I watched this about two years ago and thought it was a great build. Just took delivery of my 1000 SRT and the exact same case, then stumbled on this video again. Now, let the mods begin! Thanks for the inspiration.
Excellent work, thank you for sharing. I have Ddj 800 with 2 sannheiser wiresless mics. Any issues with wireless mic reception or DMX. Where would you recommend placing wireless mics to make sure there are no issues.
Cool! I just used the half wave antennae in the rear of the case, as I show... but the ultimate solution would be to try to get them high up so that they always have line-of-sight to the wireless microphone (aka transmitter). :)
I have the same case but with the sliding laptop shelf. You'll be happy to know that ProX sells a side-shelf that attaches to the side... perfect for your ipad.
Thanks for the video. I just picked up a ProX case and want to put my wireless mic under the controller as you did. Where are your antennas for the mic?
There is a special place in hell for the 2 people who disliked this video! Great job Kevin. this makes me want to do a case build for my controller set up!
I have a similar lap top stand but the pole that's drilled into the case is to big to close the top lid. Where did you get your stand from. I like the idea of closing the top lid and ready to go. Thanks
Here you go! Got the idea from the man DJ Rick Web. FLEXIMOUNTS 2-in-1 Monitor Arm Laptop Mount Stand Swivel Gas Spring LCD Arm Height Adjustable Desk Mounts for 10''-24'' Monitor/ 11-17.3 inches Notebook www.amazon.com/dp/B00V33L7UK/ref=cm_sw_r_awdo_navT_a_HYZEKC0H9EG4FK913S5T
Wow just wanted. To say good job. I have. The ddj 800 i did the case build as well. What you said about the power con. Thing. I wasnt thinking along them lines. Im gonna get another 1 and change just like your. Never thought about. What happens if the. Power con fails
great mod! was curious about the black trim on the ProX case you have - is it prone to chips/scratches?? I had an Odyssey black label mixer case in past and the trim got pretty beat up.
hay you should switch out your usb c hub i used the same one and it dose not like stuff hanging off i did the same than and it got warn out and didn’t work
I just did a case build for the 1000 and used a 1u rack drawer to hold stuff in. it works well as you can see everything needed underneath of the controller.
Here’s a link to the case (with controller combo). www.proaudiostar.com/pioneer-ddj-1000-prox-case-2.html?Google_Shopping&gclid=CjwKCAiAq8f-BRBtEiwAGr3Dga6mmtIRA8ibtGPWOgJOm4fIXnPjFWE2R5voC2lhmpsA5ODmD_79MRoC_YQQAvD_BwE I believe I say the model number of the case in the video :)
I have seen this video mutiple times really like the mods, my question is how did you get the gooseneck for the mic installed what parts did you use to fasten it to the foam. I think we can all agree having a great mic stand that doesn’t interfere with anything is a plus when we are at a gig. Hope to hear from you soon
Good Job. I bought the Gator case that is just like yours about 6 years ago. I have done the same thing that you have done. Everything is mounted under my ddj-SX2. The only thing that I have that's different than yours is that I have my cables coming out of the case facing toward me. I don't like the audience to see any cables. I also have 1 slight issue with the arm. You have to be light on touching your Macbook keyboard and mouse or it bounces the laptop. That will make it hard to read the song names and move the mouse to do the right thing. All and All I love it. The other sliding shelf that most cases have killed my back. Too low and too far away. oh 1 more thing that I like about mine is that the laptop arm brings the laptop to eye level so I don't look down.
Super great job. Can you put a link and all the stuff you used to build that case that will be nice, I'm asking you because I have the ddj 1000 and I want to have the same setup. Thanks you in advance.
@@SmilestonesDJAdventures thanks for the info. I really like this build. I want to mimic it down to the last screw. Lol! We all need to pay you and Rick Webb for your intellectual property. lol!
Awesome mod dude 👏🏽. Observation - it took quite a few seconds to get those wing nuts off those long screws to free your laptop stand - maybe cut the screws down a bit? Just a suggestion 🤷🏽♂️
Hey Kevin nice work I’m doing something similar. A couple of questions, the stub thats in the foam for the quick connect, what’s it called or where did you get it and how did you install it 7:52
Sorry for the very late reply -- If you're still interested in the quick connect parts here's a quick video I just made for a friend - th-cam.com/video/oL2-1smgR-c/w-d-xo.html
@@SmilestonesDJAdventuresHe did great work on it. You mention it was from a piece you found at Sam Ash's. Do you remember what the original piece was? Thanks for the reply.
Kevin 👏🏾👏🏾 answer to my prayers right there buddy. Been trying all sorts to cut down on set up times. Have you a link for this actual laptop shelf please. Just love this…
FLEXIMOUNTS 2-in-1 Monitor Arm Laptop Mount Stand Swivel Gas Spring LCD Arm Height Adjustable Desk Mounts for 10''-24' Monitor/ 11-17.3 inches Notebook
Hey thanks Mark! No noticeable heat or effects from being too hot under there, even outside in the summer (though I try not to stay in direct sun for long with any gear :) )
@@SmilestonesDJAdventures thank you so much for getting back, I’m in the UK so we don’t really suffer with too much heat I think I’d keep the shelf rather than the stand but love everything wise you’ve done, I also see your iPad mount in another video which I also love, did you buy it online? Also the mic neck? I get some things might be different in the uk as in we might not be able to get the same things
Have you used this at a gig yet? I have a similar Shure wireless microphone and MyDMXGo and was concerned about the wireless connectivity. Great video!
I never comment or anything on here but your MOD looks great man! Great quality and very detail info. Also to top it off great quality video filming. Just had a question on info of the laptop arm on where and what’s the model info on it. I have a ddjsr and I have the ODY flight case with the sliding laptop tray but I’ve been thinking for a while to remove since i have to be constantly bending over the controller too look at my laptop while mixing or even when I want to play with the knobs I have to move the sliding part in and out
@Kevin: If you could provide the part numbers for your mic stand and gooseneck mount, that would be awesome! I've been on chat with Sam Ash support, and they cannot seem to locate these items.
Manny - I did it because 1) it locks tight and won’t pull out, and 2) some of the other case mods I saw did it so I thought it was the cool thing to do 😅
Dope! This inspired me to build my own. I managed to fit the laptop shelf under the case with the microphones on the left side and put all my gear on the right. Is your case tough to close? The foam on mine is thick and when I close it I'm always afraid I'm breaking something
Hi Kevin! Great Video! I have some questions for you and i was hoping that perhaps you could share some light on these matters, presupposed that youve been using and testing the DDJ-1000 for recordbox yourself? Hotque buttons dont seem to want to start a track right after being loaded, and they also dont seem to work when there is a loop applied on that particular beat, any ideas why? Back in serato dj your loop stayed there untill you deactivated it.. no matter what other buttons you pushed. Second issue is the RCA master output on the ddj 1000 is creating stuttering,distorted cutsounds like as if it is being overamped when its not, when recording a video of any lenght with my phone through an TRRS adapter. Again, i didnt have any of these problems on my ddj SX with serato dj.. Any ideas? Thanks in advance and have a good day :)
Hey! I really like MyDMXGo but it is not rock-solid reliable. I've found a good system that works for me and has been reliable and consistent, however many others haven't had the same luck. If you're techy and willing to deal with a few glitches here and there for an AWESOME and easy lighting control, then it could work for you!
@@SmilestonesDJAdventures Thanks for taking the time to reply. If you don’t mind, could you tell me the main issues you run into? I understand there’s a limit for distance of connectivity being that the wireless runs on the busy 2.4 frequency range.
Check out the Facebook group for the myDMX GO - it’s got several tips but also you can read about issues other folks have had. Here’s a post I made a few months back that lists some fixes I borrowed or figured out. Also I plan to do a full video on this topic on this channel soon! Posting this just as informational for folks having issues. After about a year of great luck right out of the box (no real issues), the mydmx GO started to drop out and act sporadically. My setup is pretty basic: iPad mounted to my controller case, mydmx GO inside case, Donner wireless DMX, two Chauvet Wash FX 2 ‘s and two ADJ Inno spot moving heads. After reading this group and elsewhere I did 5 things: 1. Used hardware manager from the Light Rider website on my MacBook to update the mydmx GO firmware - I looked and didn’t have the latest version 2. Used hardware manager to change the WiFi channel to 11. (I realize that some folks are scanning each venue and updating based on how crowded the channel is - might be a good practice) 3. Inserted a 2ft DMX cable between the mydmx GO and my Donner transmitter 4. Relocated the mydmx GO so that it is about 1 - 1.5 ft away from the wireless Donner transmitter and also the mydmx GO antenna is within line of site (and very close to) my iPad. 5. With a recent IOS update, my home WiFi network setting switch from manual to auto connect- I switched this back. Previously I made sure that all other WiFi networks were deleted or set to manual- no other settings seemed to be changed (Previously I had also set my iPad screen to stay on, and not go to sleep) I’ve now had 3 events without issues. In fact things seem better, because before now I would have to reset and reconnect if I left my iPad connected to the mydmx GO for a couple hours before using it - which happened a lot as I would arrive at a venue, setup, test, and then run ceremony/cocktail/dinner/etc all without using the light show. Hope this helps someone who like me loves mydmx GO but gets frustrated at intermittent performance!
How does the BLX microphone treat you? Interested in getting the same one...have heard a lot of complaints regarding drop outs though. is it pretty solid for you?
@@SmilestonesDJAdventures thank you for that! I recently bought a shure ULXS4 used for fairly cheap, havnt had a chance to use it yet, I plan on building that into my case but would like to have 2, just in case! So I was looking into doing one ULX and one BLX but maybe I'll bite the bullet and buy a second ULX for it and mount the antenna in the rear like you mentioned
Great job. Love how you thought everything through especially with the power cord. One thing Though I’m pretty sure you have to own the songs your playing so by hooking up someone else’s phone to play the songs you don’t have you might be a NO NO lol plus I’m sure you know sometimes not having every song isn’t such a bad thing. Some people’s ideas of a awesome song they think will get everyone dancing 9 times out of 10 don’t heck most of the time the person asking for it won’t dance to it. 22 years of doing this I find it best to act all into the song they asked for and tell them if I have it I will play it as fast as I can and smile. They walk away happy and your not the bad guy. Hope this all made sense to you. Keep doing what your doing I still have a ton to learn and look forward to learning.
Mr Pan Cake man well put. I was about to go on the same rant. It is a great setup but he needs to learn to pay for his tracks. If he doesn’t have it just say “no”
Great job. I would shorten the screws on the top of the case, that holds the laptop tray. You will save a couple of seconds, as they don't need to be that long.
@@SmilestonesDJAdventures i did the same, setup all equipment i Need inside the case and cables to connect, Easy to go and start at the event, less stress ti packing all the time. Now i do i new video with a magma case XXL LITE for a new setup up
@@MACODJ totally agree. We need to minimize the stress, having to remember everything, plus TIME! :) Getting everything into a magma would be quite a feat! That’s not alot of space. Would love to see it!
FLEXIMOUNTS 2-in-1 Monitor Arm Laptop Mount Stand Swivel Gas Spring LCD Arm Height Adjustable Desk Mounts for 10''-24'' Monitor/ 11-17.3 inches Notebook
@@SmilestonesDJAdventures we saw that milisecond of hesitation ;D hard tekk djs shud learn from wedding dj community but for real, one can see who spins more often lol ;D
Thanks Fleetwood! Hope your project goes well! I’m sorry that I don’t remember the exact size - I remember taking the mount base to the hardware store, along with my case measurements, to be sure I bought the best size
Awesome video and great content. I’m always skeptical on storing things with my controller as I don’t want the unit to get damaged. Have you had any issues? Thanks and be well
Hey thanks! I was super careful to ensure that everything was either fixed in place (Velcro or screwed in, etc) or had 0 wiggle room to bounce around in the case during transport. It worked well for me with no issues !
Great job on the mod of the case, I would like to do exactly that for my DDJ1000. The powercon and the xlr are the most ideal mod for a case that I have seen in a long time. How much extra did you invest for the mod ?
I watched this about two years ago and thought it was a great build. Just took delivery of my 1000 SRT and the exact same case, then stumbled on this video again. Now, let the mods begin! Thanks for the inspiration.
Awesome brother! Good luck with your build!!
Great job on your mod. I may knock this out over the holiday break.
Excellent work, thank you for sharing. I have Ddj 800 with 2 sannheiser wiresless mics. Any issues with wireless mic reception or DMX. Where would you recommend placing wireless mics to make sure there are no issues.
Cool! I just used the half wave antennae in the rear of the case, as I show... but the ultimate solution would be to try to get them high up so that they always have line-of-sight to the wireless microphone (aka transmitter). :)
Love the set up can you share the links of mic goose stand and arm
Late reply sorry th-cam.com/video/oL2-1smgR-c/w-d-xo.html
I have the same case but with the sliding laptop shelf. You'll be happy to know that ProX sells a side-shelf that attaches to the side... perfect for your ipad.
Kevin Summers I use mine to hold a second mic receiver, light controller or laptop... find it very handy.
Such helpful video for mobile (or any) DJs!
Hey thanks!
Very nice! 👍
Thanks for the video. I just picked up a ProX case and want to put my wireless mic under the controller as you did. Where are your antennas for the mic?
I just put them in the rear, and would set them upright. Nothing fancy or permanent. :)
That’s a bad ass set up. Love that all black look 👍🏽 You take pride in your work, thank you for sharing this.
Thanks man! Appreciate that
Great Set Up,What Brand is the table you are using?
There is a special place in hell for the 2 people who disliked this video! Great job Kevin. this makes me want to do a case build for my controller set up!
DJ LoStax 7
I agree
17 SPOTS LOL
i know I'm quite randomly asking but does anyone know a good website to stream new tv shows online ?
@Holden Briggs i use Flixzone. You can find it by googling =)
I have a similar lap top stand but the pole that's drilled into the case is to big to close the top lid. Where did you get your stand from. I like the idea of closing the top lid and ready to go. Thanks
Here you go! Got the idea from the man DJ Rick Web. FLEXIMOUNTS 2-in-1 Monitor Arm Laptop Mount Stand Swivel Gas Spring LCD Arm Height Adjustable Desk Mounts for 10''-24'' Monitor/ 11-17.3 inches Notebook www.amazon.com/dp/B00V33L7UK/ref=cm_sw_r_awdo_navT_a_HYZEKC0H9EG4FK913S5T
Link to the laptop stand would be great. Awesome build!
a.co/d/0mgPMiD
Great video , I have a question... the mic receiver been under the controller, does it limits the reception? Do you get drop outs ?
Kevin Summers please do an update vid when you do that mod
Nice Video, Thanks for Sharing. How do you like the Fastset Table? Is it stable with the case on top?
Hey thanks Tom! Can’t say enough good about the Fastset. I use it for several different things - it’s my go to table !
Wow just wanted. To say good job. I have. The ddj 800 i did the case build as well. What you said about the power con. Thing. I wasnt thinking along them lines. Im gonna get another 1 and change just like your. Never thought about. What happens if the. Power con fails
@Kevin: By the way, your setup is brilliant. The more I watch this video, the more I admire your small innovations!
@@SmilestonesDJAdventures I couldn't locate your headphone holder either... But I did find this: hifidjsgear.com/#3fabc444-4dc8-4d5c-a0f9-a30aae65478c
Awesome set up. You need to start making these. I would be your first customer. :-)
Ahhaha Thanks Mike I should do that! :)
@@SmilestonesDJAdventures
It would definitely be a good side hustle
Just go ahead and ship that to me send me the invoice lol
@@TheRealDjMikeStone lol!
great mod! was curious about the black trim on the ProX case you have - is it prone to chips/scratches?? I had an Odyssey black label mixer case in past and the trim got pretty beat up.
Sweet setup. One of the best I have seen 👍
Thanks!! I made a 1 year update video on this channel also - just to show a few lessons learned and changes!
Can you tell me where did you get the foam that is placed on the lid for the platters? Thanks i really appreciate it! Nice video too! loving it!
hay you should switch out your usb c hub i used the same one and it dose not like stuff hanging off i did the same than and it got warn out and didn’t work
I just did a case build for the 1000 and used a 1u rack drawer to hold stuff in. it works well as you can see everything needed underneath of the controller.
Great job! I saw one on DJ Rick Webb's YT for his Serato controller. Is there a link to purchase the case you could post, plz
Here’s a link to the case (with controller combo). www.proaudiostar.com/pioneer-ddj-1000-prox-case-2.html?Google_Shopping&gclid=CjwKCAiAq8f-BRBtEiwAGr3Dga6mmtIRA8ibtGPWOgJOm4fIXnPjFWE2R5voC2lhmpsA5ODmD_79MRoC_YQQAvD_BwE
I believe I say the model number of the case in the video :)
I have seen this video mutiple times really like the mods, my question is how did you get the gooseneck for the mic installed what parts did you use to fasten it to the foam.
I think we can all agree having a great mic stand that doesn’t interfere with anything is a plus when we are at a gig.
Hope to hear from you soon
Good Job. I bought the Gator case that is just like yours about 6 years ago. I have done the same thing that you have done. Everything is mounted under my ddj-SX2. The only thing that I have that's different than yours is that I have my cables coming out of the case facing toward me. I don't like the audience to see any cables. I also have 1 slight issue with the arm. You have to be light on touching your Macbook keyboard and mouse or it bounces the laptop. That will make it hard to read the song names and move the mouse to do the right thing. All and All I love it. The other sliding shelf that most cases have killed my back. Too low and too far away. oh 1 more thing that I like about mine is that the laptop arm brings the laptop to eye level so I don't look down.
Great clean set up. What table are you using
This is the Fastset DJ table in this video. Awesome table that I still use today for some applications.
Great video! What did you use for the mic stand piece that goes into the foam, I found the quick connect piece but how did you rig it into the foam?
Thanks Joe! Check this out th-cam.com/video/oL2-1smgR-c/w-d-xo.html
Hi I love the case! For the microphone quick release attachment Is it bolted down in the foam? If so, how did you bolt it down? Thank you!
Late reply :) th-cam.com/video/oL2-1smgR-c/w-d-xo.html
That's a rather impressive setup you've engineered - well done!!
Thanks Clyde!!
@@SmilestonesDJAdventures I have another question, where can I find the black xlr adapters?
Flat out awesome. Any chance of your listing/linking the items you used in this brilliantly conceived case modification?
Check Out Rick Webbs Videos on Case Mods he has a few videos with links to what he is using in his case build.
Great video,
What’s the name of laptop stand?
It’s a Fleximounts laptop arm, purchased on Amazon!
@@SmilestonesDJAdventures
Thanks
Wow!! Incredible! I can finally visualize my new Dj setup! Great review and tour of the setup! Great video!
Do u have a link, where to buy the laptop Arm?
Super great job. Can you put a link and all the stuff you used to build that case that will be nice, I'm asking you because I have the ddj 1000 and I want to have the same setup. Thanks you in advance.
Awesome job!
Case manufacturers need to catch onto this wave
@@SmilestonesDJAdventures Whats the mic stand base?
@@SmilestonesDJAdventures thanks for the info. I really like this build. I want to mimic it down to the last screw. Lol! We all need to pay you and Rick Webb for your intellectual property. lol!
Would you be kind enough to tell me what kind of adapter you used to hold the quick microphone release down in the hard foam.
Yoooo check this out: th-cam.com/video/oL2-1smgR-c/w-d-xo.html
Awesome mod dude 👏🏽. Observation - it took quite a few seconds to get those wing nuts off those long screws to free your laptop stand - maybe cut the screws down a bit? Just a suggestion 🤷🏽♂️
Looking for the exact part for the tru1 flush mount for the outside
NAC3MPX this one
Kevin Summers 👍
Hey Kevin nice work I’m doing something similar. A couple of questions, the stub thats in the foam for the quick connect, what’s it called or where did you get it and how did you install it 7:52
Sorry for the very late reply -- If you're still interested in the quick connect parts here's a quick video I just made for a friend - th-cam.com/video/oL2-1smgR-c/w-d-xo.html
Great video, what is the part you used for the headphone hanger? Thanks
My brother welded it for me
@@SmilestonesDJAdventuresHe did great work on it. You mention it was from a piece you found at Sam Ash's. Do you remember what the original piece was? Thanks for the reply.
@@loganoler6017 no sorry I don’t recall. It was just a metal wire headphone piece I believe
I'm very interested in what mic stand that is? And how did you set that up. Kinda went by fast for me
Sure… I got that question a lot so I made a little video about it! th-cam.com/video/oL2-1smgR-c/w-d-xo.html
Kevin 👏🏾👏🏾 answer to my prayers right there buddy. Been trying all sorts to cut down on set up times. Have you a link for this actual laptop shelf please. Just love this…
FLEXIMOUNTS 2-in-1 Monitor Arm Laptop Mount Stand Swivel Gas Spring LCD Arm Height Adjustable Desk Mounts for 10''-24' Monitor/ 11-17.3 inches Notebook
This is absolutely amazing, does it get hot underneath your controller?
Hey thanks Mark! No noticeable heat or effects from being too hot under there, even outside in the summer (though I try not to stay in direct sun for long with any gear :) )
@@SmilestonesDJAdventures thank you so much for getting back, I’m in the UK so we don’t really suffer with too much heat
I think I’d keep the shelf rather than the stand but love everything wise you’ve done, I also see your iPad mount in another video which I also love, did you buy it online? Also the mic neck? I get some things might be different in the uk as in we might not be able to get the same things
iPad mount is a stage ninja. Here is a video about the mic holder and parts: th-cam.com/video/oL2-1smgR-c/w-d-xo.html
What kind of laptop mount is that? Can you post links to your additions?
Fleximounts brand , bought over Amazon
Have you used this at a gig yet? I have a similar Shure wireless microphone and MyDMXGo and was concerned about the wireless connectivity. Great video!
I never comment or anything on here but your MOD looks great man! Great quality and very detail info. Also to top it off great quality video filming. Just had a question on info of the laptop arm on where and what’s the model info on it. I have a ddjsr and I have the ODY flight case with the sliding laptop tray but I’ve been thinking for a while to remove since i have to be constantly bending over the controller too look at my laptop while mixing or even when I want to play with the knobs I have to move the sliding part in and out
Off topic but for your ddj 1000....do u use a usb 3.0, 2.0, or thunderbolt 3?
Thanks so much for the great information. I have the SRT and will look to make similar mods. Thanks again!
😀
Does anyone know if the laptop sliding shelf can be bought separately? And where 🤔
Very, very, very cool!! Nice modding!! That is awesome! Have fun and enjoy! 😉
Where did u get that laptop arm?
@Kevin: If you could provide the part numbers for your mic stand and gooseneck mount, that would be awesome! I've been on chat with Sam Ash support, and they cannot seem to locate these items.
Here are the parts - sorry for the very late reply th-cam.com/video/oL2-1smgR-c/w-d-xo.html
How much does it weight?
Nice build. Very well thought out. Looks nice as well. Thanks for sharing.
Is there a reason why you used a Powercon connector vs a C14 for the power source?
Manny - I did it because 1) it locks tight and won’t pull out, and 2) some of the other case mods I saw did it so I thought it was the cool thing to do 😅
Love the setup.. Been planing how to mod my case... Your setup uf the best for what I do too.. Thanks for the video and ideas that it give me
Awesome man thanks!
Great build! Can you send a link for the quick release gooseneck clamp?
Late reply :) th-cam.com/video/oL2-1smgR-c/w-d-xo.html
I finally found this case practically new today for $150 haha. Had to get it before someone else did
@@SmilestonesDJAdventures Thank you! Can wait to pimp it out haha
Dope! This inspired me to build my own. I managed to fit the laptop shelf under the case with the microphones on the left side and put all my gear on the right.
Is your case tough to close? The foam on mine is thick and when I close it I'm always afraid I'm breaking something
Hi Kevin! Great Video!
I have some questions for you and i was hoping that perhaps you could share some light on these matters, presupposed that youve been using and testing the DDJ-1000 for recordbox yourself?
Hotque buttons dont seem to want to start a track right after being loaded, and they also dont seem to work when there is a loop applied on that particular beat, any ideas why?
Back in serato dj your loop stayed there untill you deactivated it.. no matter what other buttons you pushed.
Second issue is the RCA master output on the ddj 1000 is creating stuttering,distorted cutsounds like as if it is being overamped when its not, when recording a video of any lenght with my phone through an TRRS adapter. Again, i didnt have any of these problems on my ddj SX with serato dj..
Any ideas? Thanks in advance and have a good day :)
I am trying to figure out your microphone stand build. Do you have a video that explains it?
Check this out man : th-cam.com/video/oL2-1smgR-c/w-d-xo.html
👍🏾
What dj table are you using?
It’s a Fastset - fastusa.com
Any way you post links to where you purchased accessories
What's the RCA cable towards the back for?
Attached a phone or another music source :)
I have one more question what size of laptop do you use? I'm planning of getting a 15inch so I'm trying to visualize how it would look with my setup
Great job, bro
If I want one like this, how ❤ you can help me
Great mod ... I really like that laptop stand solution.
That is an awesome setup man, I have a sumilar flight case for my numark ns7iii. I'm thinking abt doing a setup like that? NICE
How do you keep your controller from tipping over inside your case?
Fantastic job!! Love the Headphone holder. I miss the Booth-out, but other than that it looks complete. 🙌
Hi where did you get your mic holder from
Here’s a little video about that! th-cam.com/video/oL2-1smgR-c/w-d-xo.html
Do you recommend the DMX Go lighting control? Thinking about using it for my wireless Uplights
Hey! I really like MyDMXGo but it is not rock-solid reliable. I've found a good system that works for me and has been reliable and consistent, however many others haven't had the same luck. If you're techy and willing to deal with a few glitches here and there for an AWESOME and easy lighting control, then it could work for you!
@@SmilestonesDJAdventures Thanks for taking the time to reply. If you don’t mind, could you tell me the main issues you run into? I understand there’s a limit for distance of connectivity being that the wireless runs on the busy 2.4 frequency range.
Check out the Facebook group for the myDMX GO - it’s got several tips but also you can read about issues other folks have had. Here’s a post I made a few months back that lists some fixes I borrowed or figured out. Also I plan to do a full video on this topic on this channel soon!
Posting this just as informational for folks having issues.
After about a year of great luck right out of the box (no real issues), the mydmx GO started to drop out and act sporadically. My setup is pretty basic: iPad mounted to my controller case, mydmx GO inside case, Donner wireless DMX, two Chauvet Wash FX 2 ‘s and two ADJ Inno spot moving heads. After reading this group and elsewhere I did 5 things:
1. Used hardware manager from the Light Rider website on my MacBook to update the mydmx GO firmware - I looked and didn’t have the latest version
2. Used hardware manager to change the WiFi channel to 11. (I realize that some folks are scanning each venue and updating based on how crowded the channel is - might be a good practice)
3. Inserted a 2ft DMX cable between the mydmx GO and my Donner transmitter
4. Relocated the mydmx GO so that it is about 1 - 1.5 ft away from the wireless Donner transmitter and also the mydmx GO antenna is within line of site (and very close to) my iPad.
5. With a recent IOS update, my home WiFi network setting switch from manual to auto connect- I switched this back. Previously I made sure that all other WiFi networks were deleted or set to manual- no other settings seemed to be changed
(Previously I had also set my iPad screen to stay on, and not go to sleep)
I’ve now had 3 events without issues. In fact things seem better, because before now I would have to reset and reconnect if I left my iPad connected to the mydmx GO for a couple hours before using it - which happened a lot as I would arrive at a venue, setup, test, and then run ceremony/cocktail/dinner/etc all without using the light show.
Hope this helps someone who like me loves mydmx GO but gets frustrated at intermittent performance!
Im having my powercon amd xlr cables from the front not the rear with a bracket dont want to make holes on my new case
nice
where do you get your mic stand for the case
@@SmilestonesDJAdventures whats is it called on their
@@SmilestonesDJAdventures i wanna get a mic stand like urs but I dont know what it called to look it up on online
Late reply but... th-cam.com/video/oL2-1smgR-c/w-d-xo.html
Link for goose neck mic stand.?
Hey Jeremy, here’s a video with links in the description th-cam.com/video/oL2-1smgR-c/w-d-xo.html
How does the BLX microphone treat you? Interested in getting the same one...have heard a lot of complaints regarding drop outs though. is it pretty solid for you?
@@SmilestonesDJAdventures thank you for that! I recently bought a shure ULXS4 used for fairly cheap, havnt had a chance to use it yet, I plan on building that into my case but would like to have 2, just in case! So I was looking into doing one ULX and one BLX but maybe I'll bite the bullet and buy a second ULX for it and mount the antenna in the rear like you mentioned
Hey bro, what's the name of the vesa arm you got ?
It’s a Fleximounts :)
No Decksaver?
Good point! Oh yes that was a fast follower :) in fact I made a video about some little updates
th-cam.com/video/t1KaSz154C8/w-d-xo.html
Great job. Love how you thought everything through especially with the power cord. One thing Though I’m pretty sure you have to own the songs your playing so by hooking up someone else’s phone to play the songs you don’t have you might be a NO NO lol plus I’m sure you know sometimes not having every song isn’t such a bad thing. Some people’s ideas of a awesome song they think will get everyone dancing 9 times out of 10 don’t heck most of the time the person asking for it won’t dance to it. 22 years of doing this I find it best to act all into the song they asked for and tell them if I have it I will play it as fast as I can and smile. They walk away happy and your not the bad guy. Hope this all made sense to you. Keep doing what your doing I still have a ton to learn and look forward to learning.
Mr Pan Cake man well put. I was about to go on the same rant. It is a great setup but he needs to learn to pay for his tracks. If he doesn’t have it just say “no”
What size hole you drill for the mic
Great job. I would shorten the screws on the top of the case, that holds the laptop tray. You will save a couple of seconds, as they don't need to be that long.
@@SmilestonesDJAdventures I also liked the quick release mic nib and will look for one for my case.
Yes great tip - I actually did that! I’ve posted a 1 year “update” video here on my channel, and showed that. It is helpful to speed things up!
Love it, what laptop stand is that?
It’s a “fleximounts”, from Amazon!
Good job man Easy to setup on One moment, zero thinking what to not forget
Thanks Maco!
@@SmilestonesDJAdventures i did the same, setup all equipment i Need inside the case and cables to connect, Easy to go and start at the event, less stress ti packing all the time. Now i do i new video with a magma case XXL LITE for a new setup up
@@MACODJ totally agree. We need to minimize the stress, having to remember everything, plus TIME! :)
Getting everything into a magma would be quite a feat! That’s not alot of space. Would love to see it!
@@SmilestonesDJAdventures ahhh i know, i do new video of a new nice magma case, follow my Channel
What’s the model of the laptop pop up stand?
FLEXIMOUNTS 2-in-1 Monitor Arm Laptop Mount Stand Swivel Gas Spring LCD Arm Height Adjustable Desk Mounts for 10''-24'' Monitor/ 11-17.3 inches Notebook
How many people had heart pulpitations when u put laptop stand on platter ;D well done, nice1!
@@SmilestonesDJAdventures we saw that milisecond of hesitation ;D hard tekk djs shud learn from wedding dj community but for real, one can see who spins more often lol ;D
Man you’ll done a great job!!! What screws (exact size) did you use for the arm mount? And the size for the laptop holder? Working to do mine tomorrow
Thanks Fleetwood! Hope your project goes well! I’m sorry that I don’t remember the exact size - I remember taking the mount base to the hardware store, along with my case measurements, to be sure I bought the best size
Thanks for always getting back
Great video!!!!! Really like what you did. Gave me some great ideas. Thank you 🙏🏻
can we get a parts list for your custom mic stand
Late reply :) th-cam.com/video/oL2-1smgR-c/w-d-xo.html
Recommend wireless Mic Antenna Extenders for Wireless Mic Receiver.
Dude this is beautiful... I'll have to try this!
Do you have a list of the parts? Anyway you can email them? Djalvarezentertainment@gmail.com
DJ Anthony Alvarez did you ever receive that list? Citizensgate1@gmail.com / send it my way if so.
Super dope bro...makes me want to make one!
Awesome video and great content. I’m always skeptical on storing things with my controller as I don’t want the unit to get damaged. Have you had any issues? Thanks and be well
Hey thanks!
I was super careful to ensure that everything was either fixed in place (Velcro or screwed in, etc) or had 0 wiggle room to bounce around in the case during transport. It worked well for me with no issues !
@@SmilestonesDJAdventures awesome thanks! Looks like a lot of work up front, but probably saves you close to 20 mins of set up time! Be blessed
Awesome set up well done sir.
This is a really cool case
Thanks for the ideas I'll try some of it
Link to laptop mount?
Sure here you go!
www.amazon.com/FLEXIMOUNTS-Monitor-Computer-11-17-3-Notebook/dp/B00V33L7UK
Great job on the mod of the case, I would like to do exactly that for my DDJ1000. The powercon and the xlr are the most ideal mod for a case that I have seen in a long time. How much extra did you invest for the mod ?
Great video
Where are you mic antennas?
In the rear