Curious to see how they fair for everyday driving on michigan roads. Been eyeing a set of SX coilovers for my 335d. Great content as always man, looks great!
great video, did my coilovers last summer, had some difficulties because my standart suspension wouldn´t come out without hitting my front fenders, looks a lot easier in your video greatings from Germany
Thanks! Sometimes you have to loosen some of the other bolts on the lower control arm so it will go down lower and the strut will clear the fender easier
Hey bro I just got a 335I about 3 months ago Love your channel I'm just getting started was kinda suspect about your rims but then saw this video today love them good job the car looks great keep up the good work look forward to your next video 👏👏
So recently bought into a 06 330xi and stumbled across your page and tbh this is the best content I could ask for, for everything DIY related to mods. Makes me fall in love with this model more and more thanks for the content and keeping up on it after so many year man !😁
Bro! When you put your new wheels on I did comment about them being 'kinda' boring. I retract that comment. Slammed with a beautiful fitment now???? Dope! Stay safe bud!
Looks good, you need an electric impact in your life haha. You don’t even need to touch the Allen on the shocks if you have an impact the shaft won’t spin
Great vid, you’ll like them I don’t have the extreme low, but I love mine, have mine adjusted so the car sits low, but still have the OEM quality no bouncing around, once I finish up with upgrading the sway bars, bump stops and bushings, then I’ll adjust the dampening to compliment the other parts. Can’t wait to hear you take on the BC’s
i have this exact same car with x drive system aswell. i got the bc extreme lows but when i maxed out the coils to the lowest setting my front axles didn’t like it and would have def broke if i hit a bad pot hole. any recommendations? it’s impossible to go super low with x drive 😭
Did you have Bilstein B8 dampers installed before the coilover install ?! I’m asking since B8 are known as very good performance dampers - so I’m asking myself if the coilover actually is a better ride?...or just a lower one ?!
the difference is that coilovers are fully adjustable. You can adjust the height, spring preload, camber and dampening. with the Bilstein shocks and struts you can't adjust anything. The dampening adjustment alone on the coilovers is a game changer. You can have them stiff for track or spirited driving, and in minutes adjust them to a soft setting for your ride home.
Justin Buice I understand B8 aren’t height adjustable, coil overs are. But, spring preload cannot be adjusted on coil overs, only the spring height and herewith the static load on each tire. I just wanted to know if the damping of the coilover is actually better than B8 !...assuming the coilover has been set up to an equal damping force as the B8
Justin Buice I would like to know too Justin because I use to have the B8’s on my 335i. How do these coil overs compare in comfort when they are set to the most comfortable setting?
I live in Slovakia, and the government basically doesn't allow any mods. If you add anything, that the original car that came from the factory didn't have (change wheels, turbos, etc.), you'll get into trouble... LOVE YOUR VIDS
That's too bad. Where I live, they don't do any vehicle inspections of any kind. Not even emissions. The only thing police will pull you over for is illegal window tint. Other than that, they don't care :)
Great vid. Maybe it’s just the way the video was shot but when your friend was trying to loosen the rear upper nut he was tightening it, turning it to the right. 😐
Need to do this to my e92. I have the original ones and it’s time for a change. How long was the total time and I’m glad you had a friend to assist you. Sick ride bro! Last night I did a total coolant flushed. Haven’t seen you done one. Highly recommend it - only took me two hours.
12:12 That "I'm helping" face XD, cool wheels tho, at first i thought what the f is he doing, but whenever i see them I start liking them more and more
I have a question of this coilover. What is the leftest parts which looks like gold rings next to spring, when you introduce the parts at 1:06? Even you seems like didn’t use it.
Do you need to upgrade anything else when putting coils on these cars such as control arms or bushings or anything of the sort? I have an x-drive model not sure if that matters
What are those other aluminum cups with the rubber gaskets on them? I got a kit for me xdrive e90 and idk what those other 1inch metal spacers are for?
Seems like more hassle & money than it’s worth. I have a m sport e90 & the gap is already minimal enough. Would it not be easier to buy one inch size bigger wheels (with the correct fitment of course)?
Justin! Those two golden rings that have their own boots that are shown at the very beginning of the video, starting @ 00:58 seconds in the extreme lower left. Do you know of any use for those? I see they fit onto the rear springs instead of the rubber boots that you can see are placed on your rear springs at that same second mark. Are those just to make the spring even stiffer? I can't find any info on those and @ 13:51 yours don't have them on there so I'm assuming you just left them laying around somewhere?
Justin Buice They claim on their website, 12 hp and 16 torque and for me, the car does feel way more peppy, like it pulls slightly more and the sound it makes is just so good. would definetly recommend!
Did you have to change the front links ??? Because I got bc on my car my oem link are to tail I had to get adjustable one to go low. Cause the OEM was stopping me from going low
I have question iv just installed bc racing a week ago amd i have a loud thus noise coming from the front passenger side every time i go over a small pot hole or bump at a certain speed amd above any ideas
Hi, I have a quick question please can you tell me if it's okay to buy the E46 Android to install on a BMW3 316ti compact. If can't please recommend an alternative. Thanks
Were the set of coilovers for the rwd and they fit for your awd or did you find an awd specific coilover set? I cant find an awd bc racing coilover set fory 335i xdrive and the regular 335i says it wouldn't fit the awd models.
Gustavo Castillo this was shot in 1080 on the EOS R and upscaled to 2K. It’s a neat trick because when you upload in 2k or 4k, youtube processes it at a much higher bitrate so the video appears to be higher resolution
@@justinbuice Ohh, okay, makes sense! I was kinda confused at first when the option for 1440p was available, since I recall in a video you stated anything shot above 1080p takes longer to process lol
J Costa it’s stiffer than before but I have the dampening on the stiffest setting. I think you could potentially make these softer and more comfortable than the Bilsteins since these are adjustable
Hi there! First off I would like to thank you for all the great videos you make I’m a huge fan! I also got almost the same car as yours except it’s an LCI 2011 328i xDrive and it’s Alpine Weiss. I’m in the dilemma of upgrading my OEM suspension to stiffen up my ride and closing my fender gap as well since I’m running 18x9 ET 31 Apex EC-7 wheels in the summer. I can’t wait to see your review on your BC coil overs so I can sort things out about going with coil overs or your old setup (Bilstein B8s with lowering springs). The dilemma here is that We have harsh salty winters here and I want my car to stay my daily all year 😉
The stock ones are torqued to 25 lb ft. I assumed that the BC's are torqued to the same spec. Unfortunately There were very little instructions with this kit.
It's hard to say because both the spring perch and the shock have a height adjustable collar. I'm not sure if just replacing the spring would make them lower
This makes me want to spend more money on my e92 335xi and not sell it 😭 close to 92k miles now idk what to do. Sell and get a new bmw or go to a different platform.
I have an '11 e90 335xi and it just hit 100k, but I'm the 2nd owner and have already been doing upgrades to prevent 100k problems. I don't want another BMW yet. I bought the regular BR BC Coilovers because my current front coilovers were leaking. New injectors, tires, rotors with brakes and new coilovers with an alignment. That's this months work.
The new wheels are insane 🔥😍
Slexzh thank you!!
What wheels are those?
Curious to see how they fair for everyday driving on michigan roads. Been eyeing a set of SX coilovers for my 335d. Great content as always man, looks great!
Thanks! I'll do a review in a few weeks
Love the how-to videos, Justin. Great result, too!
Thanks!
Will you ever do an LCI conversion of the headlights, hood, and taillights? Great stuff Justin... stay safe!
Thanks! Maybe one day
great video, did my coilovers last summer, had some difficulties because my standart suspension wouldn´t come out without hitting my front fenders, looks a lot easier in your video
greatings from Germany
Thanks! Sometimes you have to loosen some of the other bolts on the lower control arm so it will go down lower and the strut will clear the fender easier
You already know my feelings on this. 🙃
illestprincess LOL
😂
Hey bro I just got a 335I about 3 months ago Love your channel I'm just getting started was kinda suspect about your rims but then saw this video today love them good job the car looks great keep up the good work look forward to your next video 👏👏
Thanks! Yeah they look a lot better with the car lowered.
So recently bought into a 06 330xi and stumbled across your page and tbh this is the best content I could ask for, for everything DIY related to mods. Makes me fall in love with this model more and more thanks for the content and keeping up on it after so many year man !😁
Patrick Flores I appreciate that! Glad you are enjoying the videos and the car 😎
Adjustable coil-overs , love everything about it ! Weight reduction too
Rookie To Pro they are probably one of the most bang for buck mods you can do to any car 😎
Bro! When you put your new wheels on I did comment about them being 'kinda' boring. I retract that comment. Slammed with a beautiful fitment now???? Dope! Stay safe bud!
Thanks! I had a feeling people wouldn't understand until they saw it lowered ;)
By far best installation video I found
Looks good, you need an electric impact in your life haha. You don’t even need to touch the Allen on the shocks if you have an impact the shaft won’t spin
It's on my shopping list lol
Great vid, you’ll like them I don’t have the extreme low, but I love mine, have mine adjusted so the car sits low, but still have the OEM quality no bouncing around, once I finish up with upgrading the sway bars, bump stops and bushings, then I’ll adjust the dampening to compliment the other parts. Can’t wait to hear you take on the BC’s
i have this exact same car with x drive system aswell. i got the bc extreme lows but when i maxed out the coils to the lowest setting my front axles didn’t like it and would have def broke if i hit a bad pot hole. any recommendations? it’s impossible to go super low with x drive 😭
Did you have Bilstein B8 dampers installed before the coilover install ?!
I’m asking since B8 are known as very good performance dampers - so I’m asking myself if the coilover actually is a better ride?...or just a lower one ?!
the difference is that coilovers are fully adjustable. You can adjust the height, spring preload, camber and dampening. with the Bilstein shocks and struts you can't adjust anything. The dampening adjustment alone on the coilovers is a game changer. You can have them stiff for track or spirited driving, and in minutes adjust them to a soft setting for your ride home.
Justin Buice
I understand B8 aren’t height adjustable, coil overs are.
But, spring preload cannot be adjusted on coil overs, only the spring height and herewith the static load on each tire.
I just wanted to know if the damping of the coilover is actually better than B8 !...assuming the coilover has been set up to an equal damping force as the B8
@@vollcare4076 BCs have adjustable spring preload. Look them up lol
Justin Buice I would like to know too Justin because I use to have the B8’s on my 335i. How do these coil overs compare in comfort when they are set to the most comfortable setting?
damn you brought the chrome back too, the vision is starting to come together.
A V 🙏🏻
I live in Slovakia, and the government basically doesn't allow any mods. If you add anything, that the original car that came from the factory didn't have (change wheels, turbos, etc.), you'll get into trouble... LOVE YOUR VIDS
That's too bad. Where I live, they don't do any vehicle inspections of any kind. Not even emissions. The only thing police will pull you over for is illegal window tint. Other than that, they don't care :)
"Quarantine garage" lol good one! Informative video!
Bilal Ehsan thanks! 😁
This is the content I’ve been waiting for man. Great video, well shot
Jonathan Ylagan thanks! More to come 😎
THANK YOU this couldn't have been better timing I am just about to order coilovers for my 335xi 🙏🙏🙏 car looking nasty as always!
Nice! good luck with the install
@@justinbuice thanks man I'm gonna need it 😂
Great vid. Maybe it’s just the way the video was shot but when your friend was trying to loosen the rear upper nut he was tightening it, turning it to the right. 😐
I think you should invest in some FL taillights. They will really change the look of the car.
Need to do this to my e92. I have the original ones and it’s time for a change. How long was the total time and I’m glad you had a friend to assist you. Sick ride bro! Last night I did a total coolant flushed. Haven’t seen you done one. Highly recommend it - only took me two hours.
these coilovers fit both the e90 and e92?
I'm getting my bmw 320i soon and all I want is to make it unique
Have you ever made a video on how to raise / lower the rear? As it is a separate coil and shock setup
just so you know, you stripped the allen on the rear strut because its a 6mm and you guys used a 5mm. Other than that great job!!
Lmao I said the same thing😅
glad i found this... might actually try it myself now rather than take it to a shop
Those wheels and the fitment😩 clean ass e90
Alan Santillan 🙏🏻
you can get the 13mm nut off with an open end wrench, this way you dont even have to take off the strut brace
Good job jb but quick question what goes at the bottom of the spring on the rear
Ben Troy There’s a rubber pad that the spring sits on that’s included in the kit.
@@justinbuice so that goes on the bottom of the spring when being installed? Or is that optional
12:12 That "I'm helping" face XD, cool wheels tho, at first i thought what the f is he doing, but whenever i see them I start liking them more and more
Like I always say, such clean work.
Posted Broadcast I appreciate that 🙏🏻
I have a question of this coilover. What is the leftest parts which looks like gold rings next to spring, when you introduce the parts at 1:06? Even you seems like didn’t use it.
definitely not my cup of tea but I must say it came out a lot better than I was expecting, good shit as always.
I appreciate it :)
Life hack 13:54 if the back still too high do not put this you loose adjustability but you go low low
Ah this is no life hack..its just bad advice
You have hole in the middle covered with plastic cover to remove middle not.. you don't have to remove the whole filter assembly
Good to know for next time
Car looks sick! Just wondering, what spring rates did you get for them?
Oh snap, I'm putting some st coils on my m3 this week too 😁 looks mega dope brotha good work!
Love the stance justin 🚘😍 and those wheels 🔥
That Beamer Guy thank you!
good video but id like to take a second to all watch at 11:30 when your boy turned it the wrong way and stripped it lol
Did you reuse the oem sway bar end links? Or did you swap them out with the bc racing ones ?
Do you need to upgrade anything else when putting coils on these cars such as control arms or bushings or anything of the sort? I have an x-drive model not sure if that matters
What are those other aluminum cups with the rubber gaskets on them? I got a kit for me xdrive e90 and idk what those other 1inch metal spacers are for?
What kinda spacers u got? And where u get them from?
would you say these are more worth it than the lowering springs and shocks and struts ?
Seems like more hassle & money than it’s worth. I have a m sport e90 & the gap is already minimal enough. Would it not be easier to buy one inch size bigger wheels (with the correct fitment of course)?
to adjust rear, which way to you spin the lock collar to loosen? Same as front or opposite direction.
Great Video Justin, sorry about you back.
The netx video show where do you put the water 💧 in the car please
Justin! Those two golden rings that have their own boots that are shown at the very beginning of the video, starting @ 00:58 seconds in the extreme lower left. Do you know of any use for those? I see they fit onto the rear springs instead of the rubber boots that you can see are placed on your rear springs at that same second mark. Are those just to make the spring even stiffer? I can't find any info on those and @ 13:51 yours don't have them on there so I'm assuming you just left them laying around somewhere?
you should get an afe intake. have one on my 325, and i love it!
Did you notice any performance gain?
Justin Buice They claim on their website, 12 hp and 16 torque and for me, the car does feel way more peppy, like it pulls slightly more and the sound it makes is just so good. would definetly recommend!
Where is the custom spring rate option?
Clean!!! 💦 liking these wheels the more I watch
Thanks! They are definitely an acquired taste lol
Gotta do a engine cleaning video next 👀
I really need to. That's the original dirt from 2006 in there lol
@Justin Buice What did you have on there before? A cup kit? Looks like the B8 or B12?
Do you have the link for the spacers and the longer lug nuts you got for your Bimmer?
Great video Justin 👍👍👍
Thank you.
Did you have to change the front links ??? Because I got bc on my car my oem link are to tail I had to get adjustable one to go low. Cause the OEM was stopping me from going low
Dang bro I didn't know you had such problems with the old suspension haha. I'm glad I don't live in Michigan with all of that rust 😅
Is the review video coming anytime soon? Looking to install them on my e90 also!
I have question iv just installed bc racing a week ago amd i have a loud thus noise coming from the front passenger side every time i go over a small pot hole or bump at a certain speed amd above any ideas
Keep your b8 and send them out to fatcat motorsports for revalve. It's expensive. Look them up.
So clean bro!
Thank you!
When you adjust the rear do you have to reset preload again or can i adjust the height like a few mm or so without having to do all that?
What spring rates you went with? Thanks loads
Just curious if u sold the Bilstein struts already?
Where did your window trim chrome delete go?
Hi, I have a quick question please can you tell me if it's okay to buy the E46 Android to install on a BMW3 316ti compact. If can't please recommend an alternative. Thanks
Were the set of coilovers for the rwd and they fit for your awd or did you find an awd specific coilover set? I cant find an awd bc racing coilover set fory 335i xdrive and the regular 335i says it wouldn't fit the awd models.
Oh crap he did it 🤣. Might have to copy you on my e90 now lol. Looks good as always bro👍🏼
Thanks man!
What spring rate do you have? Nice e90! 😉😉
Did you install your stabilizer link into the coilovers
I always admire your editing skills and videography 🖤 And 1440p on my phone! Was this shot on 4k with the EOS R?
Gustavo Castillo this was shot in 1080 on the EOS R and upscaled to 2K. It’s a neat trick because when you upload in 2k or 4k, youtube processes it at a much higher bitrate so the video appears to be higher resolution
@@justinbuice Ohh, okay, makes sense! I was kinda confused at first when the option for 1440p was available, since I recall in a video you stated anything shot above 1080p takes longer to process lol
@@gustavocastillo9954 it takes a little longer. 1080 processes in like 60 seconds. 4k is like 10 minutes (on top of the uploading time)
I do love the Your content it’s awesome
I wanna go lower than this, so what coilovers can go lower?
looks a lot better!
I agree
u need side skirts, lci hood, and lci front double slotted grills😄
would this work with front and rear spacers?
almost dialed in... spacers, alil more camber in the back... she'll be sittin pretty
about to go play with the rear camber right now
@Justin Buice how is the ride quality? More comfortable than the Bilsteins or about the same?
J Costa it’s stiffer than before but I have the dampening on the stiffest setting. I think you could potentially make these softer and more comfortable than the Bilsteins since these are adjustable
How do you adjust the rear height?
Hi there! First off I would like to thank you for all the great videos you make I’m a huge fan! I also got almost the same car as yours except it’s an LCI 2011 328i xDrive and it’s Alpine Weiss. I’m in the dilemma of upgrading my OEM suspension to stiffen up my ride and closing my fender gap as well since I’m running 18x9 ET 31 Apex EC-7 wheels in the summer. I can’t wait to see your review on your BC coil overs so I can sort things out about going with coil overs or your old setup (Bilstein B8s with lowering springs). The dilemma here is that We have harsh salty winters here and I want my car to stay my daily all year 😉
Those patrick star 5's are killin me xD
Im going to paint Patrick on there lol
Justin give us 360 view on the car out side the garage
Family First the beginning of the video shows the fitment better
Where can I get that beat in the beginning of the vid?🔥
What are the tightening torque spec for the 3 bolts on top of the struttower?
The stock ones are torqued to 25 lb ft. I assumed that the BC's are torqued to the same spec. Unfortunately There were very little instructions with this kit.
I have the regular bc’s but they’re are max low in the rear, if I got the swift spring upgrade for the super lows, would that make me go lower?
It's hard to say because both the spring perch and the shock have a height adjustable collar. I'm not sure if just replacing the spring would make them lower
You thinking about selling your old bilstein/h&r set up?
Andrew Smith I have a buyer for them as of now
Men love your videos, and your BMW its look clean! Hope to get one again :D
Peace V
My 09 335i was slammed on coilovers and it made parking that hoe a nightmare. Nearly ripped the front end off my car 4 times.
Nick sure did sort out ur rear ha tell him not to hard next time he hurt ur back
How long does it take to be shipped to your door?
Mine took two weeks, but the wait might be longer now due to the virus.
Justin Buice alright thanks, video really help me choose because I have 328xi & front wheel gap was driving me crazy 🤦🏽♂️
I need help I’m trying to buy a bmw but which one? That will last with me and not breaking every time
Anything with the N52 engine is a safe bet
Justin Buice thank you I actually watch you everyday now. I love ur content!!!
Thank you for all your VIDEOS ✌😎👍🔧🚘 E90 life🚥
Fiyaaa🔥
Thanks! :)
It will hit humps. So difficult in carparks etc
That's why I got height adjustable ones.
This makes me want to spend more money on my e92 335xi and not sell it 😭 close to 92k miles now idk what to do. Sell and get a new bmw or go to a different platform.
I have an '11 e90 335xi and it just hit 100k, but I'm the 2nd owner and have already been doing upgrades to prevent 100k problems. I don't want another BMW yet. I bought the regular BR BC Coilovers because my current front coilovers were leaking. New injectors, tires, rotors with brakes and new coilovers with an alignment. That's this months work.
Thanks Buice🫡
what wheels are those
these will work on a 11 e92 328xi right?
yes