Panda Touch - Screen Upgrade for Bambu Lab P1P/S
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Checking out the Panda Touch Screen Upgrade for Bambu Lab 3D Printers
Buy it here: geni.us/9yacZK
BIGTREETECH Panda Touch, Compatible with Bambu-lab P1S/P1P/X1C/A1/A1 Mini 3D Printers, Touch Screen Upgrade Kit, Support AMS and Multi-Printers Management, Please Check Firmware Compatibility First
Plug and Play
BTT Panda Touch V1.0 is a 5-inches plug-and-play touch screen upgrade kit that’s similar to the look and feel of the original X1C touchscreen. Just 2 main steps(dock installation + wiring) to easily get it installed, and then you can release the full capabilities of Bamboo Lab P-series printers to reach X-series experience!
2 Charging Modes for Portability
BIGTREETECH Panda Touch features magnetic charging with the equipped magnetic charging dock and USB cable without extra power supply! And its built-in lithium battery also allows 30 mins of wireless portable life, so that you can take it away anywhere in the house or print farm to control your printers.
AMS Management
Panda Touch introduces a groundbreaking upgrade to Bamboo P/X/A series by providing an unparalleled, intuitive experience with direct control of the AMS.Supporting up to 4 AMS units with 16 filament slots per printer on up to 10 printers, you can effortlessly manage and customize filament types, colors, and printing temperatures with BTT Panda Touch. Make multi-colors printing effortless on any Bamboo-Lab machine!
Up to 10 printers Control
BTT Panda Touch enables simultaneous control and monitoring of 10 Bamboo-Labs printers ranging from P1/X1 to A1 series (up to 20 printers under firmware v1.0.3). We've developed multiple group control techniques which allows you to set one printer as a master and other as followers, or to set each printer as its own master. If you have more than one Bamboo machines then Panda Touch will give you the fine grained group control that you've been looking for.
Multiple Functions
Panda Touch help to control your Bamboo printers freely, it supports AMS management, portable control, LED light control, print head and heatbed control, fan speed control, TF Card / U disk reading, printing files management,Auto search Bamboo printers within the LAN; Multi-printers control and management and so on.
About Compatibility
Panda Touch is compatible with all Bamboo-Lab printers firmware versions up until: P1P v01.05.02.00, P1S v01.05.02.00, X1C v01.07.02.00, A1 v01.01.01.00, A1 Mini v01.01.03.00. It is possible that Bamboo-Lab release a future firmware which impacts some functions of Panda Touch. We will monitor all beta firmwares, and will get you informed via Amazon or our social channel if any firmware is found affected. NOTE: Warranty DOES NOT cover function lost by a firmware update.
About Firmware Update
Firmware V01.06.00.00 was released for Bambu P1S recently, which disables panda touch’s control over the hotend, bed heaters and print start functionality when operating in cloud mode. BTT is now testing firmware V1.0.4 to solve this problem, please pay attention to our social group and github for update. NOTE: Functionality remains completely enabled if P1S is operating in LAN only mode. And functionality in LAN/Cloud modes are enabled if firmware remains v01.05.02.00.
My main channel @Just Vlad
As an Amazon Associate I earn from qualifying purchases
Cool system! The only gripe I have with these screen replacements is that it would look a lot cleaner if you could just replace the OEM screen so you don't have two screens visible. Maybe it's just my OCD, but someone needs to get on that! lol
Gotta get me 3 of these!
If you have 3 printers you may buy just one screen and keep it by the computer, and use it to operate 3 printers from one point. Going for inspection you may take the screen with you and operate whole farm with one screen.
cool video man, but just saying its i^2c :)
thank you, that was useful
nice!
Though its very expensive (96€ in Europe which translates to 105 USD at the moment of writing this).
Can you use LAN mode for direct upload from slicer? Also can you enable camera for monitoring multiple printers simultaneously?
I don't know why they just can't put a decent screen on the P1P and P1S from the factory like the Creality ones.
Because it’s cheaper than the X1 carbon so they don’t add a screen
On the webside where this is selling it says its only compatible with firmware 1.5. wich firmware are you on?
Hey man there is a beta update which allows you to use it with the 1.6 firmware. You will just have to request for access. It works fine for me!
Im the first to comment 🎉
but if I'm not mistaken, it doesn't *add* any features, it just gives you a bigger screen to do what you already can do with the crappy little screen.
You can control the AMS which the built-in screen can't do
Can you see a preview of the files???