Thanks for the positive feedback! Our design means that we don't need support under the trigger guard to prevent unwanted motion, and that allows us to fully undercut the trigger guard area.
I like this guy. Going to look at your Glock 19 OWB holsters. May also get this for the P365 when I make that purchase! Appreciate all your work making solid carry options.
I just bought a werkz holster for my G19x with an olight baldr mini. Very nice holster for a great price. If I decide to get the tlr7 sub for my p365xl I will definitely buy a werkz holster for it.
I recently picked up this holster (M6), and it's been great! I did make one addition however that has made it even better (for me). I attached a small Wedge from T1Concealed to increase how much the upper area, and the pistol grip pushes into you.
Nearly a year later and carrying almost every day, and night I can testify, that this holster is my favorite light bearing holster out of a dozen that I own.
Thanks Christopher for your feedback! The P365 / TLR-7 Sub holster we have has many subtle changes that make the holster work well for the subcompact P365.
I have a sigp365 SAS and I want to buy the TLR-8® G SUB GUN LIGHT WITH GREEN LASER would you have a holster that is compatible? Outside waistband carry and it would be right handed .? I sent a message via your website as well.
Our holster finder at werkz.com/ currently shows our M6 IWB holster for the P365 / TLR8Sub. I appreciate you reaching out, but looks like we do not have an OWB option at this time.
Great question! Our holsters are rather precise, and the retention is built against the light. You'll need the light to lock into the holster properly.
Yes, that's essentially a P365 from a holster perspective. I should put that on our holster finder though to show explicitly that it's covered. Thanks for the reminder!
I have one it’s very uncomfortable it is made way to big for a regular 365 with a tlr7 . Way to much extra material and creates hot spot when wearing . I’m getting rid of it .
The problem I have is I put an O light mini with an after market rail on the p365 xl. I really like the lights brightness and the way it recharges. I have an owb for a g19x with an O light that’s amazing. Would that end up being a custom holster? I’m sure I’m not the only one that went about installing a light like this, since there are about 3 lights that can snap on the the proprietary rail system of the 365 and 365 xl.
I have been searching for a holster that will fit my p365xl + tlr-8 sub and think you guys have one of the best designs in the M6. However, I wasn't able to select a right-handed option when searching your website. Will the right handed option be available soon? I also have a Glock 43x + tlr-8 sub combination I'd love to pair with your M6 holster. Will this option ever be available? Thanks for your time.
Yeah, Glock made enough changes to their G22/5 that it doesn't fit in holsters for the G17/5. If we get enough demand, we'll make a holster, but G22/5 demand is low, and TLR-8 demand is also low. I appreciate your confidence in our products, but don't have anything for you right now.
Once we heard about the new TLR-7 SUB update, we made new designs for these holsters to make sure they work with both versions - the original and the update. So yes! They will now work for you!
Is there a way to visually check the difference between the updated and original? I can't find any comparison photos. I purchased mine pretty recently and I assumed the issues were addressed, but mine rocks back and forth regardless how tight I torque it down.
@@skyungjae Usually the key / rail attachment has your light sit in a different position than the original. I would reach out to Streamlight and ask for the updated attachment just in case, and if you're still having issues, they should be able to help you.
Ordered my lefty m6 holster yesterday. Can't wait to try this baby out when it gets here.. i didn't see an option to add a mag carrier for the sig p365. Did I not see it?
We don't test with or support any aftermarket 3rd party rails at this time; our experience has been that each one of them puts the light into a different spot than would be if the light was fit directly onto a factory rail (Sig Sauer rail in this case).
Yessir. The holster is cut to cover the XL. The shorter P365 just has some extra room at the end of the barrel before the material ends. Additionally comps will drop through.
Gun will literally not come out of the holster , even with screws loosened , i gave specific information about my gun . Not wasting my time shipping it back either . Literally trashed it after scuffing up my gun & tlr-7
Having been in firefights you would be surprised how easy it is to get point fixated. The look around looks stupid, but it's good training to keep situational awareness. You dont want to drop a Mahdi, just to have his bunk buddy brain you from the flank.
just got mine in today.. my first impressions are.. great fit and feel!!! (most comfortable awib holster ive ever owned) only cons are that it doesnt click when i holster.. also the belt clip is too stiff.. (minor cons) i highly recommend this holster!!!! edit: holster does not let you draw cleanly.. sticks because my fat gut is pressing the holster tight.. wont work for my fat a$$ im buying a different holster*
Thanks for the feedback! The TLR-7 and TLR-7 Sub is notoriously difficult to get to "click". We went through numerous revisions to end up with the design you're using. If we add more retention (for "click") then the light catches and won't draw smoothly. We typically do get a little click at the very end of reholstering on the Subs. If it doesn't have that extra retention when fully seated, please let customer service know; we may need to see if we can help you get it tuned better.
I’m 6’4, roughly 330lbs. As a fat guy IWB is challenging in general but this holster negates the overwhelming majority of my issues with it. I have noticed through extensive dry fire and live fire with this holster that I really have to shove my hand in to get a good grip and rip it out as hard/directly up as I can. I have yet to find a holster that works anywhere near as well as this with the light bearing capability. *end user experience may vary*
@@Redchew10 Thanks so much for sharing your feedback. If you have a few minutes to chat, I would like to check in with you. Email customer service products@werkz.com and tell them you're Redchew10 from TH-cam and that Shan wanted to talk with you. They'll get your email over to me. That is if you have time and willingness to talk. Blessings!
You should just look to the Phlster enigma or get a groove belt or some other webbing belt and wrap that around your waste and then use the ulticlip to grab on to that. There are many ways to carry in sweat pants you just have to do the digging.
Excellent point. We don't have the P365x listed in our holster finder; I'll get that added! It's the same as the P365 regular. This will work if you're right handed. werkz.com/m6sgp365xlsttlr7spr.html
The M6 clip can be moved right height lowered. If you bought the M7, we have another option for you that we just released, the Origin. werkz.com/o3sgp365xlsttlr7spr.html Either way, customer service will take care of you. Blessings!
@@raudi Got it. Thanks for the feedback. The lower position tends to put the trigger guard below the belt line, but if that's not enough, you can either return it or use c-hooks to further lower. We have a satisfaction guarantee... get with CS and they'll take care of you.
The TLR-7 does not fit on a factory P365. There are far too many different aftermarket rail products for the P365 for us to even begin making holsters for them.
@@jerseyltd Yes. I mean the P365 and the P365XL. www.sigsauer.com/p365-xl.html That pistol doesn't have a pic rail, so the TLR-7 (NON-SUB) won't fit. We have holsters for the P365 and the P365XL with the Streamlight TLR-7 Sub P365 (specific model for the P365) as shown in this video. Hope that helps!
I think that's a question best answered by Icarus Precision. I suspect their module would need the TLR-7 Sub 1913, or even a TLR-7A, but that's just me looking at their product photos.
Please contact customer service products@werkz.com and we'll take care of you. We fit and test each holster with the actual pistol (not a replica) before it ships.
Just got this exact holster. Much more comfortable than the stranton tactical holster I had. I’m not disappointed in this purchase.
Okay how you guys cut the holster allowing for a full grip on draw with a claw is amazing
Thanks for the positive feedback! Our design means that we don't need support under the trigger guard to prevent unwanted motion, and that allows us to fully undercut the trigger guard area.
I like this guy. Going to look at your Glock 19 OWB holsters. May also get this for the P365 when I make that purchase! Appreciate all your work making solid carry options.
I just bought a werkz holster for my G19x with an olight baldr mini. Very nice holster for a great price. If I decide to get the tlr7 sub for my p365xl I will definitely buy a werkz holster for it.
Thanks for the positive feedback Jason!
I recently picked up this holster (M6), and it's been great! I did make one addition however that has made it even better (for me). I attached a small Wedge from T1Concealed to increase how much the upper area, and the pistol grip pushes into you.
Werkz is great. Bought several holsters for several systems.
Hey thanks for your support!
Just got mine in the mail today!! Love it
Just got mine and I’m super happy with it. Thanks
Wonderful! That particular holster has taken a number of revisions to get feeling "right".
Finally purchased one. Have heard many good things about it.
Nearly a year later and carrying almost every day, and night I can testify, that this holster is my favorite light bearing holster out of a dozen that I own.
Just ordered one for my G23 with a Pl Mini 2 Valkyrie... Can't wait to try it out
I’m waiting for my iwb holster from Werkz now love their holsters gonna be running my xl with a tyrant t-comp holosun 507kx2 and tlr -7sub
I was very excited about this! Please please make a left!
These are available today in both left and right hand configurations. Go to werkz.com/ to see our full selection!
Love this company!!!
Thanks! That's high praise from a founding father!
I love my Werkz light bearing holster for my G19!!! May have to get one for my 365! The claw is amazing! Performs exactly as advertised!
Thanks Christopher for your feedback! The P365 / TLR-7 Sub holster we have has many subtle changes that make the holster work well for the subcompact P365.
I have a sigp365 SAS and I want to buy the TLR-8® G SUB GUN LIGHT WITH GREEN LASER would you have a holster that is compatible?
Outside waistband carry and it would be right handed .?
I sent a message via your website as well.
Our holster finder at werkz.com/ currently shows our M6 IWB holster for the P365 / TLR8Sub. I appreciate you reaching out, but looks like we do not have an OWB option at this time.
@@WerkzHolsters that k you for the response
Thanks looking for this, just bought one 😎
I bought this holster and one from Vedder.... and I definitely like the Werkz much better.
Really ? I just ordered a vedder light tuck was debating between these two might have to order this one to
Have you discontinued the knife accessory at 4:13 ? I don't see it on your website.
You guys should consider making different colors. And what is the deal with the round and hills all over the holster?
Can you use the holster with and without the light installed? Or do you have to have the light on the weapon for retention?
Great question! Our holsters are rather precise, and the retention is built against the light. You'll need the light to lock into the holster properly.
Would this holster work with the TLR-8 SUB ?
Our holster finder at werkz.com/ will show you options for your pistol and light. Currently, we have our M6 holster for the 8Sub / P365. Thank you!
Is your holster compatible with Philster Enigma / and p365 .380? Do you have one that is? great videos -
Your website does not offer IWB holster for P365XL with streamlight TLR 7 sub light.
Do your holsters work the Wilson grip modules? And do you offer an ultiClip?
Yes, and we do not resell UltiClip, but customer service products@werkz.com can tell you which versions we recommend.
What about the p365x? If so this is a game changer!
Yes, that's essentially a P365 from a holster perspective. I should put that on our holster finder though to show explicitly that it's covered. Thanks for the reminder!
The P365X is just a P365 with a P365XL grip module...they didn't change anything about th grip besides how tall it is.
I have one it’s very uncomfortable it is made way to big for a regular 365 with a tlr7 . Way to much extra material and creates hot spot when wearing . I’m getting rid of it .
Will the retention still work if the light has a wrap on it?
I cannot find a right handed draw version of your P365/Streamlight tlr7 IWB.
I got one. Not super happy I can get my finger on the trigger and pull it while in the holster.
Hello! Thank you for letting us know. Please email us photos at products@werkz.com and we can get you taken care of!
This is what I'm worried about. Did they get it fixed for you or is that just the way it's got to be in order to allow the wider light?
@@Andoz777 ?
Just got the OWB holster for the P365 X Macro with Baldr/Mini I like the holster but the pistol does seem to have some back and forth wiggle
How long did it take to receive from the time u placed the order
The problem I have is I put an O light mini with an after market rail on the p365 xl. I really like the lights brightness and the way it recharges. I have an owb for a g19x with an O light that’s amazing. Would that end up being a custom holster? I’m sure I’m not the only one that went about installing a light like this, since there are about 3 lights that can snap on the the proprietary rail system of the 365 and 365 xl.
I appreciate the desire, but there are a few issues. I addressed some at 2:24 of this video: th-cam.com/video/qg6upHMvG_U/w-d-xo.html
Just ordered my TLR-7 sub light for my Sig P365 xl, on your holster is the sweat guard, is there room for my safety switch on the guard??
Does the M6 work with a P365 XL with manual safety?
Is this holster compatible with the Phlster Enigma system?
Would it still fit snug without the light?
No, this question was asked and answered already. It uses the light for better retention.
Will this holster work with the p365xl/TLR7 sub and the the TD 1913 rail adapter
Will this fit my p365 and my p365XL with sub light?
Can this work with manual safety model?
so, if my sig has the external manual thumb safety will it fit this holster?
or will i need to modify the sweat shield?
We build all our Sig holsters to clear the manual safety. We test with the M17. You're good to go!
@@WerkzHolsters ok, cool!
I have been searching for a holster that will fit my p365xl + tlr-8 sub and think you guys have one of the best designs in the M6. However, I wasn't able to select a right-handed option when searching your website. Will the right handed option be available soon?
I also have a Glock 43x + tlr-8 sub combination I'd love to pair with your M6 holster. Will this option ever be available? Thanks for your time.
We are working on adding TLR-8 Sub models...
Wondering when they’ll offer a gen 5 G22 for the TLR8. I’d like to run a laser. But they only offer for the 7 and 7a. And older.
Yeah, Glock made enough changes to their G22/5 that it doesn't fit in holsters for the G17/5. If we get enough demand, we'll make a holster, but G22/5 demand is low, and TLR-8 demand is also low. I appreciate your confidence in our products, but don't have anything for you right now.
Do you have a Surpa for P365XL 3.7barl.
Will this work with the updated TLR7 Sub? I have a holster(not werkz) for the original sub that doesn’t fit the updated version.
Once we heard about the new TLR-7 SUB update, we made new designs for these holsters to make sure they work with both versions - the original and the update. So yes! They will now work for you!
@@WerkzHolsters awesome I was kinda worried . Lol
Is there a way to visually check the difference between the updated and original? I can't find any comparison photos. I purchased mine pretty recently and I assumed the issues were addressed, but mine rocks back and forth regardless how tight I torque it down.
@@skyungjae Usually the key / rail attachment has your light sit in a different position than the original. I would reach out to Streamlight and ask for the updated attachment just in case, and if you're still having issues, they should be able to help you.
Ordered my lefty m6 holster yesterday. Can't wait to try this baby out when it gets here.. i didn't see an option to add a mag carrier for the sig p365. Did I not see it?
Sorry we do need to get on the mag carrier for the P365! That is in my design queue and I spend too much time on other things!
Will this work with the tactical application rail? I know the light sits slightly further back with it.
We don't test with or support any aftermarket 3rd party rails at this time; our experience has been that each one of them puts the light into a different spot than would be if the light was fit directly onto a factory rail (Sig Sauer rail in this case).
@@WerkzHolsters we want a version with the tac rail as it makes the platform look much better
Will there be a version with a spare mag holder?
We will make Radius Mag carriers for these yes.
What did you use to attach the light I don’t want to get a rail attachment that is to thick for the holster
The P365 specific version of the TLR-7 Sub mounts directly on a P365 grip module. No need for aftermarket rail adapters!
The holster works for the 365/365xl?, I have both pistols and one holster for both is just what I need!
Yessir. The holster is cut to cover the XL. The shorter P365 just has some extra room at the end of the barrel before the material ends. Additionally comps will drop through.
Are your holsters compatible with the philster enigma light bearing rig?
Yes, Our M6 line is compatible!
Gun will literally not come out of the holster , even with screws loosened , i gave specific information about my gun . Not wasting my time shipping it back either . Literally trashed it after scuffing up my gun & tlr-7
Hey Nick! I'll get you taken care of! Can you please email me at JamisonV@Werkz.com
Do you have a IWB that can accommodate this set up but with tactical development rail installed?
Unfortunately, as of right now, none of our holsters work with aftermarket rails.
TD has had compatible holster manufacturers listed for quite some time.
Can you cut the holster so it matched the p365? vs the xl barrel length?
Customers can (and do) modify holsters to meet their needs and wants. I've seen all sort of creative modifications!
Sold
Looking for a IWB appendix holster for my set up. Sig 365XL with Tactical Development's rail, using a Streamlight TLR-7 Sub 1913 light.
Sorry we don't support 3rd party rail systems at this time.
They make the TLR-7 Sub in four models. One is specifically for the Sig without any rail adapter.
Wish it came with a tuckable clip
Not everyone wants those, so we offer as an additional accessory.
@@WerkzHolsters thanks I will check out the options
I have a holoson on my 365xl along with the tlr7
It should fit well? Plz let me know :D
All of our holsters work with red dots. Just make sure you have the correct Streamlight TLR-7 Sub (P365) and you're good to go!
@@WerkzHolsters awesome! I just ordered mine :D thank you guys!
shoot.. look right look left.. derp!!
Having been in firefights you would be surprised how easy it is to get point fixated. The look around looks stupid, but it's good training to keep situational awareness. You dont want to drop a Mahdi, just to have his bunk buddy brain you from the flank.
Hey can I get that with a threaded barrel that is longer as well with the light and the sight?
Our holsters support a variety of common modifications including threaded barrels and tall sights.
@@WerkzHolsters oh ok thank u than where can I order one I have my gun with the extended threaded barrel and soon I'm going to get rhe tlr 7 sub light
@@jesusyedra4521 werkz.com is where our products are available.
Do you guys have these fitting the tac dev rails?
Check out 2:24 at th-cam.com/video/qg6upHMvG_U/w-d-xo.html
just got mine in today.. my first impressions are..
great fit and feel!!! (most comfortable awib holster ive ever owned)
only cons are that it doesnt click when i holster..
also the belt clip is too stiff..
(minor cons)
i highly recommend this holster!!!!
edit: holster does not let you draw cleanly.. sticks because my fat gut is pressing the holster tight.. wont work for my fat a$$
im buying a different holster*
Thanks for the feedback! The TLR-7 and TLR-7 Sub is notoriously difficult to get to "click". We went through numerous revisions to end up with the design you're using. If we add more retention (for "click") then the light catches and won't draw smoothly. We typically do get a little click at the very end of reholstering on the Subs. If it doesn't have that extra retention when fully seated, please let customer service know; we may need to see if we can help you get it tuned better.
I’m 6’4, roughly 330lbs. As a fat guy IWB is challenging in general but this holster negates the overwhelming majority of my issues with it. I have noticed through extensive dry fire and live fire with this holster that I really have to shove my hand in to get a good grip and rip it out as hard/directly up as I can. I have yet to find a holster that works anywhere near as well as this with the light bearing capability.
*end user experience may vary*
@@Redchew10 Thanks so much for sharing your feedback. If you have a few minutes to chat, I would like to check in with you. Email customer service products@werkz.com and tell them you're Redchew10 from TH-cam and that Shan wanted to talk with you. They'll get your email over to me. That is if you have time and willingness to talk. Blessings!
need this! do yall make for 43x too?
I believe so. Glock 48 as well
Will this work with sweatpants? Is the clip tight enough ?
If you want something tighter, the Ulticlip may be used. That is one advantage of having the accessory holes.
You should just look to the Phlster enigma or get a groove belt or some other webbing belt and wrap that around your waste and then use the ulticlip to grab on to that. There are many ways to carry in sweat pants you just have to do the digging.
Will this holster work with the TLR 7A
It will not, sorry!
will it work with red dot?
Yes.
So how about TLR7A with rail adapter?
See 2:24 of: th-cam.com/video/qg6upHMvG_U/w-d-xo.html
Is this the same for the p365x?
Yes. One of our designers is using the P365x with the Sub as his EDC.
Do u have one for the olight buldar mini
See 2:24 of: th-cam.com/video/qg6upHMvG_U/w-d-xo.html
will there be a tlr 6 holster?
It's not super likely, but you can use our holster notification form at Werkz.com to make your request (link at the bottom of all our pages).
I need the link to buy for my 365x
Excellent point. We don't have the P365x listed in our holster finder; I'll get that added! It's the same as the P365 regular. This will work if you're right handed. werkz.com/m6sgp365xlsttlr7spr.html
Just bought this. It rides too high for my taste. Probably will return mine.
The M6 clip can be moved right height lowered. If you bought the M7, we have another option for you that we just released, the Origin. werkz.com/o3sgp365xlsttlr7spr.html Either way, customer service will take care of you. Blessings!
@@WerkzHolsters I bought the m6 and moved it to the lowest position.
@@raudi Got it. Thanks for the feedback. The lower position tends to put the trigger guard below the belt line, but if that's not enough, you can either return it or use c-hooks to further lower. We have a satisfaction guarantee... get with CS and they'll take care of you.
Looking for a holster that can fit my Sig P365XL with a TLR 7
The TLR-7 does not fit on a factory P365. There are far too many different aftermarket rail products for the P365 for us to even begin making holsters for them.
@@WerkzHolsters no i have the XL with a rail. I was wondering who makes holsters to fit my 365XL with a TLR 7a light
Or do you mean the p365 in general?
@@jerseyltd Yes. I mean the P365 and the P365XL. www.sigsauer.com/p365-xl.html That pistol doesn't have a pic rail, so the TLR-7 (NON-SUB) won't fit. We have holsters for the P365 and the P365XL with the Streamlight TLR-7 Sub P365 (specific model for the P365) as shown in this video. Hope that helps!
@@WerkzHolsters thank you so much
Why is that irritating background noise necessary? It adds nothing and serves to complicate understanding what is said for the hearing impaired.
Thank you, well work on having higher quality audio from now on.
Does the holster work with a P365 Wilson Combat frame?
I don't have the that frame here, but Wilson Combat advertises their frame to be holster compatible, and from the pictures I believe it is.
Is it compatible with the Icarus precision grip module?
I think that's a question best answered by Icarus Precision. I suspect their module would need the TLR-7 Sub 1913, or even a TLR-7A, but that's just me looking at their product photos.
Are these compatible with the phlster light bearing enigma?
Our M6s can be used on the Enigma, but you will need to remove the claw off our holster.
will this holster work with the XMACRO?
It will not. We have a dedicated holster for the XMacro. You can use our holster finder on our website and it will take you right to it!
@@WerkzHolsters I checked the site but I’m running a TLR7A on the Macro, didn’t see that combination
Does this holster fit the Streamlight TLR 7 A?
I just got my m6 for the sig with tlr-7 sub, but is it supposed to be so tight on my gun? It looks like it’s start to scratch the front of my slide?
Please contact customer service products@werkz.com and we'll take care of you. We fit and test each holster with the actual pistol (not a replica) before it ships.