Great video Matt, fantastic job with detailing every step of the process! One thing I would suggest, would be to paint the two supporting sides for the laptop shelf to give it a fully finished look. Again, great video! 👍🏼
Sorry about that, I did not have a case made of plywood to compare with. I can only tell you that working with plywood panels you can immediately feel the weight difference handling these composite panels. I did put the weight in the description of the finished composite case. Hope that helps!
Fantastic video. I really appreciate the amount of effort you put in Matt! In terms of installing foam to secure the DJ hardware, how can we do that? And where would be a good place to buy that foam from?
Thanks so much! I received the foam for diyroadcases.com. Here's a link: www.diyroadcasesstore.com/foam-1-thick-ester/ It may be a good idea to call them to check on the best foam to use for your application. They also sell the spray adhesive for applying the foam, though it can also be purchased locally. Hope this helps!
You speak well and clear I like it . Just wondering more or less how much a kit like this would cost a poor man like me for a DDJ-400 all I can afford for now . If I get better as a Dj I'll move up to a wedding Dj at least that's what I'am hoping for a lil extra cash wouldn't hurt. Trying to make a dollar or 2 for my daughter to go to college which I definitely can't afford. just a poor man trying to see where I can save some mo mo Money. Thanks by the way I like your TH-cam video.
Thank you for your comments! You would have to contact DIY road cases for pricing on their kits. I did not purchase the kit, they sent it to me to do the build as a sample.
Hi Mr. Molnar. Thanks for the video; very instructive and easy to follow! I have a great difficulty getting corner brackets to finish off the ends (in fact also with extrusions); any suggestions for alternative solutions? Great job!
In the UK there's a brand made by EMS it's a modular 19" rack.you can change hight/depth using bolt together panels. Can't change Ali flight case ones once they've been built?
Imo, I would of put the heavy handles on the bottom part of the case instead of the lid. I know those latches are designed to "hook" together, but if the latches ever give way (or you forget to fully latch them properly), you will be left holding the lid while the bottom falls to the floor. Also, having the handles on the bottom half makes it so much easier to move the case around even after it has been set up and the lid removed. Nice looking case though.
Thanks for the comment! Good point on the handle location. I built the case to spec, so had no choice in this. That being said, I don’t think the dropping issue should be a concern, as the latches are very robust, and you would have to being fairly negligent to leave enough latches open to experience a “drop”. Moving the case after it is opened is a good point, though. I think the gear it holds would be fairly light and the case is fairly light, so again, probably not a big deal to move around without handles. More convenient with handles, though.
Hi matt - is this 3/8" or 1/2" composite panel? I need to build large, essentially flat cases (like 96" x 48" x 6"), and I'm curious as to how much deflection I should expect in the middle of the panel with average loading/unloading use. I don't think I've ever seen this kind of panel in person before...for that kind of case would you opt for plywood over the composite? Weight is a serious concern, cost is secondary. Thanks
Good question! It is fairly rigid, though I don’t think as rigid as plywood. I guess it would depend how much weight is pressing against it and what kind of interior protection you had for your goods. I would suggest you get a hold of DIYroadcases.com. They could probably give you more specific numbers to help you decide if this material works for your intended purposes.
@@joekyle3479 I'll take a closer look later and see how much the material deflects with weight. The spans you are talking about are pretty large, obviously. I would think a plywood box of that size would be pretty heavy, maybe 150 lbs. Yikes!
Hi Matt, thanks for the video. Just wandering if the composite panels you have are the same as polycarbonate panels like Twinwall or Corflute. The names of these panels differ depending in which country your in. Is there a link to these panels that are similar. I tried DIYroadcases, but the info was kinda vague
Mo Sulusi Hi Mo! I’m don’t have any info on the panels. Sorry about that! Did you talk to Diyroadcases support? They have always been able to get me any info I have needed.
can you build me a custom one? I need one for a pioneer ddj sx2.But I need it to be like 19'' high because all the other one are to low and Ii have a bad back.
I don't see why not. They make a strong case. The one thing to consider though, is if you need to attach much to the panels themselves. The material does not have the properties of plywood and wouldn't be the best choice if you had to, say, hang a monitor with an articulating arm on the side of your booth. It could be done, but you would have to put an inner reinforcement in such a situation. In my plywood Photo Booth I glued pieces of thicker wood to the inside to use as mounts for powerstrips, etc. This material would require a different approach. It's advantage is it's light weight.
I was looking for a case that will fit my Mackie Profx16v2 and bottom 5U or 6u, and I don't think your case will do, but just for curiosity how much are you selling the case for ? and I also noticed that the video was 5 months old..
Would sell for $150 plus actual Shipping cost. I do have interior foam I would include. I didn’t glue that in because I wanted to keep layout options open. Yes, I built it back in June, I think it was.
Great video Matt, fantastic job with detailing every step of the process! One thing I would suggest, would be to paint the two supporting sides for the laptop shelf to give it a fully finished look. Again, great video! 👍🏼
SoCalRob Yea, I thought that too. Thanks for the positive words!
Very well put together video. I appreciate the info on making this.
Thanks so much!
ufff
lento el video pero muy instructivo!! gracias Matt
and i have waited for the exact weight comparism... but anyhow - good video
Sorry about that, I did not have a case made of plywood to compare with. I can only tell you that working with plywood panels you can immediately feel the weight difference handling these composite panels. I did put the weight in the description of the finished composite case. Hope that helps!
@@MattMolnar10 ya just saw it. thx
Fantastic video. I really appreciate the amount of effort you put in Matt!
In terms of installing foam to secure the DJ hardware, how can we do that? And where would be a good place to buy that foam from?
Thanks so much! I received the foam for diyroadcases.com. Here's a link: www.diyroadcasesstore.com/foam-1-thick-ester/
It may be a good idea to call them to check on the best foam to use for your application. They also sell the spray adhesive for applying the foam, though it can also be purchased locally. Hope this helps!
You speak well and clear I like it . Just wondering more or less how much a kit like this would cost a poor man like me for a DDJ-400 all I can afford for now . If I get better as a Dj I'll move up to a wedding Dj at least that's what I'am hoping for a lil extra cash wouldn't hurt. Trying to make a dollar or 2 for my daughter to go to college which I definitely can't afford. just a poor man trying to see where I can save some mo mo Money. Thanks by the way I like your TH-cam video.
Thank you for your comments! You would have to contact DIY road cases for pricing on their kits. I did not purchase the kit, they sent it to me to do the build as a sample.
Hi Mr. Molnar. Thanks for the video; very instructive and easy to follow!
I have a great difficulty getting corner brackets to finish off the ends (in fact also with extrusions); any suggestions for alternative solutions?
Great job!
Thanks so much! Perhaps you mean these?
www.diyroadcasesstore.com/categories/Corners/Flat-Corners/
In the UK there's a brand made by EMS it's a modular 19" rack.you can change hight/depth using bolt together panels. Can't change Ali flight case ones once they've been built?
You take customizing a road case to another level all the other "hacks" just start drilling holes all over the damn things
Well, thanks so much for the encouragement!
Thank you. Nice.
Thanks for the nice comment!
Great video... I was wondering is there a specific place that you would recommend to buy the material.
Thanks! I got everything from www.diyroadcases.com
Imo, I would of put the heavy handles on the bottom part of the case instead of the lid. I know those latches are designed to "hook" together, but if the latches ever give way (or you forget to fully latch them properly), you will be left holding the lid while the bottom falls to the floor. Also, having the handles on the bottom half makes it so much easier to move the case around even after it has been set up and the lid removed. Nice looking case though.
Thanks for the comment! Good point on the handle location. I built the case to spec, so had no choice in this. That being said, I don’t think the dropping issue should be a concern, as the latches are very robust, and you would have to being fairly negligent to leave enough latches open to experience a “drop”.
Moving the case after it is opened is a good point, though. I think the gear it holds would be fairly light and the case is fairly light, so again, probably not a big deal to move around without handles. More convenient with handles, though.
Good Job buddy!
DJ DANNY B Thank you!
Hi matt - is this 3/8" or 1/2" composite panel? I need to build large, essentially flat cases (like 96" x 48" x 6"), and I'm curious as to how much deflection I should expect in the middle of the panel with average loading/unloading use. I don't think I've ever seen this kind of panel in person before...for that kind of case would you opt for plywood over the composite? Weight is a serious concern, cost is secondary. Thanks
Good question! It is fairly rigid, though I don’t think as rigid as plywood. I guess it would depend how much weight is pressing against it and what kind of interior protection you had for your goods.
I would suggest you get a hold of DIYroadcases.com. They could probably give you more specific numbers to help you decide if this material works for your intended purposes.
@@MattMolnar10 thanks for the info! I think the best option is to order a few samples. This video was very helpful.
@@joekyle3479 I'll take a closer look later and see how much the material deflects with weight. The spans you are talking about are pretty large, obviously. I would think a plywood box of that size would be pretty heavy, maybe 150 lbs. Yikes!
Hi Matt, thanks for the video. Just wandering if the composite panels you have are the same as polycarbonate panels like Twinwall or Corflute. The names of these panels differ depending in which country your in. Is there a link to these panels that are similar. I tried DIYroadcases, but the info was kinda vague
Mo Sulusi
Hi Mo! I’m don’t have any info on the panels. Sorry about that! Did you talk to Diyroadcases support? They have always been able to get me any info I have needed.
What size blind revits ,washer you used thanks
3/16 by 3/4 long. Washers are 1/2" diameter.
wow, nice!
good video thanks where can I buy all the parts I live in sacramento ca
www.diyroadcases.com
How to buy alluminum or where to buy alluminum like that
If you Google “Road case parts”, you will find a number of sources for the aluminum.
Thnx for the uploud bro 👍
For sure...thanks for commenting!
Are the panels made of corrugated board, like the ones politicians used to advertised ?
No, they are much more substantial. Thicker, too.
BILL OCAMPO )
How do you weatherproof your lid grooves? Any rubber gasket product that you recommend?
The lid extrusions interlock, but there is really no way to waterproof them. There’s no room for an O-ring.
where do you get the corrigated plastic sheet and what thickness are the sheets?
Here’s a link: www.diyroadcasesstore.com/ultra-lite-flite-composite-sheet-3-8-thick-black-only/
dam first time seeing your video came out great how much would a progject like this cost for a DDJ-400. Great video by the way
Thanks! I'm not sure on the cost for your project. Contact diyroadcases.com for an estimate.
Remember those eye protection glasses
DJ Cichlid
You’re right! Thanks!
WHERE DID YOU GET YOU PARTS FROM TO BUILD THIS CASE? MINES WILL REQUIRE WHEELS. I HAVE TURNTABLES.
Www.diyroadcases.com
Hi dear what is name of cutting tool for square cutting. This orang color tool??
Prakash Suthar
It’s a Fein oscillating multi tool. Wonderful tool!
can you build me a custom one? I need one for a pioneer ddj sx2.But I need it to be like 19'' high because all the other one are to low and Ii have a bad back.
I wish I could. I just don’t have the time. Life is so busy! Thanks for commenting!
Hi Matt, can I use this panels for a Mirror Photobooth?
I don't see why not. They make a strong case. The one thing to consider though, is if you need to attach much to the panels themselves. The material does not have the properties of plywood and wouldn't be the best choice if you had to, say, hang a monitor with an articulating arm on the side of your booth. It could be done, but you would have to put an inner reinforcement in such a situation.
In my plywood Photo Booth I glued pieces of thicker wood to the inside to use as mounts for powerstrips, etc. This material would require a different approach. It's advantage is it's light weight.
@@MattMolnar10 Will this material be ok if you install recessed casters?
By the way, thank you for making a great instructional video.
Con Corrales
Casters shouldn’t be a problem.
how much the cost? all of it?
Contact diyroadcases.com for current pricing. I received this kit to demo for them.
Where did you purchase the slides
You can get them at most Woodworking supply stores, like Rockler.
Hola como puedo conseguir las partes amigo
You can go to www. Diyroadcases.com for help in designing your case and ordering the necessary hardware for your build.
Which is material?
Vladan Prokopovic www.diyroadcasesstore.com/super-flite-hd-composite-sheet-3-8-thick-black/
How replace butterfly lock
Drill out the rivets
Is this case still for sale?
Yes, but shipping might be tough, as it’s pretty large.
What are the dimensions and weight?v@@MattMolnar10
I’ll take measurements when I get home
4645dlouth
31x23x12.5”
@@MattMolnar10
I am interested. Does it also include the sliding shelf for the laptop?
Price for all the kit ?
Check with diyroadcases.com
I’m selling this one. I built it for demo purposes.
I was looking for a case that will fit my Mackie Profx16v2 and bottom 5U or 6u, and I don't think your case will do, but just for curiosity how much are you selling the case for ? and I also noticed that the video was 5 months old..
Would sell for $150 plus actual Shipping cost. I do have interior foam I would include. I didn’t glue that in because I wanted to keep layout options open.
Yes, I built it back in June, I think it was.
That's a good price, it just won't fit my Profx16