วีดีโอ

can someone explain why my nuzzle and bed are so far away from each other that turning the wheels doesnt help?

I just buy the QIDI Q1 Pro but I have problem for print, I check the temperature on hotend with thermal camera and i see I have only 72 deg C maximum on hotend outside when I setup for PLA 220 deg C. If you can please check with thermal camera what temperature on hotend you have on your Q1 Pro, thank you.

I just buy the QIDI Q1 Pro but I have problem for print, I check the temperature on hotend with thermal camera and i see I have only 72 deg C maximum on hotend outside when I setup for PLA 220 deg C. If you can please check with thermal camera what temperature on hotend you have on your Q1 Pro, thank you.

And remember you have to heat the bed before leveling and using the paper to manually level is the only way to keep it from dragging the print off raise tip up the height of Your piece of paper and Print away!!

Way Awesome never printed before printed a Beautiful Rabbit while following Your every step You Are AMAZING!! Teach on!!! FYI guys heat bed to 100 degrees filament 240 sticks to bed every time Thanks Man!! Priceless info!!

When you get so many fails you may have to look for mechanical setup , filament , settings etc. It's not much good if a small section looks good and the leg falls off ! Sorry , to disagree , but I don't think you had a print that was a good except the benchy and toothpaste squeezer.

Fun fact- 1+1 is not 3 but is in fact 2

Where to download this Spiral vase model? @Just_Print

ABSOLUTE BEST BEGINNER VIDEO AS WELL AS VIDEO EXPLAININGTHIS SPECIFIC MACHINE! THANKYOU SO SO MUCH!

I just picked up the pro, first every printer I’ve bought. Absolutely love how easy this is to use especially since it’s my first printer

I have k1c and can not say anything good about it! Its halve baked product, camera dont work good, the lit needs to be off all the time or it falls of! Software and slicer are really bad, the app is also a rip off, 90% u need to pay premium for stl files, and its all fidgets and keychain and small figures. You can not trust this printer, wifi connection is bad even next to router, camera view always error and need to refresh it takes more time to refresh then to walk to the printer! Ots use useless

never had a resin printer but definitely very interesting

does this printer have 2 Z motors?

Thanks

I got the Saturn 4 ultra and that vibrating sound the vat makes me crazy! its so loud, how do we fix it?

So it doesn’t come with filament?

I just got mine yesterday. So far i have done 2 prints and its crazy how good they look, the Mars 5 ultra is just a beast

Thanks for the advice on the bottom exposure. I gave up and grabbed a whambam magnet. Between that and your advice hopefully I'll be able to get a print that doesnt shatter when trying to take it off the plate.

hey weird question that does not relate to printing lol, what camera and or mic setup do you use to record your videos?

hey love ur vids. Just got the A1 and I don't see a toggle switch for the 115v/230v ?? Is there none on this printer? I can't find and info on this anywhere uggg

Does it use film or liquid for printing ? Want to get in 3d so looking for my first printer to buy

@JustPrint, how much is this?

Great review! I just got my A1c delivered on Monday and had it up and printing in just over 30 minutes. I really like being able to send my prints from my computer wirelessly and the Bambu remote application is working seamlessly. I know that everyone reading this is just yawning right now but, I guess I should mention that this is my first 3D printer and that I am 73 years old. If I can figure this out, anyone can. Thanks for reinforcing my choice for my first 3D printer.

Thank you ...

My off set is almost at 2.0 is that normal?

Thank you, I just got mine and the instructions booklet was pretty rough.

Can you use the printer without creating a Bambo Lab account?

Super careful and very helpful, thanks for this video!

Great video. Thank you for showing off both the good and bad, and not just the good. I've had this printer for a few weeks and overall I have really enjoyed it. I agree that the quality is a little cheap, but the actual functionality and where it counts is very good. This is the best printer for people who want to print higher end materials but don't want to spend too much money. Question: Sorry if you already mentioned it, but do you use glue for everything you print? At first I tried no glue and nothing stuck, so I just always use glue. But maybe I just need to adjust my z offset? I'd rather not use glue if I don't have to.

my module's don't seem to have any sort of identification markers on them or the boxes they came in. How would I know which ones to use for assembly? They all appear to be the same size, etc.

It's bs.. I sit there a level it twice..... then I starts out fine played the bead down then gets 1/4 of the way up or 3 or 4 hours tillbits done.. and you can hear the nozzle rubbing on the print.. eventually lifting the print off the damn bed.. like wtf am I doing wrong.

how can I find pin code on p1p when trying to add a printer

I've done this 35 times now, and followed perhaps 15 other videos to the letter, and it's still printing spaghetti. Whole thing is about to go into the trash and get replaced with a Bambu Lab printer.

Worst wifi of all time. I feel like they really didn't make this a priority. I get so frustrated with the weak signal on this thing. I rent. Router is upstairs. I get great service on my desktop wifi but my printer won't talk to my pc sometimes. I have to restart the machine after EVERY PRINT. Even though I can turn the light on and off quick...it sometimes refuses to download. I can try to start a print from my phone but even then it barely works.

orca slicer conveniently on your pc eh?....and i got excited when you started walking through the software stuff ...you know what happens when I open the thumb drive that came with printer? A gazillion files ...of which I don't know what 99% of them do lol

My printer had all kinds of problems. The top of the iceberg was those wrenches didnt even fit the nuts.

Prints have been decent since I got my Max Neo, then recently decided to fix the banding. Like yours, the x-axis gantry was off by just over 3mm on one side. So together with correcting that and adding new plum couplers, I reckon that's all I need for now. Thanks for the video 👍

hey man i just got the printer and got everything set up. But my issues are when i send it to the usb it shows but doesnt allow me to print , i kept trying to see how to get it to print from the network but still doesnt show . lease help

Very useful. Thank you for making this awesome video

Bro im legit missing that piece specifically. The clip holder

good video thank you :)

Thank you so much, I needed advice on putting those first four screws in, without putting the printer at risk

Thanks for the info, what if the resin is not water washable? how can i clean the tank? do i have to clean it with IPA?

now it's a question of how to clean your machine once there is too much resin in it?

i bought one two years ago, question, I have a very very small room in my parents place. Is it loud and do i need ventilation?

Just another video that doesn't set Z=0 and tight the screws in the wrong order. Is it that hard to read the manual?

You are a lifesaver. I am packing my A1 for a return and was struggling to do it. Thanks!

Best way to level ????

Thanks for the demonstration…. Do they make a larger version of this to make 1/6 scale parts?

Cool system! The only gripe I have with these screen replacements is that it would look a lot cleaner if you could just replace the OEM screen so you don't have two screens visible. Maybe it's just my OCD, but someone needs to get on that! lol