ฝัง
- เผยแพร่เมื่อ 8 มิ.ย. 2024
- Cleaning and degreasing my Land Cruiser's dirty transmission and engine bay and making them look brand new! Today I completely degrease the filthy transmission and get it literally spotless using Super Clean degreaser and aerosol spray. This stuff works great for deep cleaning auto parts including engines, transmissions, axles, engine bays, etc and will melt off all the grease and grime! Now I can service this transmission, fix the leaks, and install low range gears in the transfer case without being covered in oil, grease, and grime! @SuperEasySuperFast
Follow me on Instagram:
/ _rmgarage
Links to Products Used in This Video:
Super Clean: amzn.to/3Ub46UY
Foaming Super Clean: amzn.to/3BcwnE7
My Pressure Washer: amzn.to/3VU72GZ
Camera Equipment:
Sony ZV1 Camera: amzn.to/3VX5koq
Rode Microphone: amzn.to/3He5Eux
Lens: amzn.to/3VYL0TD
Tripod: amzn.to/3BcYiDL
Other videos from this Land Cruiser 80 Series build!!
► Full playist: • 1993 Toyota Land Cruiser
► Restoring an Old Wiring Harness: • Restoring My OLD Wirin...
► Full Engine Teardown EXPLAINED: • Toyota 4.5L Inline 6 E...
► 1FZ Bottom End Teardown: • INSIDE A 230,000 MILE ...
► FZJ80 Engine Removal: • Removing My Land Cruis...
0:00 Intro
0:30 The Dirty Transmission and Engine Bay
1:36 Prepping the Transmission
2:55 The Degreaser I'm Using
4:08 Cleaning the Transmission
10:09 Final Results, Unbelievable!
10:46 Engine Bay Cleaning
12:49 Engine Bay Final Results
#toyota #diy #howto #landcruiser #rmgarage #cleaning #4x4 #offroad #auto #automotive - ยานยนต์และพาหนะ
That Transmission Came Out Super Clean! 💯
It’s a Saturday morning, having a cup of coffee and staring at my DD 91 LC and my newly acquired 94’ LC train wreck and looking for inspiration. This is certainly the right channel. Your hard work and well sorted efforts are appreciated.
“I’m not looking to make it perfect” makes it look perfect!😂
I need to remember this the next time I'll clean my car - remove the engine, spray it down and reinstall. :')
read my long comment...if it were not for some crappy shop work half a decade ago i,d have had no issues...and surely no oily engine anymore sicne mine was cleaned ( by myself! costs less than 10 bucks, no deinstall! ) and then got a new ventile head gasket....but be sure to seal the iron heads soon after the diesel/kerosene steamed offf.....bcs it starts to rust....
degreaser...tried this before, becomes a whitish messy soapy nightmare and ruins the plastics and neoprene...just throw some Aldi/ food store pallet cardboard ( for free, they hate to pay for the deposit of cardboards at the food chains) and one liter of kerosene...and old spray bottöe from some cleaner( empty...just to make sure for the "specialists" ) and 1-2 hours on a sunny afternoin in your driveway...ir even on the street! ...at the nd you fold the cardborad with the gunk and all the plastic rools for cheap and stuff th bundle to the burning trash...🤷♀️nonpollution of your yard, and costs around 10 bucks for a complete engine bay! no issue for any parts there, no corrosion and "clean" with a shiny oily surface, as good as you wipe it...use some gloves ( nitrile or latex, both dissolve soon, so use several) ...or sou need jkerosene or gasoline to clean your skin! you need some anyways...🤣
Shockingly clean! Didn’t think there was any hope for that transmission grime 😂
Don't let perfect be the enemy of 'done'...
Awesome job, I’m sold on Super Clean!
Thanks man!!
Subbed! Fellow Toyota guy here. I’m in the midst of rebuilding the engine and trans in my 2000 Celica GT-S. Going to use this method to clean all the oil grime up. Thanks!
Sweet!! Thank you!
great work. I'm humming along with you and my 94, built the harness like you as well with tesa and all that, thanks for the recommendations. One thing I am doing is having the steering box rebuilt with the 105 sector shaft. Common failure when offroad
I have that on my build list!
Who ever installs a dirty part should never touch another vehicle ever
I'm glad you have alot of time and money. I will send you my info, you can send me some.
Amen!!!
Yes, I love my Brother but he does sub-par work. Now I get to undo it. Bracing for the challenge. It's bad.
Correcto moondo
May as well replace all your pressure sensors on the transfer case now too. They go bad and cause your CDL to not engage. There's lots of info on mud about it. Love the vids👌
well, all the electronics no will have issues after a pressure wash anyways...he will learn about it as we all did...bcs i assume we all learnt idiotic ways to clean engines from some " experts". . .the issue is the source where the oil comes from and 30 yrs of zero approach to stop the leaking is bad enough....no kechnaik wanted to seal my engine heads( ventile head) till i payed wY too much for it,..but it was tight and dry for 5 yrs now! 🤷♀️wanted it done from the first day i had bought it...nope, they say itls "normal" ! 80% of all car engines leak! even new ones! ...
I did the same with my mitsubishi eclipse. I also used two detail brushes just to get the spots that are hard to get
awesome work
amazing video good job
Super clean!
Great video Ricky, such a satisfying job - and even to watch! Does the Super Clean come with the sick goggles too>! :D ;) Stacey and I both were like, "wow those fenders are green!" lol
Haha. I put them on because I kept getting grease water in my eyes. Lol! Thanks guys
You should be fine to support the trans on the pan, just use a block of wood in between the jack (according to the FSM).
Good work man! Looks so good
Thanks Clinton! I’m surprised how well it came out!
yeah and the grass and soil all around is now a hell of pollution too...surely looks good now,,,🤮
Looking good! Is it possible to leave the lines and cap? That way you can easily hook back up in future if need be. Keep up the good work!
I like how you’re thinking. Future proof it just in case. I’ll do that!
EPA will be visiting soon I bet 😂
nice work. Is your pressure washer hot water or cold? Is it a hi pressure or is it a cheapo model like mine?
If you ever do this again I would try to get a pressure washer with a heater and get the temp of the water to 180 degrees melts oil pretty good
Definitely will try that!
I'm in trouble a little bit with my newest project. OCD. IT'S GOT TO BE CLEAN!!!
Make a little stand to hold the transmission up. Craft it out of 2x4s
New subscribed from Somalia
Your my hero
Super Clean ! I needa do this for my 80 cuz my front main seal has seen cleaner days 🤣
We’re doing a giveaway for it!
@@RM_Garage hook it up! 80 series gang gl to me
@@1995Kakashi check out the giveaway post on Instagram! @_rmgarage
Which do you think works better? Liquid or foam?
Nice work! what kind of pressure washer are you using?
It’s a sunjoe spx…something, maybe spx3000?
Should look into at wits end rear heatee delete plate
I have looked at it!
Would you like to tell me the name of this degreaser because am from Pakistan
Just use starting fluid. Spray on .watch it do its magic
I wonder what all that cleaner did to his lawn.
Just use a hot steam pressure washer. No materials required. That's what they use in UK before they do bus/truck/lorry mots.
Might get one in the future. Have you seen the method they use to freeze and chip off the grease? Looks pretty interesting.
I'm thinking a 3000 psi pressure washer would do a much better job maybe even get a jitterbug nozzle
imagine having a real pressure washer u wont need second pass
😮😮wow
Use a brush, do not use too much water
next time use heavy duty stove/ oven cleaner
If I had cleaned it like you, only here in Germany, I would certainly have gone to prison - environment 😂🤦🏼♂️
But, Great Work!🎉
Use a cherry picker or what u call engine hoist
After just a wash : For sale fully rebuilt 6000$ 😂😂😂
Ha! I bet people do that too
what was the issue for cleaning the bottom/underside of that thing? you can.t just go down on your knees on the waste you just spread all around and wash it off? kidding? i get the idea people are all office workers who play tough...
God almighty...who has the time for a project like that?!
TH-camrs. Lol
Bro you need a better brush...
But it worked! Haha
at least he does not claim to repair anytjing with electrolysis or cooking methods in degreaser soup....all those methods are idiotic and ruin parts, his solution is agressive but better...best resluts you get with an old spray bottle from some window cleaner, fill iit with kerosene or Diesel....put some plastic and heavy card board under the engine,,,.spray the gunk and crape and brush it off with some stiff platsic toilet brush or sink brush or the like....the engine should not be dried out ir become wet at all, we only remove the gunk...and for that we use some heavy solvent without any fire hazzard....use gloves( latex or nitril) ...1 -2 hours for a whole engine compartement🤷♀️doens,t harm plastics or rubber/ neoprene at all....leaves the old shiny metal appearance of an ( almost) newly assembled engine...
many use oven cleaner and like he does wheel cleaner....wouldn,t do tthat as engines nowadays have lots of sensors and electric parts on it....and NEVER. use a brass brush on aluminium,,,.just get some discount 1,-/ pc, plastic brushes for whatever,.....and it really goes off well, then a lot pf kitchen papaer or shop cleaning paper....or old fabric scraps....and at the end all rolled up into the plastic/ big trash bag....off to the trash for burning without any pressure washer, no pollution to the groundwater or your yard,,,,it.s horrible how many oressure wash the engines in their garden! and wash some soup from detergent and solvents mixed with heavy metals and old oil and rust simply into the ground! for what? kerosene for lamps, one liter...3-5 bucks? a plastic scraper amd a brush.some gloves...makes mostly 10 bucks, and you get cardboard from Aldi for free, a trash bag or old plastic...cents! 🤷♀️and basically all around stays mostly clean! i did dis several times just in bikini and sandals and left the engine in my car...after the third time and chnaging the head gaskets to get the engine tight my car.s engine bay looks like now on a 1995 convert! my mechanik loves my car! the cost were minimal...4 th year i had nothing to clean anymore as she was dry and started to rust on the cylinder heads, bought 2 cheapest discout engine silver spray and picked up a pack of elswise trashed adverts paper ...costs ? 10 bucks again! ? 🤷♀️2 hours later my engine was silver, , stays rust free for 4-5 yrs now, same goes for the chassy....but we now fill all ridges and gadgets with heavy duty greasy ....once a year clean and spray the seams on the sheet metal parts on the underside...check on some simple places( never told in manuals) for greasing the hand shift and if the mechanic 6 yrs ago would have messed up the belt set job whixh sprung over this winter after just 60.000 km...( so basically just 2/3-1/2 of the official life! ) i.d haven,t had any issues that cost me 2 k extra...my new one switches some parts like suspension or tires or bearings every secomd or 3 rd year and my engine just gets new oil and filters...plugs ince in a while and runs like crazy....no gunk and no oil and nothing anywhere! AND NO DEGREASER ON ANY ENGINE !
Get a better nossle
Doesn’t look so amazing.
one should repirt this to the environmental agency for water pritection🤮pls never do this! see how blaxk the grass has become all over the place! it all soakes down into the ground water,...yes that,s what we actually drink! don,t do it the way he did! never!
These are not good degrease. They are not working at all. Good degrease should instantly dissolve the grease without pressure wash or brush wash.
😂😂😂 tell me youve never cleaned greasy 20+ year old car parts without telling me youve never cleaned greasy 20+ year old car parts, it never works like that, and what this guy had to clean was cake compared to some of the stuff ive seen and cleaned.
Uh, okay kid.