Impala Caprice Front Brake Pad Replacement Procedure

[@T.-14]

Thank you for this video, I have been rattling my brain on this issue. Every time I drove my 94 impala, I would hear a rattle but when I applied the brakes I wouldn’t hear it. Thank you so much I’m going to tackle this first thing in the morning. I really appreciate it.

[@Mikerogers77]

Thanks for the video 10 min each side, next week rear pads

[@johannes-maximilianbrede9135]

thanks a lot!! i fixed the brake pads on my 1986 chevy caprice using your tutorial! :D worked like a charme, although i had to press the brake cylinder with a gripper

[@CarRepairsMadeEasy1]

Thanks for watching. feel free you join our forum at forum.carrepairsmadeeasy.com this is where we are trying to build a community it that can ask questions and share information with us and each other.

[@dhealy3154]

Thank you

[@m.pietro9087]

Thanks for the video. I have a 96 Buick Roadmaster and I intend to upgrade the brakes. The idea is to replace the front brake calipers for a bigger one. Do you know if the 96 Impala SS has a bigger caliper than the one used in the Roadmaster?

[@MrBigron1438]

very helpful video thanks. but where can I find those pads? I went to the ac delco site and they dont have those exact pads so is the dealership the onlt way?

[@formeitwastuesday.1515]

I think I'm missing the small pin that goes on the break pad to help center it on the caliper. The new breaks I bought did not come with new ones.

[@mlp8500]

Did not know the hammer trick I have chattering on my 85 front brakes same setup

[@Knuckingfutz1]

Nice video but wish you showed what yoi actually bent with thr hammer and where to hit. That's the key part and wasn't filmed.

[@freddylv702able]

So you didnt repack the bearings or resurface the rotors??? Good job mr ase. Haha

[@ImDeletable]

What if my piston isn’t pushed back? Does the car need to be in neutral?

[@kentbernard1117]

do you spray lube prior to disassembly

[@Anth4044]

Thanks 👍💯

[@ahoorakia]

back of the bolts are not sliding,you gotta lube those little sliding pin inside the caliper ear,and pack the bearings!!

[@meandthemrs7403]

Hey. A mechanic that doesn't have to use an air ratchet on everything.

[@wesragnar9231]

3/8 Allen type what?

[@codynoahconn]

The head of the bolt takes a 3/8 allen wrench

[@johnbeer5242]

😨oh no u dropped one screw almost at the end that's a new screw u have to buy 😁😄😄😄✌😀🍻😁

[@kentbernard1117]

quick way isnt the best way mr mechanic