Can you make a video of you tearing apart that Yamaha 70 two stroke with the bearing problems? Would love to see how you go about that and replace internal parts!
@@shize9ine i would hope so! 90% of these should be bored in my opinion. ive rebuilt over 20 2 stroke outboards, and all were out of round atleast 2 thousands. my motto is if you want it to last like new, bore and hone is the only way to go. i see so many guys just taking a ball hone and putting new rings in these, and they only last 1/4 of the time they could have if done properly. plus its only $55 a hole from my guy.
It would be great to see a project cost break down, Boat, Motor and parts plus 20 hours of labor for example. Thank you for the content, i really enjoy the videos! Have a great day!!
He priced out a project once, but never again as far as I can tell. I think he makes a decent profit, and also enjoys the work, so it's a win-win for him. His buddies that help probably get something in return, if only friendship, or pay for their time, or maybe use of a boat or some of the profits. Or maybe he's a cunning vampire, sucking money, and work, and boat parts out of everyone he comes into contact with. How the heck would I know? I just hope he never drops any heavy stuff on those cute bare toes.
for a full rebuild, figure around $1500 including the rebuild kit and machine work with carb kits, NOT including labor of course and anything else it might need.
Loved that sweethearts response. Oh my God... a fiiish !! And the little Pompano says whooo whooo !!! Be nice to have that fish in a time lapse/freeze frame picture.
Another great one. Keep them coming! I also like seeing the CL ads you place. Maybe show the new owners picking up the boat and the smiles on their faces?
Especially loved the bonus content of the pompano jumping over your head, in the addition to the top work on the pleasure craft, mate. Well done. Cheers!
GREAT VIDEO! just a suggestion for you when cleaning up the boats to sell. You did the transom, hull sides and cleaned the inside which brings it back to life. If I were you when you had the center console stripped before adding the stereo, GPS, etc you should have run your buffer on the console and brightened it up.
Nice work as usual. The impeller fins always take a set and are bent, but its really about how flexible they are at high speed. if they are still soft, all is fine.of course might as well replace it, since it would need a new plate gasket anyway.
Came out great! Your videos inspired me to buy a 1995 Boston Whaler Dauntless 13. It has a Yamaha Pro 50 2 stroke on it. All original boat, motor and trailer. Great condition, just needs a little clean up and basic maintenance.
i love these type of videos! i live in christmas, fl and have recently been considering fixing up and restoring boats as a side hustle. Stuff like this helps someone like me shed light on what i am getting into and if it seems like something i can do.
It flies lol ..thats a perfect Pinellas boat...nice work...love the cross bayou canal part, the big Snapper are in the deep cuts where the current rounds the corners, see ya out there someday!
Sweet skiff. I recently purchased a 14.6ft baycraft from the 90s. Cant find a lick of info on it! The VIN numbers appear to be from Bay craft boats.. it looks a lot like an IPB but more like a true flats boat like yours. It has an internal tank and definitely is an action/bay craft poling platform. I have no clue!
Excellent job. I aspire to work up to something like that. Of course, I'll have to find one that needs a lot of T.L.C., but I'm willing. Just have to see what Mississippi has to offer.
I like this boat for fishing. I hope you keep it for yourself and use it to fish since you like to fish. Love that new motor you stuck on it just the right amount of power for that boat. Keep boats and motors videos coming.
@@Grasshoppa65 definitely agree, he has tons of new tools, but all his old 70's looking tools still work like they are new, same ones I learned on in the 80's.
Excellent video and content. Keep it up! Practical purchases and do it yourself repairs adds confidence to a first time boat buyer interested in an entry level "project" boat.
Not sure if you already use it - but there is some stuff called Shur Hold Buff Magic. It’s by far the best buffing compound I have ever used. Between that and using Meguiars Professional degreaser to scrub vinyl or interior - it removes ALL the black moldy spots and discoloration- they are two boat detailed secrets you’ll be thankful you know.
If ever you decide to sell any of those reconditioned boats, I am definitely interested. You do an absolutely amazing job. I am looking for a walk around boat for use in the bays of Oregon and Maryland for some crabbing. The motor is not so important as I will be putting a newer 4 stroke in it myself. Just interested in the boat itself and the trailer.
Next time you bring home a new boat, could you do a video on how you inspected it, what you found, and why you ended up buying it. Thanks and keep the videos coming
Could you go over the cable connections. Can you use old cables for shifting ? Also ignition and starter wiring would be helpful. As always great video.The best out there.
3 ปีที่แล้ว +1
0:45 lucky to have a 70 4 stroke just "laying around"
Great job on the build. My only thought was that was a lot of work on a cheap skiff. Seems like there would be more money in a Hewes, Back country, AC or Maverick. I know they would cost a little more to buy.
I think you should find a old abandoned boat shop for sale around there to redo your boats and store your boats and due your videos I'm sure there are tons down there I think that would be awesome and a fun project to showcase on your TH-cam videos thanks for the videos and all your hard work can't wait till the next video🛥️💯💯💯
Keep it coming man, would love to see a bigger boat or house boat resto and a series of videos on it. Would be super sweet . Keep up the content dude love all of it
great video, i only wish i could find boats like that up this way!! I want a nice skiff for fishing the tampa area. ty for the work you put into these videos!
I use Bar Keeps Friend to wash my deck in the spring. It has Oxalic acid in it. (Active ingredient in a lot of hull washes.) I get the deck wet and shake the stuff on. Give a quick light rub with my car wash brush and let it sit. Power wash it off and a quick wax. Done.
Im assuming that you are buying, fixing, refurbishing and selling. I think it would be cool if you showed the entire process and broke down the cost vs profit of the whole process. I think your channel is awesome
Just have to say........this is the most truly appropriately named channel on youtube. "The Boat King" would also be apt. Great little fishing setup. I love this channel.
That jigsaw... I lost one just like it in 1958 when I visited relatives in Florida. I was only 8. It was my favorite Christmas present. My grandpappy gave it to me on Christmas morning. Then at dinner he keeled over dead, face down into the turkey platter. We saved most of it, the turkey that is, but a lot of the dressing was all in his beard and up his nose. I was going to use the saw to cut out little wooden toys, and donate them to needy children the world over. I hoped some corporation would see me with that cheap and dangerous-looking saw, and hear about my plan to help needy children all over the world, and feel sorry for me, and donate tens of thousands of dollars worth of professional woodworking machinery to me, and maybe build me a nice big air-conditioned shop to put all the machinery in. So you can see why that saw was special to me. I had big plans, for an eight year old. Could you check the serial number, please? I still don't have a saw like that. I was just thinking that it's never too late to help the needy children of the world. Thanks.
Just from very recent experience with cutting speaker holes in my Mako and my Carolina Skiff..instead of using the jigsaw… try using a router, cuts a very clean hole and less chance of tearing up the gelcoat around the hole.
That looks like a fun boat. How does the F70 performance compare to the 2-stroke 70? Also I’d love for you to do a how you video on waxing and polishing a boat. I suspect many of us who follow you would enjoy that content. What tools, chemicals, compounds, techniques, etc...
![Florida Sportsman Project Dreamboat [2021] - Super Custom 18 Maverick & Outboard Oil Change Basics](http://i.ytimg.com/vi/HPSC6mHBwHE/mqdefault.jpg)
That fish was so Majestic flying right over the back of the boat. 14:12
I slowed it down it looked like a cute little baby pompano 😊
@@jakef1068 Yup. I didnt know they jumped like that
It was cool af
Dude that was crazy
DUDE! I had to stop the video to comment! That was so sick!!
Can you make a video of you tearing apart that Yamaha 70 two stroke with the bearing problems? Would love to see how you go about that and replace internal parts!
I'd like to see that also.
He might just use a machine shop. Dunno if ive ever seen a bottom end rebuild on this channel.
Thirds for the Yammy rebuild video please!
@@shize9ine i would hope so! 90% of these should be bored in my opinion. ive rebuilt over 20 2 stroke outboards, and all were out of round atleast 2 thousands. my motto is if you want it to last like new, bore and hone is the only way to go. i see so many guys just taking a ball hone and putting new rings in these, and they only last 1/4 of the time they could have if done properly. plus its only $55 a hole from my guy.
@@ct1762 usually caused by not letting the 2 stroke warm to proper operating temps before banging the throttle off the firewall
Absolutely love the content! I love seeing you bring these beauties to life. Please keep them coming!
Love these content bro.
It would be great to see a project cost break down, Boat, Motor and parts plus 20 hours of labor for example.
Thank you for the content, i really enjoy the videos! Have a great day!!
I assume he sells these boats but thru what media
He priced out a project once, but never again as far as I can tell. I think he makes a decent profit, and also enjoys the work, so it's a win-win for him. His buddies that help probably get something in return, if only friendship, or pay for their time, or maybe use of a boat or some of the profits.
Or maybe he's a cunning vampire, sucking money, and work, and boat parts out of everyone he comes into contact with. How the heck would I know?
I just hope he never drops any heavy stuff on those cute bare toes.
@@rangerbull DOES HE SELL THEM>?>
@@regurgitatinggoldvideos6502 yes
for a full rebuild, figure around $1500 including the rebuild kit and machine work with carb kits, NOT including labor of course and anything else it might need.
i don't think ive ever seen a pompano jump so freaking high as that one did behind your boat lol
It looked so casual.
f
Jumped _over_ the boat!
instablaster
Bro was like " Yeah Light work for me " lol.
Loved that sweethearts response. Oh my God... a fiiish !! And the little Pompano says whooo whooo !!! Be nice to have that fish in a time lapse/freeze frame picture.
It’s nice to see someone who takes so much pride in their work and turns out a boat that anyone would love to own!! Great work my friend😎👍
Another great one. Keep them coming! I also like seeing the CL ads you place. Maybe show the new owners picking up the boat and the smiles on their faces?
I love all of your videos! Love the care and attention you give to all your boat restorations!
Great video... Talking about your decisions would help others restore their boats too! Like the helm pad etc.
Love these videos. Currently working on my ‘91 19ft dusky. Your videos help me a lot with similar repairs I’m doing. Keep it up!
Especially loved the bonus content of the pompano jumping over your head, in the addition to the top work on the pleasure craft, mate. Well done. Cheers!
Keep punching man !! 💪💪
GREAT VIDEO! just a suggestion for you when cleaning up the boats to sell. You did the transom, hull sides and cleaned the inside which brings it back to life. If I were you when you had the center console stripped before adding the stereo, GPS, etc you should have run your buffer on the console and brightened it up.
Love how you make it look so simple. Great work thanks.I'm learning a lot by watching your videos. Do you sell any of the books you repair?
Yes, I enjoy this kind of content. I really enjoy your channel so far. I’ve only been subscribed just a little bit. Tiny Houston MS ( Len Price )
Really enjoy these boat restoration videos. Keep them coming.
Man oh man. This video was awesome. Very well explained. And kuddos to the camerawoman. 🔥. Keep it up.
Nice work as usual. The impeller fins always take a set and are bent, but its really about how flexible they are at high speed. if they are still soft, all is fine.of course might as well replace it, since it would need a new plate gasket anyway.
Came out great! Your videos inspired me to buy a 1995 Boston Whaler Dauntless 13. It has a Yamaha Pro 50 2 stroke on it. All original boat, motor and trailer. Great condition, just needs a little clean up and basic maintenance.
buy whar 15 or sxoút 145 hybred rate 50
That fish jumping out of the water was like "BAZINGA!!!!"
I learned a lot from watching your video. Thanks. Kudos to your videographer - she did a terrific job.
i love these type of videos! i live in christmas, fl and have recently been considering fixing up and restoring boats as a side hustle. Stuff like this helps someone like me shed light on what i am getting into and if it seems like something i can do.
Another project well done!
I enjoy watching your stuff.
Reminds me of growing up in Pinellas Point and running around Boca Ciega Bay..... Oh the 80's!
i just wish he would give his youtube friends first stab at buying his refurbs lol
Its still for sale. You can find it for sale online.
Amen to that! Would love to buy one of his refurbished boats. I honestly don't have any mechanical skills, trying to learn some after these videos.
@@scott6235 you know smthg to e don't.🤔🤔🤔.pass the page 👍
Whats the price and location?
@@Purdysquatch $10k. St. Pete, Fl
It flies lol ..thats a perfect Pinellas boat...nice work...love the cross bayou canal part, the big Snapper are in the deep cuts where the current rounds the corners, see ya out there someday!
Hey! I have got a question, could you do a full detail impeller replacemtent video? With all the steps, and some musts and don'ts?
Sweet skiff. I recently purchased a 14.6ft baycraft from the 90s. Cant find a lick of info on it! The VIN numbers appear to be from Bay craft boats.. it looks a lot like an IPB but more like a true flats boat like yours. It has an internal tank and definitely is an action/bay craft poling platform. I have no clue!
How much would you sell this boat for
Are you wanting to buy it
Atleast $1
If you have to ask you can’t afford it
@@eldorado1244this might be the dumbest thing I’ve ever read.
@@ChaseDaPlayaI agree
Excellent job. I aspire to work up to something like that. Of course, I'll have to find one that needs a lot of T.L.C., but I'm willing. Just have to see what Mississippi has to offer.
Love the sound of the newer engine.
yeß
I like this boat for fishing. I hope you keep it for yourself and use it to fish since you like to fish. Love that new motor you stuck on it just the right amount of power for that boat. Keep boats and motors videos coming.
Where do you list the boats, that you refurbish, for sale?
More boats for sure. Respect from the UK!
The new 4-Stroke is so quite. Outstanding job.
yes new 60 hp elrric batery powrr beßt
Please do good guy ,am in Englewood Florida . Love your get to it and fix it . Cheers to you
The oldest jigsaw i have ever seen lol
I was gonna say that, it looks like my dad's old Black and Decker, still kicking after all these years.
@@randymagnum6680
They don't make em like they used to sonny.
@@Grasshoppa65 definitely agree, he has tons of new tools, but all his old 70's looking tools still work like they are new, same ones I learned on in the 80's.
I was just about to say that. Sometimes people don’t care about tools. I love spending money on tools😉😎
I came here for this comment 😁
Love your videos TBG. I have a 2002 SeaHunt with 150hp Mercury Opti 2 stroke. I am learning a lot about how to dyi. Thanks for your helpful videos.
merçy 150 jet outbard best
That was cool with the fish jumping.
Great content!!! From the boat to fishing... Hope you add more fishing with your projects...
If you have a 4stroke 225 ‘laying around’ can u let me know i have a great running 2 stroke 225 to replace.
chief has mercy 225 hp mercy jet óítbard
Cool to see you bring these boats back to life. You seem to be a good shade tree mechanic.
You didnt say the price on this one
Excellent job. You carefully fix every little thing to make the boat perfect in all aspect.
🤙🏼🤙🏼🤙🏼🤙🏼
Another great video of a very nicely done boat restoration! Thanks!
I wish you would actually go through changing the motor and the different steps
4 transom bolts, a bulkhead plug to the controls/gauges, and a steering cable. 🤷♂️
Excellent video and content. Keep it up! Practical purchases and do it yourself repairs adds confidence to a first time boat buyer interested in an entry level "project" boat.
the fish that jumped the boat was a pompano
No it wasn't...it was a flying fish.
Sweet little skiff! Nice build man. That fish liked it so much it tried to jump right in with you guys.
Notification gang WYA!!?
Not sure if you already use it - but there is some stuff called Shur Hold Buff Magic. It’s by far the best buffing compound I have ever used.
Between that and using Meguiars Professional degreaser to scrub vinyl or interior - it removes ALL the black moldy spots and discoloration- they are two boat detailed secrets you’ll be thankful you know.
Likes:232 dislikes:0 Yeah buddy edit: 2.2k to 7 now 😢 must be some land lovers :(
If ever you decide to sell any of those reconditioned boats, I am definitely interested. You do an absolutely amazing job. I am looking for a walk around boat for use in the bays of Oregon and Maryland for some crabbing. The motor is not so important as I will be putting a newer 4 stroke in it myself. Just interested in the boat itself and the trailer.
Next time you bring home a new boat, could you do a video on how you inspected it, what you found, and why you ended up buying it. Thanks and keep the videos coming
Could you go over the cable connections. Can you use old cables for shifting ? Also ignition and starter wiring would be helpful. As always great video.The best out there.
0:45 lucky to have a 70 4 stroke just "laying around"
Yep, like these kind of videos. More of this and like Brandon just wrote, love to see the rebuild of the 70 with bearing-issues. Fan from Finland.
Great job on the build. My only thought was that was a lot of work on a cheap skiff. Seems like there would be more money in a Hewes, Back country, AC or Maverick. I know they would cost a little more to buy.
I just picked up a 1973 Chrysler valiant boat. Has a 28hp speeditwin on it. And I got it for free, thanks for inspiring me!
I would 100% buy one of his refurb boats. What's really nice is he has the TH-cam video so you can see what he as done.
Love it nice job man. Ya the fish jumping while filming was awesome. I bought a Yamaha 70 hp 4 Stroke last year and love it,
What's the name of that fish flying over Your head at time 14:17/17:02 ? We don´t have tose in Finland
Love the videos man. How are you not over a million subs already?!? The fish jumping was amazing, he just wanted his piece of quick fame.
I think you should find a old abandoned boat shop for sale around there to redo your boats and store your boats and due your videos I'm sure there are tons down there I think that would be awesome and a fun project to showcase on your TH-cam videos thanks for the videos and all your hard work can't wait till the next video🛥️💯💯💯
wowwww, I like this boat, look simple but convenient and comfortable to ride, I don't like some others with too much unused craps in it. Thank you man
you need to try the TUNISIAN Cap negro prestige 3.90 boat , and the Sounine prestige 5.40 for "SINPAR MARINE" in Tunisia , north africa @TN
sure glad to see you back again. i sure injoyed these videos. looking for more of them.
Keep it coming man, would love to see a bigger boat or house boat resto and a series of videos on it. Would be super sweet . Keep up the content dude love all of it
great video, i only wish i could find boats like that up this way!! I want a nice skiff for fishing the tampa area. ty for the work you put into these videos!
th-cam.com/video/sZs73adgJSg/w-d-xo.html
Dude 1930 wants it's jigsaw back lol...I do like your videos man you do an amazing job. Keep em coming
I use Bar Keeps Friend to wash my deck in the spring. It has Oxalic acid in it. (Active ingredient in a lot of hull washes.) I get the deck wet and shake the stuff on. Give a quick light rub with my car wash brush and let it sit. Power wash it off and a quick wax. Done.
love the content the way you bring these boats to life is therapeutic brother
more info ! prise ! parts ! work time , nice keep up the nice work
REally nice motor and boat! Looks like you found lil buddy tho :) 13:30
14:15 a Juvenile Pompano just rainbowed over your boat. That must be a sign of good luck. Are you sure you're not Aquamans son? 😂
man, your videos are so motvatng. I really enjoy watching all your projects.
Nice rig. Florida must have tons of old geezers with boats in the yard just for the pickens.
That fish was checking out the new boat! lol. Great work again.
Love theses little falts boat videos
Yes please keep them coming love your videos love the boats all the way in the Carribean
That is my type of boat for fishing down in Englewood cheers John
another awesome recovery and rebuild and as always you never disappoint me
Love seeing these. Would like to see a video about soft spots in floors and repairing that though.
❤️❤️....Watching you take a 💩 of a boat and transforming it into a sea worthy vessel....Keep EM Coming...... Yyyyyyeeeeewwwww
Those little boats sell between $4500- $6500. all the time in Clear Lake/Houston,Tx.
Im assuming that you are buying, fixing, refurbishing and selling. I think it would be cool if you showed the entire process and broke down the cost vs profit of the whole process. I think your channel is awesome
I’d love to see them overhaul a big 30’ cabin cruiser. That’d be an awesome several part video!
Just have to say........this is the most truly appropriately named channel on youtube. "The Boat King" would also be apt.
Great little fishing setup.
I love this channel.
Love the vlogs you do, waiting for next one over here in England 🏴 👍🏻
Great job. I had the Yamaha 70 4 stroke on my last boat. Fantastic motor.
BEAUTIFUL BOAT, GREAT FOR FISHING‼️👍👍. Vinny 🇺🇸
That jigsaw... I lost one just like it in 1958 when I visited relatives in Florida. I was only 8. It was my favorite Christmas present. My grandpappy gave it to me on Christmas morning. Then at dinner he keeled over dead, face down into the turkey platter. We saved most of it, the turkey that is, but a lot of the dressing was all in his beard and up his nose.
I was going to use the saw to cut out little wooden toys, and donate them to needy children the world over. I hoped some corporation would see me with that cheap and dangerous-looking saw, and hear about my plan to help needy children all over the world, and feel sorry for me, and donate tens of thousands of dollars worth of professional woodworking machinery to me, and maybe build me a nice big air-conditioned shop to put all the machinery in. So you can see why that saw was special to me. I had big plans, for an eight year old.
Could you check the serial number, please? I still don't have a saw like that. I was just thinking that it's never too late to help the needy children of the world. Thanks.
Omgoodness that was a Pompano that jumped over your boat!! That was awesome!!
Keep on with the videos! Been watching for a couple months. Channel is about to blow up
Thanks for the video. Show the rebuild of the Yamaha That would be awesome.
Just from very recent experience with cutting speaker holes in my Mako and my Carolina Skiff..instead of using the jigsaw… try using a router, cuts a very clean hole and less chance of tearing up the gelcoat around the hole.
chief had oay çompay sterio radio bukt in ßkíff çaróliiña skiff çopmy did iñstall
That looks like a fun boat. How does the F70 performance compare to the 2-stroke 70? Also I’d love for you to do a how you video on waxing and polishing a boat. I suspect many of us who follow you would enjoy that content. What tools, chemicals, compounds, techniques, etc...
4 ßtorke best 60 hp eltriç
Love seeing these little flats boats come back to life. Where do you find these deals at?
love the boat builds man, you should open a shop and do this fulltime