty old screws so didn’t bother plus half of the fronts were exposed anyway 🤷♂️.
I dont understand why the rears are always more dirty! Front is much cleaner!
Nice job. Now you forced me to clean the ones on my car... 🙂
Hi mate great video as always, I'm looking for something to protect some new matte wheels before I fit them to the car ,any ideas please
Thames Water has issued a hose pipe warning just based on this video alone.
Cant whait to do it to my car ones the sunshine come out!
Excellent. Will you be attending Waxstock this year?
Any one have advice on treating/repairing the clear coat that's started to disappear on my bonnet?
Pity we have a lot of minus in the winter so can't wash the shit off. But thats fine as there is literally no road salt used when below -3 and the shitsaltmudice doesn't melt and rust your car totally.
Neil Buchanan does car detailing😁
Do you recommend washing in cold or warm water?
Where are you based and how do I book? Thanks.
Great work
Love the videos
great video
big thanks!!
Love you
great video, awesome car !
Here they pay attention to the car under the wheels more than I do on the outside.
Smashing!
Where can we book in with yourself?
Great job 👍
4:49 - no complaints from me as Thames water left a 4ft fountain to flow for 3 solid days across the road from me.
No, it wasn't a cracked pipe caused by ice, THEY caused it when doing some work and just went home at 2pm the first day it happened. God knows how much water was wasted unnecessarily then.
Great
Enjoyed that