How to Splice Rebar
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- http//www.learningconstruction.com
learn how to splice rebar or reinforcing steel by following the formula shown on your drawings. this call outs or details will typically show on your general notes, or in some cases they will be shown on a separate schedule on your sheets. this formula will be shown as following
rebar splice shall be X bar diameter * Y
for example
5 rebar * 40 will be
(5/8) * 40 = 30"
don't forget to add at least 4 wire ties in the rebar, we typically place 5 ties for each splice; however, in some cases your structural drawings will also request a specific number of ties on the splice.
Never shows the rebar being spliced. ???
I totally agree.They should of included the wire ties!
I have a question because the viaduct precast bottom slab was used 34 times bar diameter? is that safe? considering HS2 live load plus live load passing through on that bridge structure?
What’s the embedment length in roof beam
Dear Sir Can You Sand Me This Book Which Through You Give Us Reference I Appreciate You
What do you think about mechanical rebar splicing? Did you have experience with that?
I ask because if the mechanical way spliced joints are full-strength joints and this way we can reduce percentage of reinforcement in columns! Need your advise. Thank you!
mechanical splices typically are 125% of strength
can we weld rebar splices of columns instead of tying ? Is it safe ?
Chairs supports,the welder should knock it with the welders hammer,are thin metallic hammer so it gets its strength
You didn’t really show us how to splice it…
i have a problem in site there is a gab between two spliced dowels of column more than 8 cm what can i do
atef gebaly abd el gayed Do you still have this problem? Email me on my website and we can chat.
use a sledge hammer and bang it over - 1 of a dozen fixes
Yes you should show how
Cost will be more
Carrying of welding machine is not suitable at some locations
Can you weld rebar instead of tying?
NO