2022 Suzuki GSX-R 750 Oil and Filter Change
ฝัง
- เผยแพร่เมื่อ 22 ต.ค. 2023
- This is the break-in oil and filter change for my 2022 GSX-R 750. It's very easy and I go step by step. The hardest part is removing the left fairing for access, but that's not really hard, either. I always recommend doing maintenance yourself as you'll save money and know it's done right. In the US, this will never hurt your warranty. #suzuki #motorcycle #motorcyclelife #losangeles
- ยานยนต์และพาหนะ
I never miss an oil change, it's probably the most important part of servicing your bike. One of bikes is a 1989 BMW R80 airhead, bought it new and it's now got 170,000 miles on the clock and still going strong on the original bores. Hope to see the Bullet soon! 🏴
Very cool with your 89 R80! Yes, oil changes are definitely the most important thing you can do. Enfield videos coming next!
Good video doing my GSXR 750 oil change next week, gonna attempt a coolant change also
Nice! And sorry for the late reply
What size oil filter removal adapter cap is that? I need to buy one
Either 67mm or 68mm - I don’t have it in front of me. However, here’s the part number for it - 09915-40620
always have trouble getting my oil right in the middle. don’t think i wait enough time or somethin between checking it and adding more
This bike has been easy, actually. I always shoot for it to be just a bit low, wait overnight and see. It’s always easier to add than take out. My Ducati is more temperamental with this.
@@Cyclingwithgasoline always end up having it a bit high. super annoying
@@Cyclingwithgasoline how would you recommend taking some out? think i’m .1 .2 of a quart too high
@@joemommaganja Two ways. You can loosen the drain plug until it starts spilling out, then tighten it when you’ve removed enough. Don’t fully remove the plug. It’ll be a little messy, but obviously have a pan underneath and just wipe anything away with a shop rag. I’ve also removed oil with an extractor, which is basically just a giant syringe with a tube that you carefully push down the filler cap into the pan. It’s definitely the easier and cleanest way to do it, but be sure to have something to put the removed oil into.
@@Cyclingwithgasoline think letting some out through the oil filter would be a decent idea? haven’t been able to find a extractor long enough. i know i could but..
update on bullet?
New video (hopefully) in about 24 hours. It's finished, just need to finish editing. I'll give you a hint, the bike is completely reassembled and almost ready to start. I need a new petcock that mysteriously froze, but that'll be here in a few days. Otherwise, we're basically at the finish line.